Product details

Continuous current (Max) (A) 20 Isolation working voltage VIOWM (rms) (V) 424 Sensitivity (Typ) (mV/A) 50, 100, 200, 400 Sensitivity error (%) 0.2 Sensitivity error drift (+/-) (Max) (ppm/°C) 50 Input offset current (+/-) (Max) (mA) 25 Input offset current drift (+/-) (Typ) (µA/°C) 0.1 Features Externally Driven Zero Current Reference Voltage Small signal bandwidth (kHz) 80 Supply voltage (Max) (V) 5.5 Supply voltage (Min) (V) 3 Iq (Max) (mA) 5 CMTI (kV/µs) 25
Continuous current (Max) (A) 20 Isolation working voltage VIOWM (rms) (V) 424 Sensitivity (Typ) (mV/A) 50, 100, 200, 400 Sensitivity error (%) 0.2 Sensitivity error drift (+/-) (Max) (ppm/°C) 50 Input offset current (+/-) (Max) (mA) 25 Input offset current drift (+/-) (Typ) (µA/°C) 0.1 Features Externally Driven Zero Current Reference Voltage Small signal bandwidth (kHz) 80 Supply voltage (Max) (V) 5.5 Supply voltage (Min) (V) 3 Iq (Max) (mA) 5 CMTI (kV/µs) 25
SOIC (D) 8 19 mm² 4.9 x 3.9
  • Total error: ±0.4% typical, ±0.9% maximum, –40°C to 85°C
    • Sensitivity error: ±0.4%
    • Offset error: 7 mA
    • Offset drift: 0.04 mA/°C
    • Linearity error: 0.05%
  • Lifetime and environmental drift: <±0.5%
  • 3-kVRMS isolation rating
  • Robust 600-V lifetime working voltage
  • Bidirectional and unidirectional current sensing
  • External reference voltage
  • Operating supply range: 3 V to 5.5 V
  • Signal bandwidth: 80 kHz
  • Multiple sensitivity options:
    • TMCS1100A1: 50 mV/A
    • TMCS1100A2: 100 mV/A
    • TMCS1100A3: 200 mV/A
    • TMCS1100A4: 400 mV/A
  • Safety related certifications
    • UL 1577 Component Recognition Program
    • IEC/CB 62368-1
  • Total error: ±0.4% typical, ±0.9% maximum, –40°C to 85°C
    • Sensitivity error: ±0.4%
    • Offset error: 7 mA
    • Offset drift: 0.04 mA/°C
    • Linearity error: 0.05%
  • Lifetime and environmental drift: <±0.5%
  • 3-kVRMS isolation rating
  • Robust 600-V lifetime working voltage
  • Bidirectional and unidirectional current sensing
  • External reference voltage
  • Operating supply range: 3 V to 5.5 V
  • Signal bandwidth: 80 kHz
  • Multiple sensitivity options:
    • TMCS1100A1: 50 mV/A
    • TMCS1100A2: 100 mV/A
    • TMCS1100A3: 200 mV/A
    • TMCS1100A4: 400 mV/A
  • Safety related certifications
    • UL 1577 Component Recognition Program
    • IEC/CB 62368-1

The TMCS1100 is a galvanically isolated Hall-effect current sensor capable of DC or AC current measurement with high accuracy, excellent linearity, and temperature stability. A low-drift, temperature-compensated signal chain provides < 1% full-scale error across the device temperature range.

The input current flows through an internal 1.8-mΩ conductor that generates a magnetic field measured by an integrated Hall-effect sensor. This structure eliminates external concentrators and simplifies design. Low conductor resistance minimizes power loss and thermal dissipation. Inherent galvanic insulation provides a 600-V lifetime working voltage and 3-kVRMS basic isolation between the current path and circuitry. Integrated electrical shielding enables excellent common-mode rejection and transient immunity.

The output voltage is proportional to the input current with four sensitivity options. Fixed sensitivity allows the TMCS1100 to operate from a single 3-V to 5.5-V power supply, eliminates ratiometry errors, and improves supply noise rejection. The current polarity is considered positive when flowing into the positive input pin. The VREF input pin provides a variable zero-current output voltage, enabling bidirectional or unidirectional current sensing.

The TMCS1100 draws a maximum supply current of 6 mA, and all sensitivity options are specified over the operating temperature range of –40°C to +125°C.

The TMCS1100 is a galvanically isolated Hall-effect current sensor capable of DC or AC current measurement with high accuracy, excellent linearity, and temperature stability. A low-drift, temperature-compensated signal chain provides < 1% full-scale error across the device temperature range.

The input current flows through an internal 1.8-mΩ conductor that generates a magnetic field measured by an integrated Hall-effect sensor. This structure eliminates external concentrators and simplifies design. Low conductor resistance minimizes power loss and thermal dissipation. Inherent galvanic insulation provides a 600-V lifetime working voltage and 3-kVRMS basic isolation between the current path and circuitry. Integrated electrical shielding enables excellent common-mode rejection and transient immunity.

The output voltage is proportional to the input current with four sensitivity options. Fixed sensitivity allows the TMCS1100 to operate from a single 3-V to 5.5-V power supply, eliminates ratiometry errors, and improves supply noise rejection. The current polarity is considered positive when flowing into the positive input pin. The VREF input pin provides a variable zero-current output voltage, enabling bidirectional or unidirectional current sensing.

The TMCS1100 draws a maximum supply current of 6 mA, and all sensitivity options are specified over the operating temperature range of –40°C to +125°C.

Download

TMCS1100 won a gold Leadership in Engineering Achievement Program (LEAP) Award in the Switches & Sensors category.

Similar products you might be interested in

open-in-new Compare products
Pin-for-pin with same functionality to the compared device.
TMCS1101 ACTIVE Precision isolated current sensor with internal reference The TMCS1101 has the same functionality but with an internal reference voltage
Similar functionality to the compared device.
NEW TMCS1107 ACTIVE 420-V isolated Hall-effect current sensor with internal reference This product is pin-to-pin with reduced voltage and accuracy

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TMCS1100EVM — TMCS1100 isolated Hall-effect current sensing evaluation module

The TMCS1100EVM is a tool intended to facilitate rapid, convenient use of the TMCS1100, an isolated Hall-effect precision crrent sense monitor utilizing an external reference.  This evaluation module allows the user to push the max operating current through the Hall-input side while measuring (...)
In stock
Limit: 3
Simulation model

TMCS1100 TINA-TI Reference Design (Rev. A)

SBOMB06A.TSC (171 KB) - TINA-TI Reference Design
Simulation model

TMCS1100 TINA-TI SPICE Model (Rev. B)

SBOMB07B.ZIP (27 KB) - TINA-TI Spice Model
Simulation model

TMCS1100A4 PSpice Model

SBOMBE3.ZIP (21 KB) - PSpice Model
Simulation model

TMCS1100A3 PSpice Model

SBOMBE5.ZIP (21 KB) - PSpice Model
Simulation model

TMCS1100A2 PSpice Model

SBOMBE6.ZIP (22 KB) - PSpice Model
Simulation model

TMCS1100A1 PSpice Model

SBOMBE7.ZIP (20 KB) - PSpice Model
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Reference designs

TIDA-010062 — 1-kW, 80 Plus titanium, GaN CCM totem pole bridgeless PFC and half-bridge LLC reference design

This reference design is a digitally controlled, compact 1-kW AC/DC power supply design for server power supply unit (PSU) and telecom rectifier applications. The highly efficient design supports two main power stages, including a front-end continuous conduction (...)
Reference designs

PMP40690 — 4-kW interleaved CCM totem pole bridgeless PFC reference design using C2000™ MCU and GaN

This reference design is a 4-kW interleaved CCM totem pole (TTPL) bridgeless PFC reference design using a 64-pin C2000™ microcontroller, LM3410 gallium nitride device and TMCS1100 hall sensor. It is based on TIDM-02008 bidirectional interleaved CCM TTPL bridgeless PFC reference (...)
Reference designs

TIDA-010059 — In-phase current-sense reference design for 230-VAC motor drives using hall-effect current sensors

This reference design features the Hall-effect current sensor, TMCS1100, that can measure currents with an absolute error of < 1% (–40 to 125°C) and provide a working isolation voltage of up to 600 V. The low-resistance in-package current sensing element and lack of need for high-side (...)
Package Pins Download
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos