Triple, Low-Distortion High-Speed Rail-to-Rail Output Operational Amplifiers
Product details
Parameters
Package | Pins | Size
Features
- High Speed
- 100 MHz Bandwidth (-3 dB, G = 2)
- 900 V/µs Slew Rate
- Excellent Video Performance
- 50 MHz Bandwidth (0.1 dB, G = 2)
- 0.007% Differential Gain
- 0.007° Differential Phase
- Rail-to-Rail Output Swing
- VO = -4.5 / 4.5 (RL= 150 Ω)
- High Output Drive, IO = 100 mA (typ)
- Ultralow Distortion
- HD2 = -78 dBc (f = 5 MHz, RL = 150 Ω)
- HD3 = -85 dBc (f = 5 MHz, RL = 150 Ω)
- Wide Range of Power Supplies
- VS = 3 V to 15 V
- APPLICATIONS
- Video Line Driver
- Imaging
- DVD / CD ROM
- Active Filtering
- General Purpose Signal Chain Conditioning
Description
The SN1050x family is a set of rail-to-rail output single, dual, and triple low-voltage, high-output swing, low-distortion high-speed amplifiers ideal for driving data converters, video switching, or low distortion applications. This family of voltage-feedback amplifiers can operate from a single 15-V power supply down to a single 3-V power supply while consuming only 14 mA of quiescent current per channel. In addition, the family offers excellent ac performance with 100-MHz bandwidth, 900-V/µs slew rate and harmonic distortion (THD) at -78 dBc at 5 MHz.
Technical documentation
No results found. Please clear your search and try again.
View all 6 | Type | Title | Date | |
|---|---|---|---|
| * | Data sheet | High-Speed Rail-to-Rail Output Video Amplifiers datasheet (Rev. B) | Jan. 29, 2004 |
| Technical article | How to reduce distortion in high-voltage, high-frequency signal generation for AWGs | Oct. 30, 2018 | |
| Technical article | What are the advantages of using JFET-input amplifiers in high-speed applications? | Jun. 19, 2018 | |
| Technical article | Unique active mux capability combines buffer and switch into one solution | Oct. 10, 2017 | |
| E-book | The Signal e-book: A compendium of blog posts on op amp design topics | Mar. 28, 2017 | |
| Technical article | How to minimize filter loss when you drive an ADC | Oct. 20, 2016 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.Design tools & simulation
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
- Leverages Cadence PSpice Technology
- Preinstalled library with a suite of digital models to enable worst-case timing analysis
- Dynamic updates ensure you have access to most current device models
- Optimized for simulation speed without loss of accuracy
- Supports simultaneous analysis of multiple products
- (...)
TINA-TI — TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
ANALOG-ENGINEER-CALC — The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
Features
- Expedites circuit design with analog-to-digital converters (ADCs) and digital-to-analog converters (DACs)
- Noise calculations
- Common unit translation
- Solves common amplifier circuit design problems
- Gain selections using standard resistors
- Filter configurations
- Total noise for common amplifier configurations
- (...)
VOLT-DIVIDER-CALC — VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.
(...)
CAD/CAE symbols
| Package | Pins | Download |
|---|---|---|
| HTSSOP (PWP) | 14 | View options |
| SOIC (D) | 14 | View options |
Ordering & quality
Information included:
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.