Packaging information
| Package | Pins VSSOP (DGS) | 10 |
| Operating temperature range (°C) -55 to 125 |
| Package qty | Carrier 3,000 | LARGE T&R |
Features for the TMP9R01-SP
- QMLP, Radiation Hardness Assured (RHA)
- SMD 5962-17218:
- TID characterized up to 100krad(Si)
- TID RLAT/RHA to 100krad(Si)
- SEL immune to LET= 75MeV×cm2/mg at 125°C
- SEE characterized to LET= 75MeV×cm2/mg
- SEFI characterized to LET= 75MeV×cm2/mg
- QMLV version available: TMP461-SP
- Radiation Tolerant (Space Enhanced Plastic)
- Vendor item drawing (VID) V62/24615
- TID characterized up to 50krad(Si)
- TID RLAT/RHA to 30krad(Si)
- SEL immune to LET= 43MeV×cm2/mg at 125°C
- SEE characterized to LET= 43MeV×cm2/mg
- SEFI characterized to LET= 43MeV×cm2/mg
- Temperature accuracy and range:
- 12-bit resolution: 0.0625°C (LSB)
- Local (on-chip) temp accuracy: ±2.0°C (Max)
- Remote junction temp accuracy: ±1.5°C (Max)
- Remote range tested to: –64°C to 191°C
-
Military temperature range: -55 to 125°C
- Small-size package: VSSOP-10, 4.9mm × 3.0mm
- Integrated calibration/ protection features:
- η-factor and offset correction
- Series resistance cancellation
- Remote BJT/diode fault detection
- Programmable digital filter
- Wide operating range, low power:
- Voltage supply range: 1.7V to 3.6V
- I/O voltages: 1.8V, 2.5V, and 3.3V
- Standby/shutdown IQ: 15µA/3µA
- TMP9R01 Example Driver
Description for the TMP9R01-SP
The TMP9R01-SP (QML Class P) and TMP9R01-SEP (Radiation Tolerant, Space EP) are high-accuracy digital I2C space-grade temperature sensors integrating a 12-bit ADC, bias current sources, and calibration circuitry in a 10-pin VSSOP plastic package. The devices measure remote temperature by forcing a bias current through an external BJT or the integrated diode/junction of an FPGA, ADC, or ASIC, digitizing the resulting ΔVBE and reporting temperature with 0.0625°C resolution. An additional sensor provides on-chip temperature.
The TMP9R01-SP and TMP9R01-SEP incorporate multiple calibration and protection features, including series-resistance cancellation, programmable non-ideality factor (η-Factor), offset correction, and programmable digital filter. Designers can set high- and low-temperature limits that drive the ALERT output for over-and-under temperature thermal protection. Up to 9 pin-selectable I2C/SMBus addresses allow multiple sensors on the same I2C bus. The devices are designed for multi-location spacecraft housekeeping, satellite telemetry, avionics, and other high-reliability applications that require precise, temperature sensing and with varying levels of radiation hardness.
The TMP9R01-SP is also available as a functionally equivalent QMLV-RHA device: TMP461-SP.