Top

Product details

Parameters

Technology Family LV1T Gate type NAND Bits (#) 1 High input voltage (Min) (Vih) 1 High input voltage (Max) (Vih) 5.5 Output voltage (Min) (V) 1.65 Output voltage (Max) (V) 5.5 IOH (Max) (mA) -8 IOL (Max) (mA) 8 open-in-new Find other Voltage translating gates

Package | Pins | Size

SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 SOT-SC70 (DCK) 5 4 mm² 2 x 2.1 open-in-new Find other Voltage translating gates

Features

  • Single-Supply Voltage Translator at 5.0/3.3/2.5/1.8V VCC
  • Operating Range of 1.8V to 5.5V
  • Up Translation
    • 1.2V(1) to 1.8V at 1.8V VCC
    • 1.5V(1) to 2.5V at 2.5V VCC
    • 1.8V(1) to 3.3V at 3.3V VCC
    • 3.3V to 5.0V at 5.0V VCC
  • Down Translation
    • 3.3V to 1.8V at 1.8V VCC
    • 3.3V to 2.5V at 2.5V VCC
    • 5.0V to 3.3V at 3.3V VCC
  • Logic Output is Referenced to VCC
  • Output Drive
    • 8mA Output Drive at 5V
    • 7mA Output Drive at 3.3V
    • 3mA Output Drive at 1.8V
  • Characterized up to 50MHz at 3.3V VCC
  • 5V Tolerance on Input Pins
  • –40°C to 125°C Operating Temperature Range
  • Pb-Free Packages Available: SC-70 (DCK)
    • 2 × 2.1 × 0.65 mm
  • Latch-Up Performance Exceeds 250mA
    Per JESD 17
  • ESD Performance Tested Per JESD 22
    • 2000-V Human-Body Model
      (A114-B, Class II)
    • 200-V Machine Model (A115-A)
    • 1000-V Charged-Device Model (C101)
  • Supports Standard Logic Pinouts
  • CMOS Output B Compatible with AUP1G and LVC1G Families Refer to the VIH/VIL and output drive for lower VCC condition.
open-in-new Find other Voltage translating gates

Description

SN74LV1T00 is a low voltage CMOS gate logic that operates at a wider voltage range for industrial, portable, telecom, and automotive applications. The output level is referenced to the supply voltage and is able to support 1.8V/2.5V/3.3V/5V CMOS levels.

The input is designed with a lower threshold circuit to match 1.8V input logic at VCC = 3.3V and can be used in 1.8V to 3.3V level up translation. In addition, the 5V tolerant input pins enable down translation (e.g. 3.3V to 2.5V output at VCC = 2.5V). The wide VCC range of 1.8V to 5.5V allows generation of desired output levels to connect to controllers or processors.

The SN74LV1T00 is designed with current-drive capability of 8 mA to reduce line reflections, overshoot, and undershoot caused by high-drive outputs.

open-in-new Find other Voltage translating gates
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 6
Type Title Date
* Datasheet Single Power Supply 2-INPUT POSITIVE NAND GATE CMOS Logic Level Shifter datasheet (Rev. B) Feb. 21, 2014
Selection guide Voltage translation buying guide Jun. 13, 2019
Application note Voltage Translation Between 3.3-V, 2.5-V, 1.8-V, and 1.5-V Logic Standards (Rev. B) Apr. 30, 2015
Application note LV1T Family of single supply translators (Rev. A) Dec. 29, 2014
Application note Voltage Translation Between 3.3-V, 2.5-V, 1.8-V, and 1.5-V Logic Standards (Rev. A) Jul. 08, 2004
Application note Selecting the Right Level Translation Solution (Rev. A) Jun. 22, 2004

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
10
Description
Flexible EVM designed to support any device that has a DCK, DCT, DCU, DRL, or DBV package in a 5 to 8 pin count.
Features
  • Board design allows for versatility in evaluation
  • Supports a wide-range of logic devices

Design tools & simulation

SIMULATION MODEL Download
SCLM103A.ZIP (43 KB) - IBIS Model
SIMULATION MODEL Download
SCLM187.ZIP (7 KB) - PSpice Model

Reference designs

REFERENCE DESIGNS Download
Battery Tester Reference Design for High Current Applications
TIDA-01040 — Li-Ion battery formation and electrical testing require accurate voltage and current control, usually to better than ±0.05% over the specified temperature range.  This reference design proposes a solution for high-current (up to 50 A) battery tester applications supporting input (bus (...)
document-generic Schematic
REFERENCE DESIGNS Download
Battery tester reference design for multi-phase high-precision 0.5 to 100 A battery formation
TIDA-01041 — This reference design provides a multi-phase solution for a wide range of current battery test applications. Leveraging the dual phase buck/boost controller LM5170's daisy chain configuration gives the design the ability to achieve 100A charging/discharging rates. Utilizing high accuracy constant (...)
document-generic Schematic
REFERENCE DESIGNS Download
Modular battery tester reference design for 50-A, 100-A, and 200-A applications
TIDA-01042 — This reference design provides a modular battery test solution allowing users to have the flexibility to test batteries at different current levels with one design. This design leverages the TIDA-01041 reference design by providing two 100-A battery testers that can work independently or be (...)
document-generic Schematic

CAD/CAE symbols

Package Pins Download
SC70 (DCK) 5 View options
SOT-23 (DBV) 5 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos