Top

Product details

Parameters

Continuous current (Max) (A) 20 Sensitivity (Typ) (mV/A) 50, 100, 200, 400 Sensitivity error (%) 0.2 Sensitivity error drift (+/-) (Max) (ppm/°C) 50 Input offset current (+/-) (Max) (mA) 25 Input offset current drift (+/-) (Typ) (µA/°C) 0.1 Features Externally Driven Zero Current Reference Voltage Small signal bandwidth (kHz) 80 Supply voltage (Max) (V) 5.5 Supply voltage (Min) (V) 3 Iq (Max) (mA) 5 CMTI (kV/µs) 25 open-in-new Find other Hall-effect current sensors

Package | Pins | Size

SOIC (D) 8 19 mm² 4.9 x 3.9 open-in-new Find other Hall-effect current sensors

Features

  • Total error: ±0.4% typical, ±0.9% maximum, –40ºC to 85ºC
    • Sensitivity error: ±0.4%
    • Offset error: 7 mA
    • Offset drift: 0.04 mA/ºC
    • Linearity error: 0.05%
  • Lifetime and environmental drift: <±0.5%
  • 3-kVRMS isolation rating
  • Robust 600-V lifetime working voltage
  • Bidirectional and unidirectional current sensing
  • External reference voltage
  • Operating supply range: 3 V to 5.5 V
  • Signal bandwidth: 80 kHz
  • Multiple sensitivity options:
    • TMCS1100A1: 50 mV/A
    • TMCS1100A2: 100 mV/A
    • TMCS1100A3: 200 mV/A
    • TMCS1100A4: 400 mV/A
  • Safety related certifications (planned)
    • UL 1577 Component Recognition Program
    • IEC/CB 62368-1

All trademarks are the property of their respective owners.

open-in-new Find other Hall-effect current sensors

Description

The TMCS1100 is a galvanically isolated Hall-effect current sensor capable of dc or ac current measurement with high accuracy, excellent linearity, and temperature stability. A low-drift, temperature-compensated signal chain provides < 1% full-scale error across the device temperature range.

The input current flows through an internal 1.8-mΩ conductor that generates a magnetic field measured by an integrated Hall-effect sensor. This structure eliminates external concentrators and simplifies design. Low conductor resistance minimizes power loss and thermal dissipation. Inherent galvanic insulation provides a 600-V lifetime working voltage and 3-kVRMS basic isolation between the current path and circuitry. Integrated electrical shielding enables excellent common-mode rejection and transient immunity.

The output voltage is proportional to the input current with four sensitivity options. Fixed sensitivity allows the TMCS1100 to operate from a single 3-V to 5.5-V power supply, eliminates ratiometry errors, and improves supply noise rejection. The current polarity is considered positive when flowing into the positive input pin. The VREF input pin provides a variable zero-current output voltage, enabling bidirectional or unidirectional current sensing.

The TMCS1100 draws a maximum supply current of 6 mA, and all sensitivity options are specified over the operating temperature range of –40°C to +125°C.

open-in-new Find other Hall-effect current sensors
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality and pinout but is not an equivalent to the compared device:
NEW TMCS1101 ACTIVE Precision isolated current sensor with internal reference The TMCS1101 has the same functionality but with an internal reference voltage

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
59
Description
The TMCS1100EVM is a tool intended to facilitate rapid, convenient use of the TMCS1100, an isolated Hall-effect precision crrent sense monitor utilizing an external reference.  This evaluation module allows the user to push the max operating current through the Hall-input side while measuring (...)
Features
  • Evaluation of the TMCS1100Ax in all gain options
  • Test points to allow ease of acess to device pins
  • Large copper planes to help with heat dissipation
  • Large lug connectors to connect the EVM to large current carrying leads

Design tools & simulation

SIMULATION MODELS Download
SBOMB06A.TSC (171 KB) - TINA-TI Reference Design
SIMULATION MODELS Download
SBOMB07A.ZIP (26 KB) - TINA-TI Spice Model
SIMULATION MODELS Download
SBOMBE3.ZIP (21 KB) - PSpice Model
SIMULATION MODELS Download
SBOMBE5.ZIP (21 KB) - PSpice Model
SIMULATION MODELS Download
SBOMBE6.ZIP (22 KB) - PSpice Model
SIMULATION MODELS Download
SBOMBE7.ZIP (20 KB) - PSpice Model

Reference designs

REFERENCE DESIGNS Download
High-efficiency, low-emission, isolated DC/DC converter-based analog input module reference design
TIDA-010065 — This reference design is a simplified architecture for generating an isolated power supply for isolated amplifiers for measuring isolated voltages and currents. A fully integrated DC/DC converter with reinforced isolation operating from a 5-V input with configurable 5-V or 5.4-V output (headroom for (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
1-kW, 80 Plus titanium, GaN CCM totem pole bridgeless PFC and half-bridge LLC reference design
TIDA-010062 This reference design is a digitally controlled, compact 1-kW AC/DC power supply design for server power supply unit (PSU) and telecom rectifier applications. The highly efficient design supports two main power stages, including a front-end continuous conduction (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
In-phase current-sense reference design for 230-VAC motor drives using hall-effect current sensors
TIDA-010059 — This reference design features the Hall-effect current sensor, TMCS1100, that can measure currents with an absolute error of < 1% (–40 to 125°C) and provide a working isolation voltage of up to 600 V. The low-resistance in-package current sensing element and lack of need for high-side (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
SOIC (D) 8 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos