Product details

Architecture Voltage FB Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 10 Total supply voltage (Max) (+5V=5, +/-5V=10) 30 GBW (Typ) (MHz) 120 BW @ Acl (MHz) 100 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 100 Vn at flatband (Typ) (nV/rtHz) 1.6 Vn at 1 kHz (Typ) (nV/rtHz) 1.6 Iq per channel (Typ) (mA) 8.5 Vos (offset voltage @ 25 C) (Max) (mV) 2 Rail-to-rail No Rating Catalog Operating temperature range (C) 0 to 70, -40 to 85 CMRR (Typ) (dB) 95 Input bias current (Max) (pA) 6000000 Offset drift (Typ) (uV/C) 2 Output current (Typ) (mA) 90 2nd harmonic (dBc) 81 3rd harmonic (dBc) 81 @ MHz 1
Architecture Voltage FB Number of channels (#) 1 Total supply voltage (Min) (+5V=5, +/-5V=10) 10 Total supply voltage (Max) (+5V=5, +/-5V=10) 30 GBW (Typ) (MHz) 120 BW @ Acl (MHz) 100 Acl, min spec gain (V/V) 1 Slew rate (Typ) (V/us) 100 Vn at flatband (Typ) (nV/rtHz) 1.6 Vn at 1 kHz (Typ) (nV/rtHz) 1.6 Iq per channel (Typ) (mA) 8.5 Vos (offset voltage @ 25 C) (Max) (mV) 2 Rail-to-rail No Rating Catalog Operating temperature range (C) 0 to 70, -40 to 85 CMRR (Typ) (dB) 95 Input bias current (Max) (pA) 6000000 Offset drift (Typ) (uV/C) 2 Output current (Typ) (mA) 90 2nd harmonic (dBc) 81 3rd harmonic (dBc) 81 @ MHz 1
HVSSOP (DGN) 8 9 mm² 3 x 3 SOIC (D) 8 19 mm² 3.91 x 4.9
  • Ultra-Low 1.6 nV/√Hz Voltage Noise
  • High Speed:
    • 100-MHz Bandwidth [G = 2 (–1), –3 dB]
    • 100-V/µs Slew Rate
  • Very Low Distortion
    • THD = –72 dBc (f = 1 MHz, RL = 150 Ω)
    • THD = –90 dBc (f = 1 MHz, RL = 1 kΩ)
  • Low 0.5-mV (Typical) Input Offset Voltage
  • 90-mA Output Current Drive (Typical)
  • Typical Operation from ±5 V to ±15 V
  • Available in Standard SOIC and MSOP-PowerPAD™, Packages
  • Evaluation Module Available
  • Ultra-Low 1.6 nV/√Hz Voltage Noise
  • High Speed:
    • 100-MHz Bandwidth [G = 2 (–1), –3 dB]
    • 100-V/µs Slew Rate
  • Very Low Distortion
    • THD = –72 dBc (f = 1 MHz, RL = 150 Ω)
    • THD = –90 dBc (f = 1 MHz, RL = 1 kΩ)
  • Low 0.5-mV (Typical) Input Offset Voltage
  • 90-mA Output Current Drive (Typical)
  • Typical Operation from ±5 V to ±15 V
  • Available in Standard SOIC and MSOP-PowerPAD™, Packages
  • Evaluation Module Available

The THS4031 and THS4032 are ultra-low voltage noise, high-speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. The single amplifier THS4031 and the dual amplifier THS4032 offer good AC performance with 100-MHz bandwidth (G = 2), 100-V/µs slew rate, and 60-ns settling time (0.1%). The THS4031 and THS4032 are unity-gain stable with 275-MHz bandwidth. These amplifiers have a high drive capability of 90 mA and draw only 8.5-mA supply current per channel. With –90 dBc of total harmonic distortion (THD) at f = 1 MHz and a very low noise of 1.6 nV/√Hz, the THS4031 and THS4032 are designed for applications requiring low distortion and low noise such as buffering analog-to-digital converters.

The THS4031 and THS4032 are ultra-low voltage noise, high-speed voltage feedback amplifiers that are ideal for applications requiring low voltage noise, including communications and imaging. The single amplifier THS4031 and the dual amplifier THS4032 offer good AC performance with 100-MHz bandwidth (G = 2), 100-V/µs slew rate, and 60-ns settling time (0.1%). The THS4031 and THS4032 are unity-gain stable with 275-MHz bandwidth. These amplifiers have a high drive capability of 90 mA and draw only 8.5-mA supply current per channel. With –90 dBc of total harmonic distortion (THD) at f = 1 MHz and a very low noise of 1.6 nV/√Hz, the THS4031 and THS4032 are designed for applications requiring low distortion and low noise such as buffering analog-to-digital converters.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet THS403x 100-MHz Low-Noise High-Speed Amplifiers datasheet (Rev. I) 17 May 2018
E-book The Signal e-book: A compendium of blog posts on op amp design topics 28 Mar 2017
Analog Design Journal Accurately measuring ADC driving-circuit settling time (Rev. A) 18 May 2015
Application note Wideband Complementary Current Output DAC Single-Ended Interface (Rev. A) 08 May 2015
Technical article Preventing output polarity inversion in high-speed amplifiers 26 Nov 2014
Application note Low Power Input and Reference Driver Circuit for ADS8318 and ADS8319 24 Jun 2009
Application note Noise Analysis for High Speed Op Amps (Rev. A) 17 Jan 2005
More literature THS4031M/5962-9959501QxA 120-MHz Low-Noise, High-Speed Amplifier 18 May 2000
User guide THS4031 High-Speed Operational Amplifier EVM User's Guide 24 Jun 1999

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

THS4031EVM — THS4031 High Speed Amplifier Evaluation Module

The THS4031 high-speed operational amplifier evaluation module (EVM) is a complete high-speed amplifier circuit. It consists of the THS4031 high-speed, low-power operational amplifier IC, along with a small number of passive parts, mounted on a small circuit board measuring approximately 1.7 inch (...)

Simulation model

THS4031 PSpice Model (Rev. A)

SLOJ005A.ZIP (6 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Calculation tool

ANALOG-ENGINEER-CALC — Analog engineer's calculator

The Analog Engineer’s Calculator is designed to speed up many of the repetitive calculations that analog circuit design engineers use on a regular basis. This PC-based tool provides a graphical interface with a list of various common calculations ranging from setting op-amp gain with feedback (...)
lock = Requires export approval (1 minute)
Calculation tool

VOLT-DIVIDER-CALC — Voltage Divider Determines A Set of Resistors for a Voltage Divider

VOLT-DIVIDER-CALC quickly determines a set of resistors for a voltage divider. This KnowledgeBase Javascript utility can be used to find a set of resistors for a voltage divider to achieve the desired output voltage. This calculator can also be used to design non-inverting attentuation circuits.

(...)

Package Pins Download
HVSSOP (DGN) 8 View options
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos