SN74LVC1G125-Q1

ACTIVE

Automotive Catalog Single Bus Buffer Gate With 3-State Output

Top
Automotive Catalog Single Bus Buffer Gate With 3-State Output

SN74LVC1G125-Q1

ACTIVE

Product details

Parameters

Technology Family LVC VCC (Min) (V) 1.65 VCC (Max) (V) 5.5 Channels (#) 1 IOL (Max) (mA) 32 IOH (Max) (mA) -32 Input type Standard CMOS Output type 3-State Features Balanced outputs, Very high speed (tpd 5-10ns), Partial power down (Ioff), Over-voltage tolerant inputs Data rate (Mbps) 300 Rating Automotive open-in-new Find other Non-Inverting buffer/driver

Package | Pins | Size

SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 SOT-SC70 (DCK) 5 4 mm² 2 x 2.1 USON (DRY) 6 1 mm² 1.5 x 1 open-in-new Find other Non-Inverting buffer/driver

Features

  • AEC-Q100 Qualified With the Following Results:
    • Device Temperature Grade 1: –40°C to +125°C Ambient Operating Temperature Range
    • Device Human-Body Model (HBM) ESD Classification Level 2
    • Device Charged-Device Model (CDM) ESD Classification Level C5
  • Available in the small 1.45-mm2 package (DRY) With 0.5-mm Pitch
  • Supports 5-V VCC Operation
  • Over-voltage tolerant inputs accept voltages to 5.5 V
  • Provides down translation to VCC
  • Max tpd of 3.7 ns at 3.3 V
  • Low power consumption, 10-µA Max ICC
  • ±24-mA Output drive at 3.3 V
  • Ioff supports live insertion, partial-power-down mode, and back-drive protection
  • Latch-up performance exceeds 100 mA Per JESD 78, Class II

All trademarks are the property of their respective owners.

open-in-new Find other Non-Inverting buffer/driver

Description

This bus buffer gate is designed for 1.65-V to 5.5-V VCC operation.

The SN74LVC1G125-Q1 device is a single line driver with a 3-state output. The output is disabled when the output-enable ( OE) input is high.

The CMOS device has high output drive while maintaining low static power dissipation over a broad VCC operating range.

The SN74LVC1G125-Q1 device is available in a variety of packages including the small DRY package with a body size of 1.45 mm × 1.00 mm.

open-in-new Find other Non-Inverting buffer/driver
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 31
Type Title Date
* Datasheet SN74LVC1G125-Q1 Single-BUS buffer gate with 3-state output datasheet (Rev. E) Aug. 12, 2020
Application notes Optimizing On-Board and Wireless Charger Systems Using Logic and Translation Sep. 24, 2019
Selection guides Little Logic Guide 2018 (Rev. G) Jul. 06, 2018
Selection guides Logic Guide (Rev. AB) Jun. 12, 2017
Application notes How to Select Little Logic (Rev. A) Jul. 26, 2016
Application notes Implications of Slow or Floating CMOS Inputs (Rev. D) Jun. 23, 2016
Application notes Understanding and Interpreting Standard-Logic Data Sheets (Rev. C) Dec. 02, 2015
More literature Automotive Logic Devices Brochure Aug. 27, 2014
User guides LOGIC Pocket Data Book (Rev. B) Jan. 16, 2007
More literature Design Summary for WCSP Little Logic (Rev. B) Nov. 04, 2004
Application notes Semiconductor Packing Material Electrostatic Discharge (ESD) Protection Jul. 08, 2004
Application notes Selecting the Right Level Translation Solution (Rev. A) Jun. 22, 2004
User guides Signal Switch Data Book (Rev. A) Nov. 14, 2003
Application notes Use of the CMOS Unbuffered Inverter in Oscillator Circuits Nov. 06, 2003
More literature Logic Cross-Reference (Rev. A) Oct. 07, 2003
User guides LVC and LV Low-Voltage CMOS Logic Data Book (Rev. B) Dec. 18, 2002
Application notes Texas Instruments Little Logic Application Report Nov. 01, 2002
Application notes TI IBIS File Creation, Validation, and Distribution Processes Aug. 29, 2002
More literature Standard Linear & Logic for PCs, Servers & Motherboards Jun. 13, 2002
Application notes 16-Bit Widebus Logic Families in 56-Ball, 0.65-mm Pitch Very Thin Fine-Pitch BGA (Rev. B) May 22, 2002
Application notes Power-Up 3-State (PU3S) Circuits in TI Standard Logic Devices May 10, 2002
More literature STANDARD LINEAR AND LOGIC FOR DVD/VCD PLAYERS Mar. 27, 2002
More literature Military Low Voltage Solutions Apr. 04, 2001
Application notes Migration From 3.3-V To 2.5-V Power Supplies For Logic Devices Dec. 01, 1997
Application notes Bus-Interface Devices With Output-Damping Resistors Or Reduced-Drive Outputs (Rev. A) Aug. 01, 1997
Application notes CMOS Power Consumption and CPD Calculation (Rev. B) Jun. 01, 1997
Application notes LVC Characterization Information Dec. 01, 1996
Application notes Input and Output Characteristics of Digital Integrated Circuits Oct. 01, 1996
Application notes Live Insertion Oct. 01, 1996
User guides Low-Voltage Logic (LVC) Designer's Guide Sep. 01, 1996
Application notes Understanding Advanced Bus-Interface Products Design Guide May 01, 1996

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
10
Description
Flexible EVM designed to support any device that has a DCK, DCT, DCU, DRL, or DBV package in a 5 to 8 pin count.
Features
  • Board design allows for versatility in evaluation
  • Supports a wide-range of logic devices

Design tools & simulation

SIMULATION MODELS Download
SCEM639.ZIP (7 KB) - PSpice Model

Reference designs

REFERENCE DESIGNS Download
ADAS multi-sensor hub reference design with quad 4-Gbps FPD-Link III, dual CSI-2 output, and PoC
TIDA-01323 — The TIDA-01323 camera hub reference design allows connection of up to four 2-megapixel, 60-fps cameras over coax cable. This design utilizes these coax cables to provide power, back-channel communication, and clock synchronization to the sensors. The 4-Gbps FPD-Link III quad deserializer supports (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Automotive ADAS Reference Design for Four Camera Hub with Integrated ISP and DVP Outputs
TIDA-00455 — The TIDA-00455 camera hub reference design allows up to four 1.3 Megapixel cameras to be connected to a TDA2x SoC Evaluation Module (EVM). Each camera connects to the hub through a single coax cable.  There are two OmniVision OV490 ISPs on the board that process the video and export it in (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
Automotive ADAS Reference Design for Four Camera Hub with MIPI CSI-2 Output
TIDA-01005 — This camera hub reference design allows connection of up to four 1.3-megapixel cameras to a TDA3x system-on-chip (SoC) evaluation module (EVM). Each camera connects to the hub through a single coax cable. Using FPD-Link III connections, the cameras are connected to a four-port deserializer. The (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SC70 (DCK) 5 View options
SON (DRY) 6 View options
SOT-23 (DBV) 5 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos