Product details

VO (V) 1.24 Reference voltage Adjustable Initial accuracy (Max) (%) 1 VO adj (Min) (V) 1.24 VO adj (Max) (V) 6 Iz for regulation (Min) (uA) 55 Rating Catalog Temp coeff (Max) (ppm/ degree C) 138 Operating temperature range (C) -40 to 125, -40 to 85, 0 to 70 Iout/Iz (Max) (mA) 15
VO (V) 1.24 Reference voltage Adjustable Initial accuracy (Max) (%) 1 VO adj (Min) (V) 1.24 VO adj (Max) (V) 6 Iz for regulation (Min) (uA) 55 Rating Catalog Temp coeff (Max) (ppm/ degree C) 138 Operating temperature range (C) -40 to 125, -40 to 85, 0 to 70 Iout/Iz (Max) (mA) 15
SOIC (D) 8 19 mm² 3.91 x 4.9 SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 SOT-23 (DBZ) 3 7 mm² 2.92 x 2.37 SOT-89 (PK) 3 18 mm² 4.5 x 4.095 TO-92 (LP) 3 19 mm² 5.2 x 3.68
  • Low-Voltage Operation, VREF = 1.24 V
  • Adjustable Output Voltage, VO = VREF to 6 V
  • Reference Voltage Tolerances at 25°C
    • 0.5% for TLV431B
    • 1% for TLV431A
    • 1.5% for TLV431
  • Typical Temperature Drift
    • 4 mV (0°C to 70°C)
    • 6 mV (–40°C to 85°C)
    • 11 mV (–40°C to 125°C)
  • Low Operational Cathode Current, 80 µA Typical
  • 0.25-Ω Typical Output Impedance
  • Ultra-Small SC-70 Package Offers 40% Smaller Footprint Than SOT-23-3
  • See TLVH431 and TLVH432 for:
    • Wider VKA (1.24 V to 18 V) and IK (80 mA)
    • Additional SOT-89 Package
    • Multiple Pinouts for SOT-23-3 and SOT-89 Packages
  • On Products Compliant to MIL-PRF-38535,
    All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.
  • Low-Voltage Operation, VREF = 1.24 V
  • Adjustable Output Voltage, VO = VREF to 6 V
  • Reference Voltage Tolerances at 25°C
    • 0.5% for TLV431B
    • 1% for TLV431A
    • 1.5% for TLV431
  • Typical Temperature Drift
    • 4 mV (0°C to 70°C)
    • 6 mV (–40°C to 85°C)
    • 11 mV (–40°C to 125°C)
  • Low Operational Cathode Current, 80 µA Typical
  • 0.25-Ω Typical Output Impedance
  • Ultra-Small SC-70 Package Offers 40% Smaller Footprint Than SOT-23-3
  • See TLVH431 and TLVH432 for:
    • Wider VKA (1.24 V to 18 V) and IK (80 mA)
    • Additional SOT-89 Package
    • Multiple Pinouts for SOT-23-3 and SOT-89 Packages
  • On Products Compliant to MIL-PRF-38535,
    All Parameters Are Tested Unless Otherwise Noted. On All Other Products, Production Processing Does Not Necessarily Include Testing of All Parameters.

The TLV431 device is a low-voltage 3-terminal adjustable voltage reference with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1.24 V) and 6 V with two external resistors (see the Parameter Measurement Information section). These devices operate from a lower voltage (1.24 V) than the widely used TL431 and TL1431 shunt-regulator references.

When used with an optocoupler, the TLV431 device is an ideal voltage reference in isolated feedback circuits for 3-V to 3.3-V switching-mode power supplies. These devices have a typical output impedance of 0.25 Ω. Active output circuitry provides a very sharp turnon characteristic, making them excellent replacements for low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies.

The TLV431 device is a low-voltage 3-terminal adjustable voltage reference with specified thermal stability over applicable industrial and commercial temperature ranges. Output voltage can be set to any value between VREF (1.24 V) and 6 V with two external resistors (see the Parameter Measurement Information section). These devices operate from a lower voltage (1.24 V) than the widely used TL431 and TL1431 shunt-regulator references.

When used with an optocoupler, the TLV431 device is an ideal voltage reference in isolated feedback circuits for 3-V to 3.3-V switching-mode power supplies. These devices have a typical output impedance of 0.25 Ω. Active output circuitry provides a very sharp turnon characteristic, making them excellent replacements for low-voltage Zener diodes in many applications, including on-board regulation and adjustable power supplies.

Download

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
TL431LI ACTIVE Adjustable precision shunt regulator with optimized reference current (pin layout: KRA) TL431LI offers lower 63 ppm/°C temperature drift and higher initial accuracy at 2.4 V0.

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TLV431x Low-Voltage Adjustable Precision Shunt Regulator datasheet (Rev. X) 01 May 2018
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 28 Jun 2019
Application note Supplying TPS61200 With a Single Solar Cell (Rev. B) 06 Sep 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

MMWAVEPOEEVM — mmWave sensor power-over-ethernet (PoE) evaluation module

MMWAVEPOEEVM enables Power over Ethernet (PoE) for the TI mmWave sensors carrier card platform (MMWAVEICBOOST and compatible HW moduels sold separately). MMWAVEPOEEVM simplifies deployment for development, test, and production by providing power and data transmission over a single ethernet cable, (...)

In stock
Limit: 50
Evaluation board

TMDSCSK388 — DM38x Camera Starter Kit (CSK)

The DM38x Camera Starter Kit (CSK) enables developers to begin designing wireless or wired connected digital video applications, such as security cameras, car DVRs, endoscopes, action-wearable cameras, drones, video doorbells, baby monitors, and other connected video products.

The DM38x (...)

In stock
Limit: 1
Evaluation board

TMDXEVM368 — TMS320DM36x Evaluation Module

The TMS320DM36x Digital Video Evaluation Module (DVEVM) enables developers to start immediate evaluation of TI’s Digital Media (DMx) processors and begin building digital video applications such as IP security cameras, action cameras, drones, wearables, digital signage, video doorbells, and (...)

In stock
Limit: 1
Evaluation board

TMDXEVM388 — DM388 DaVinci Digital Media Processor Evaluation Module

The DM38x Digital Video Evaluation Module (DVEVM) enables developers to start immediate evaluation of the DM38x Digital Media Processors and begin building digital video applications such as IP security cameras, action cameras, drones, video doorbells, car digital video recorders and other digital (...)

Development kit

EVMK2G — 66AK2Gx (K2G) Evaluation Module

In stock
Limit: 5
Simulation model

TLV431 Family Unencrypted PSpice Transient and AC Model (Rev. A)

SLIM005A.ZIP (161 KB) - PSpice Model
Simulation model

TLV431 Family TINA-TI Transient and AC Spice Model

SLVM088.ZIP (3 KB) - TINA-TI Spice Model
Simulation model

TLV431 Family TINA-TI Transient Reference Design

SLVM089.TSC (45 KB) - TINA-TI Reference Design
Simulation model

TLV431 Family TINA-TI AC Reference Design

SLVM090.TSC (80 KB) - TINA-TI Reference Design
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Many TI reference designs include the TLV431A

Use our reference design selection tool to review and identify designs that best match your application and parameters.

Package Pins Download
SOIC (D) 8 View options
SOT-23 (DBV) 5 View options
SOT-23 (DBZ) 3 View options
SOT-89 (PK) 3 View options
TO-92 (LP) 3 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos