Home Audio Audio amplifiers Speaker amps
Home
Audio
Audio amplifiers
Speaker amps

TAS2780

ACTIVE

25-W, digital input, 4.5-V to 24-V 6-A peak smart amp with I/V sense for speaker protection

Order now
Data sheet

TAS2780

ACTIVE
Data sheet Order now

Product details

Audio input type Digital Input Architecture Class-D, Smart Amp Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 24 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Output power (W) 25 Iq (typ) (mA) 9.2 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 3 Analog supply voltage (max) (V) 24 Sampling rate (max) (kHz) 96 PSRR (dB) 110 Operating temperature range (°C) -40 to 85
Audio input type Digital Input Architecture Class-D, Smart Amp Speaker channels (max) Mono Rating Catalog Power stage supply (max) (V) 24 Power stage supply (min) (V) 4.5 Load (min) (Ω) 3.2 Output power (W) 25 Iq (typ) (mA) 9.2 Control interface I2C Closed/open loop Closed Analog supply (min) (V) 3 Analog supply voltage (max) (V) 24 Sampling rate (max) (kHz) 96 PSRR (dB) 110 Operating temperature range (°C) -40 to 85
VQFN-HR (RYA) 30 14 mm² 3.5 x 4
  • 24-V Supply for Class-D Output Stage
  • Y-Bridge Multi-Level Supply Architecture
  • Spread Spectrum Control
  • Ultrasonic Output Support up to 40 kHz
  • 25 W, 1% THD+N (4 Ω, 18 V)
  • 30 W Maximum Output Power, 10 % THD+N
  • 83% at 1W, 4 Ω, PVDD = 12 V, VBAT1S = 3.8 V
  • 83% at 1W, 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 85% at 1W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 89% at 15W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 93% at 15W , 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • <0.5 µA in Hardware Shutdown Mode
  • PVDD: 3 V to 24 V
  • VBAT1S: 2.7 V to 5.5 V
  • AVDD: 1.8 V
  • IOVDD: 1.8 V/ 3.3 V
  • SDOUT for Echo Cancellation
  • I2S/TDM: 8 Channels of 32 bits up to 96 KSPS
  • I2C: Selectable Addresses with Fast Mode+
  • Inter-Chip Communication Bus
  • 44.1 kHz to 96 kHz Sample Rates
  • Real-time IV-Sense for Speaker Protection
  • Short and Open Load Protection
  • Thermal and Over Current Protection
  • Brownout Protection with Power Limiter
  • Over Power and Low Battery Protection
  • PVDD and VBAT1S Supply Tracking Limiters
  • Thermal Foldback
  • Post Filter Feedback
  • Output Slew Rate Control
  • 24-V Supply for Class-D Output Stage
  • Y-Bridge Multi-Level Supply Architecture
  • Spread Spectrum Control
  • Ultrasonic Output Support up to 40 kHz
  • 25 W, 1% THD+N (4 Ω, 18 V)
  • 30 W Maximum Output Power, 10 % THD+N
  • 83% at 1W, 4 Ω, PVDD = 12 V, VBAT1S = 3.8 V
  • 83% at 1W, 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 85% at 1W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 89% at 15W, 4 Ω, PVDD = 18 V, VBAT1S = 5 V
  • 93% at 15W , 8 Ω, PVDD = 18 V, VBAT1S = 5 V
  • <0.5 µA in Hardware Shutdown Mode
  • PVDD: 3 V to 24 V
  • VBAT1S: 2.7 V to 5.5 V
  • AVDD: 1.8 V
  • IOVDD: 1.8 V/ 3.3 V
  • SDOUT for Echo Cancellation
  • I2S/TDM: 8 Channels of 32 bits up to 96 KSPS
  • I2C: Selectable Addresses with Fast Mode+
  • Inter-Chip Communication Bus
  • 44.1 kHz to 96 kHz Sample Rates
  • Real-time IV-Sense for Speaker Protection
  • Short and Open Load Protection
  • Thermal and Over Current Protection
  • Brownout Protection with Power Limiter
  • Over Power and Low Battery Protection
  • PVDD and VBAT1S Supply Tracking Limiters
  • Thermal Foldback
  • Post Filter Feedback
  • Output Slew Rate Control

The TAS2780 is a mono, digital input Class-D audio amplifier optimized for efficiently driving high peak power into loudspeakers. The Class-D amplifier is capable of delivering 25 W of continuous power into a 4 Ω load with less than 1% THD+N at a supply voltage of 18 V. The broad voltage input range and the high output power makes this amplifier versatile enough to work with battery or line powered systems.

The TAS2780 can be used as a conventional amp or with host-based speaker protection algorithms. The integrated speaker voltage and current sense provides for real time feedback of loudspeaker conditions to the protection algorithms through a return I2S path.

Y-Bridge power architecture improves amplifier efficiency by internally selecting the supplies for optimal headroom. Brownout prevention scheme with multiple thresholds allows reducing the gain in signal path when the supply drops.

Up to eight TAS2780 devices can share a common bus via I2S/TDM and I2C/SPI interfaces.

The TAS2780 is available in a 30 pin HR-QFN package for a compact PCB footprint.

The TAS2780 is a mono, digital input Class-D audio amplifier optimized for efficiently driving high peak power into loudspeakers. The Class-D amplifier is capable of delivering 25 W of continuous power into a 4 Ω load with less than 1% THD+N at a supply voltage of 18 V. The broad voltage input range and the high output power makes this amplifier versatile enough to work with battery or line powered systems.

The TAS2780 can be used as a conventional amp or with host-based speaker protection algorithms. The integrated speaker voltage and current sense provides for real time feedback of loudspeaker conditions to the protection algorithms through a return I2S path.

Y-Bridge power architecture improves amplifier efficiency by internally selecting the supplies for optimal headroom. Brownout prevention scheme with multiple thresholds allows reducing the gain in signal path when the supply drops.

Up to eight TAS2780 devices can share a common bus via I2S/TDM and I2C/SPI interfaces.

The TAS2780 is available in a 30 pin HR-QFN package for a compact PCB footprint.
open-in-new Find other Speaker amps
Download View video with transcript Video
 

Request more information

To request access to TAS2780 PurePath™ Console software and other design resources: Request now

Similar products you might be interested in

open-in-new Compare alternates
Similar functionality to the compared device
TAS2781 ACTIVE 25 W, 4.5-V to 23-V, digital-input integrated-audio-processing speaker-protection class-D amplifier With integrated DSP

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet TAS2780 Digital Input Mono Class-D Audio Amplifier With Speaker IV Sense datasheet (Rev. B) PDF | HTML 05 Jan 2023
Application note TAS27xx Introduction to Click and Pop Noise Measurement in Class-D Audio Amplifiers PDF | HTML 26 Mar 2024
Application note Y-Bridge in Class-D Amplifiers for Improving Efficiency PDF | HTML 19 Nov 2021
User guide TAS2780EVM User's Guide (Rev. A) 28 Oct 2021
Certificate TAS2780EVM EU RoHS Declaration of Conformity (DoC) 21 May 2021
Technical article How smart amps are bringing high-fidelity audio into the smart home PDF | HTML 03 May 2021
Application note Limitations of Capacitor only EMI Filters on Class-D Amplifiers PDF | HTML 21 Jul 2020
Application note Requesting Access to Audio Software 18 Jun 2020
Application note PCB Layout Guidelines for TAS2xxx Series Class-D Non-boosted Audio Amplifier 27 Jun 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TAS2780EVM — TAS2780 evaluation module digital input mono Class-D audio amplifier with speaker IV sense

The TAS2780EVM evaluation module (EVM) is used to evaluate the TAS2780, a digital input mono Class-D audio amplifier with speaker IV sense. The EVM is designed to be used as stand-alone evalution tool and provides the designer with the tools to integrate the TAS2780 amplifier into (...)

User guide: PDF
Not available on TI.com
Application software & framework

PUREPATHCONSOLE — PurePath™ Console graphical development suite for audio system design and development

PurePath™ Console is a highly integrated and easy-to-use audio development suite designed specifically to simplify the evaluation, configuration and debug process associated with the development of audio products. Watch how easy it is to use the PurePath™ Console 3 software.
PurePath Console’s (...)
Request
Software codec

TAS2XXX-DRIVERS — Linux driver for TI's TAS2XXX families

TAS2xxx Linux driver supports TI's TAS device families. This Linux driver implements a flexible and configurable register setting for one or multiple devices in a bin file, will enable fast development for applications.
Supported products & hardware

Supported products & hardware

Products
Speaker amps
TAS2780 — 25-W, digital input, 4.5-V to 24-V 6-A peak smart amp with I/V sense for speaker protection TAS2770 — 20-W, digital input, 4.5- to 18-V smart amp with I/V sense for speaker protection TAS2110 — 6.1W mono digital input Class-D speaker amp with integrated 11V Class-H boost
Launch Download options
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Package Pins Download
VQFN-HR (RYA) 30 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos