C2000™ 32-bit MCU with 400-MIPS, 1x CPU, 1x CLA, FPU, TMU, 1024-KB flash, CLB, EMIF and 16-b ADC ;

TMS320F28379S

ACTIVE

Product details

CPU C28x, CLA Frequency (MHz) 200 Flash memory (KB) 1024 RAM (KB) 164 ADC resolution 12-bit, 16-bit Total processing (MIPS) 400 Features Configurable logic block, FPU32 UART 4 CAN (#) 2 Sigma-delta filter 8 PWM (Ch) 24 TI functional safety category Functional Safety-Compliant
CPU C28x, CLA Frequency (MHz) 200 Flash memory (KB) 1024 RAM (KB) 164 ADC resolution 12-bit, 16-bit Total processing (MIPS) 400 Features Configurable logic block, FPU32 UART 4 CAN (#) 2 Sigma-delta filter 8 PWM (Ch) 24 TI functional safety category Functional Safety-Compliant
HLQFP (PTP) 176 576 mm² 24 x 24 HTQFP (PZP) 100 256 mm² 16 x 16 NFBGA (ZWT) 337 256 mm² 16 x 16
  • TMS320C28x 32-bit CPU
    • 200 MHz
    • IEEE 754 single-precision Floating-Point Unit (FPU)
    • Trigonometric Math Unit (TMU)
    • Viterbi/Complex Math Unit (VCU-II)
  • Programmable Control Law Accelerator (CLA)
    • 200 MHz
    • IEEE 754 single-precision floating-point instructions
    • Executes code independently of main CPU
  • On-chip memory
    • 512KB (256KW) or 1MB (512KW) of flash (ECC-protected)
    • 132KB (66KW) or 164KB (82KW) of RAM (ECC-protected or parity-protected)
    • Dual-zone security supporting third-party development
    • Unique identification number
  • Clock and system control
    • Two internal zero-pin 10-MHz oscillators
    • On-chip crystal oscillator
    • Windowed watchdog timer module
    • Missing clock detection circuitry
  • 1.2-V core, 3.3-V I/O design
  • System peripherals
    • Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support
    • 6-channel Direct Memory Access (DMA) controller
    • Up to 169 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering
    • Expanded Peripheral Interrupt controller (ePIE)
    • Multiple Low-Power Mode (LPM) support with external wakeup
  • Communications peripherals
    • USB 2.0 (MAC + PHY)
    • Support for 12-pin 3.3 V-compatible Universal Parallel Port (uPP) interface
    • Two Controller Area Network (CAN) modules (pin-bootable)
    • Three high-speed (up to 50-MHz) SPI ports (pin-bootable)
    • Two Multichannel Buffered Serial Ports (McBSPs)
    • Four Serial Communications Interfaces (SCI/UART) (pin-bootable)
    • Two I2C interfaces (pin-bootable)
  • Analog subsystem
    • Up to four Analog-to-Digital Converters (ADCs)
      • 16-bit mode
        • 1.1 MSPS each (up to 4.4-MSPS system throughput)
        • Differential inputs
        • Up to 12 external channels
      • 12-bit mode
        • 3.5 MSPS each (up to 14-MSPS system throughput)
        • Single-ended inputs
        • Up to 24 external channels
      • Single Sample-and-Hold (S/H) on each ADC
      • Hardware-integrated post-processing of ADC conversions
        • Saturating offset calibration
        • Error from setpoint calculation
        • High, low, and zero-crossing compare, with interrupt capability
        • Trigger-to-sample delay capture
    • Eight windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
    • Three 12-bit buffered DAC outputs
  • Enhanced control peripherals
    • 24 PWM channels with enhanced features
    • 16 High-Resolution Pulse Width Modulator (HRPWM) channels
      • High resolution on both A and B channels of 8 PWM modules
      • Dead-band support (on both standard and high resolution)
    • Six Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules
    • Eight Sigma-Delta Filter Module (SDFM) input channels, 2 parallel filters per channel
      • Standard SDFM data filtering
      • Comparator filter for fast action for out of range
  • Configurable Logic Block (CLB)
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D; IEC 61508 up to SIL 3; IEC 60730 up to Class C; and UL 1998 up to Class 2
    • Hardware integrity up to ASIL B, SIL 2
  • Safety-related certification
  • Package options:
    • Lead-free, green packaging
    • 337-ball New Fine Pitch Ball Grid Array (nFBGA) [ZWT suffix]
    • 176-pin PowerPAD™ Thermally Enhanced Low-Profile Quad Flatpack (HLQFP) [PTP suffix]
    • 100-pin PowerPAD Thermally Enhanced Thin Quad Flatpack (HTQFP) [PZP suffix]
  • Temperature options:
    • T: –40°C to 105°C junction
    • S: –40°C to 125°C junction
    • Q: –40°C to 125°C free-air (AEC Q100 qualification for automotive applications)
  • TMS320C28x 32-bit CPU
    • 200 MHz
    • IEEE 754 single-precision Floating-Point Unit (FPU)
    • Trigonometric Math Unit (TMU)
    • Viterbi/Complex Math Unit (VCU-II)
  • Programmable Control Law Accelerator (CLA)
    • 200 MHz
    • IEEE 754 single-precision floating-point instructions
    • Executes code independently of main CPU
  • On-chip memory
    • 512KB (256KW) or 1MB (512KW) of flash (ECC-protected)
    • 132KB (66KW) or 164KB (82KW) of RAM (ECC-protected or parity-protected)
    • Dual-zone security supporting third-party development
    • Unique identification number
  • Clock and system control
    • Two internal zero-pin 10-MHz oscillators
    • On-chip crystal oscillator
    • Windowed watchdog timer module
    • Missing clock detection circuitry
  • 1.2-V core, 3.3-V I/O design
  • System peripherals
    • Two External Memory Interfaces (EMIFs) with ASRAM and SDRAM support
    • 6-channel Direct Memory Access (DMA) controller
    • Up to 169 individually programmable, multiplexed General-Purpose Input/Output (GPIO) pins with input filtering
    • Expanded Peripheral Interrupt controller (ePIE)
    • Multiple Low-Power Mode (LPM) support with external wakeup
  • Communications peripherals
    • USB 2.0 (MAC + PHY)
    • Support for 12-pin 3.3 V-compatible Universal Parallel Port (uPP) interface
    • Two Controller Area Network (CAN) modules (pin-bootable)
    • Three high-speed (up to 50-MHz) SPI ports (pin-bootable)
    • Two Multichannel Buffered Serial Ports (McBSPs)
    • Four Serial Communications Interfaces (SCI/UART) (pin-bootable)
    • Two I2C interfaces (pin-bootable)
  • Analog subsystem
    • Up to four Analog-to-Digital Converters (ADCs)
      • 16-bit mode
        • 1.1 MSPS each (up to 4.4-MSPS system throughput)
        • Differential inputs
        • Up to 12 external channels
      • 12-bit mode
        • 3.5 MSPS each (up to 14-MSPS system throughput)
        • Single-ended inputs
        • Up to 24 external channels
      • Single Sample-and-Hold (S/H) on each ADC
      • Hardware-integrated post-processing of ADC conversions
        • Saturating offset calibration
        • Error from setpoint calculation
        • High, low, and zero-crossing compare, with interrupt capability
        • Trigger-to-sample delay capture
    • Eight windowed comparators with 12-bit Digital-to-Analog Converter (DAC) references
    • Three 12-bit buffered DAC outputs
  • Enhanced control peripherals
    • 24 PWM channels with enhanced features
    • 16 High-Resolution Pulse Width Modulator (HRPWM) channels
      • High resolution on both A and B channels of 8 PWM modules
      • Dead-band support (on both standard and high resolution)
    • Six Enhanced Capture (eCAP) modules
    • Three Enhanced Quadrature Encoder Pulse (eQEP) modules
    • Eight Sigma-Delta Filter Module (SDFM) input channels, 2 parallel filters per channel
      • Standard SDFM data filtering
      • Comparator filter for fast action for out of range
  • Configurable Logic Block (CLB)
    • Augments existing peripheral capability
    • Supports position manager solutions
  • Functional Safety-Compliant
    • Developed for functional safety applications
    • Documentation available to aid ISO 26262 system design up to ASIL D; IEC 61508 up to SIL 3; IEC 60730 up to Class C; and UL 1998 up to Class 2
    • Hardware integrity up to ASIL B, SIL 2
  • Safety-related certification
  • Package options:
    • Lead-free, green packaging
    • 337-ball New Fine Pitch Ball Grid Array (nFBGA) [ZWT suffix]
    • 176-pin PowerPAD™ Thermally Enhanced Low-Profile Quad Flatpack (HLQFP) [PTP suffix]
    • 100-pin PowerPAD Thermally Enhanced Thin Quad Flatpack (HTQFP) [PZP suffix]
  • Temperature options:
    • T: –40°C to 105°C junction
    • S: –40°C to 125°C junction
    • Q: –40°C to 125°C free-air (AEC Q100 qualification for automotive applications)

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The TMS320F2837xS is a powerful 32-bit floating-point microcontroller unit (MCU) designed for advanced closed-loop control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; and sensing and signal processing. To accelerate application development, the DigitalPower software development kit (SDK) for C2000 MCUs and the MotorControl software development kit (SDK) for C2000™ MCUs are available.

The real-time control subsystem is based on TI’s 32-bit C28x floating-point CPU, which provides 200 MHz of signal processing performance. The C28x CPU is further boosted by the new TMU accelerator, which enables fast execution of algorithms with trigonometric operations common in transforms and torque loop calculations; and the VCU accelerator, which reduces the time for complex math operations common in encoded applications.

The F2837xS microcontroller family features a CLA real-time control coprocessor. The CLA is an independent 32-bit floating-point processor that runs at the same speed as the main CPU. The CLA responds to peripheral triggers and executes code concurrently with the main C28x CPU. This parallel processing capability can effectively double the computational performance of a real-time control system. By using the CLA to service time-critical functions, the main C28x CPU is free to perform other tasks, such as communications and diagnostics.

The TMS320F2837xS supports up to 1MB (512KW) of onboard flash memory with error correction code (ECC) and up to 164KB (82KW) of SRAM. Two 128-bit secure zones are also available on the CPU for code protection.

Performance analog and control peripherals are also integrated on the F2837xS MCU to further enable system consolidation. Four independent 16-bit ADCs provide precise and efficient management of multiple analog signals, which ultimately boosts system throughput. The new sigma-delta filter module (SDFM) works in conjunction with the sigma-delta modulator to enable isolated current shunt measurements. The Comparator Subsystem (CMPSS) with windowed comparators allows for protection of power stages when current limit conditions are exceeded or not met. Other analog and control peripherals include DACs, PWMs, eCAPs, eQEPs, and other peripherals.

Peripherals such as EMIFs, CAN modules (ISO 11898-1/CAN 2.0B-compliant), and a new uPP interface extend the connectivity of the F2837xS. The uPP interface is a new feature of the C2000™ MCUs and supports high-speed parallel connection to FPGAs or other processors with similar uPP interfaces. Lastly, a USB 2.0 port with MAC and PHY lets users easily add universal serial bus (USB) connectivity to their application.

To learn more about the C2000 MCUs, visit the C2000 Overview at www.ti.com/c2000.

 

C2000™ 32-bit microcontrollers are optimized for processing, sensing, and actuation to improve closed-loop performance in real-time control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; motor control; and sensing and signal processing. The C2000 line includes the Premium performance MCUs and the Entry performance MCUs.

The TMS320F2837xS is a powerful 32-bit floating-point microcontroller unit (MCU) designed for advanced closed-loop control applications such as industrial motor drives; solar inverters and digital power; electrical vehicles and transportation; and sensing and signal processing. To accelerate application development, the DigitalPower software development kit (SDK) for C2000 MCUs and the MotorControl software development kit (SDK) for C2000™ MCUs are available.

The real-time control subsystem is based on TI’s 32-bit C28x floating-point CPU, which provides 200 MHz of signal processing performance. The C28x CPU is further boosted by the new TMU accelerator, which enables fast execution of algorithms with trigonometric operations common in transforms and torque loop calculations; and the VCU accelerator, which reduces the time for complex math operations common in encoded applications.

The F2837xS microcontroller family features a CLA real-time control coprocessor. The CLA is an independent 32-bit floating-point processor that runs at the same speed as the main CPU. The CLA responds to peripheral triggers and executes code concurrently with the main C28x CPU. This parallel processing capability can effectively double the computational performance of a real-time control system. By using the CLA to service time-critical functions, the main C28x CPU is free to perform other tasks, such as communications and diagnostics.

The TMS320F2837xS supports up to 1MB (512KW) of onboard flash memory with error correction code (ECC) and up to 164KB (82KW) of SRAM. Two 128-bit secure zones are also available on the CPU for code protection.

Performance analog and control peripherals are also integrated on the F2837xS MCU to further enable system consolidation. Four independent 16-bit ADCs provide precise and efficient management of multiple analog signals, which ultimately boosts system throughput. The new sigma-delta filter module (SDFM) works in conjunction with the sigma-delta modulator to enable isolated current shunt measurements. The Comparator Subsystem (CMPSS) with windowed comparators allows for protection of power stages when current limit conditions are exceeded or not met. Other analog and control peripherals include DACs, PWMs, eCAPs, eQEPs, and other peripherals.

Peripherals such as EMIFs, CAN modules (ISO 11898-1/CAN 2.0B-compliant), and a new uPP interface extend the connectivity of the F2837xS. The uPP interface is a new feature of the C2000™ MCUs and supports high-speed parallel connection to FPGAs or other processors with similar uPP interfaces. Lastly, a USB 2.0 port with MAC and PHY lets users easily add universal serial bus (USB) connectivity to their application.

To learn more about the C2000 MCUs, visit the C2000 Overview at www.ti.com/c2000.

 

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 115
Type Title Date
* Data sheet TMS320F2837xS Microcontrollers datasheet (Rev. J) 15 Jan 2021
* Errata TMS320F2837xS MCUs Silicon Errata (Rev. I) 25 Jun 2020
* User guide TMS320F2837xS Microcontrollers Technical Reference Manual (Rev. G) 10 Sep 2019
Application note Charge-Sharing Driving Circuits for C2000 ADCs (using PSPICE-FOR-TI) 13 Aug 2021
Application note Methods for Mitigating ADC Memory Cross-Talk 30 Jun 2021
Application note Achieve Delayed Protection for Three-Level Inverter With CLB 28 Jun 2021
User guide C2000 Position Manager PTO Library (Rev. C) 23 May 2021
Application note Programming Examples for the DCAN Module (Rev. A) 20 May 2021
User guide Getting Started With C2000™ Real-Time Control Microcontrollers (MCUs) (Rev. B) 12 May 2021
Application note Leverage New Type ePWM Features for Multiple Phase Control 11 May 2021
Application note C2000™ DCSM Security Tool (Rev. A) 10 May 2021
Application note Sensored Field Oriented Control of 3-Phase Perm Magnet Sync Motors Using F2837x (Rev. A) 07 May 2021
Application note The Essential Guide for Developing With C2000 Real-Time Microcontrollers (Rev. C) 27 Apr 2021
Application note A Demonstration of Optimized Signal Chain Performance of C2000™ Real-Time MCU 09 Apr 2021
White paper TI GaN FET와 C2000™ 실시간 MCU를 결합하여 전력 밀도가 높고 효율적인 전원 시스템 달성 18 Mar 2021
White paper 結合 TI GaN FETs 與 C2000™ 即時 MCU,實現功率密集與有效率的數位電源系統 18 Mar 2021
Application note CRM/ZVS PFC Implementation Based on C2000 Type-4 PWM Module 18 Feb 2021
White paper Achieve Power-Dense and Efficient Digital Power Systems by Combining TI GaN FETs 05 Jan 2021
More literature Maximize density, power, and reliability with TI GaN and C2000™ real-time MCUs 15 Dec 2020
Application note Quick Response Control of PMSM Using Fast Current Loop (Rev. B) 07 Dec 2020
More literature C2000™ SafeTI™ Enablers (Rev. C) 16 Nov 2020
Application note Charge-Sharing Driving Circuits for C2000 ADCs 12 Nov 2020
User guide C2000™ Safety Package for Automotive and Industrial Real-Time Microcontrollers (Rev. C) 03 Nov 2020
Application note Flexible PWMs Enable Multi-Axis Drives, Multi-Level Inverters (Rev. B) 29 Oct 2020
Application note Serial Flash Programming of C2000 Microcontrollers (Rev. D) 27 Oct 2020
Application note C2000™ Unique Device Number (Rev. B) 17 Sep 2020
Application note ADC Input Circuit Evaluation for C2000 MCUs 30 Jul 2020
Application note 如何使用 C2000 CLB 实现 Traction Inverter 应用中的 PWM 输出保护功能 27 Jul 2020
Application note EEPROM Emulation for Gen 2 C2000 Real-Time MCUs (Rev. A) 23 Jul 2020
Application note How to Migrate Custom Logic From an FPGA/CPLD to C2000 Microcontrollers (Rev. A) 15 Jun 2020
White paper Streamlining Functional Safety Certification in Automotive and Industrial 09 Jun 2020
White paper 簡化汽車及工業領域的功 能安全認證 09 Jun 2020
White paper 자동차 및 산업 분야의 기능적 안전성 인증 간소화 09 Jun 2020
User guide SYS/BIOS (TI-RTOS Kernel) User's Guide (Rev. V) 01 Jun 2020
User guide C2000 Real-Time Control Peripheral Reference Guide (Rev. N) 19 May 2020
Application note Software Examples to Showcase Unique Capabilities of TI’s C2000™ CLA 17 Apr 2020
Application note Enhancing the Computational Performance of the C2000™ Microcontroller Famil (Rev. B) 31 Mar 2020
User guide C2000Ware DigitalPower SDK Getting Started Guide (Rev. B) 20 Mar 2020
Application note CRC Engines in C2000 Devices 31 Jan 2020
Application note Configurable Error Generator for Controller Area Network 19 Dec 2019
Application note Migration Between TMS320F2837x and TMS320F2838x 05 Dec 2019
White paper Simplify the integration of position sensors for industrial drive control system (Rev. A) 21 Nov 2019
User guide TMS320C28x Extended Instruction Sets Technical Reference Manual (Rev. C) 29 Oct 2019
Application note Dual-Axis Motor Control Using FCL and SFRA On a Single C2000™ MCU 07 Aug 2019
Application note Development Tool Versions for C2000 Support 19 Jul 2019
User guide C2000™ Software Frequency Response Analyzer (SFRA) Library User’s Guide (Rev. A) 26 Jun 2019
Functional safety information Certification for SafeTI Functional Safety Hardware Process (Rev. A) 07 Jun 2019
User guide Fast Current Loop Driverlib Library User’s Guide 30 May 2019
Application note Calculating Useful Lifetimes of Embedded Processors (Rev. B) 07 May 2019
Certificate Report on certificate of the Safety MCU by TUV SUD 07 May 2019
Certificate TUV SUD product service certificate 1 C2000 07 May 2019
Technical article Motor control software development kit jump-starts new designs 17 Apr 2019
White paper C2000™ MCU SafeTI™ control solutions: An introduction to ASIL decomposition 10 Apr 2019
User guide DesignDRIVE IDDK Hardware Reference Guide 10 Apr 2019
User guide DesignDRIVE IDDK User Guide 10 Apr 2019
User guide TMS320F2837xD, TMS320F2837xS, and TMS320F2807xsafety manual user's guide (Rev. C) 27 Mar 2019
User guide C2000Ware motor control SDK getting started guide 20 Mar 2019
User guide LAUNCHXL-F28377S overview (Rev. D) 20 Mar 2019
Application note Designing With The C2000 Configurable Logic Block 05 Feb 2019
White paper Addressing Systematic and Random hardware faults using C2000 SafeTI Products (Rev. A) 31 Jan 2019
User guide TMS320F2837xS Delfino Microcontrollers Technical Reference Manual (Rev. F) 15 Jan 2019
Application note MSL Ratings and Reflow Profiles (Rev. A) 13 Dec 2018
Application note Updating Firmware on Security Enabled TMS320F2837xx or TMS320F2807x Devices 04 Dec 2018
Application note CW/CCW Support on the C2000 eQEP Module (Rev. A) 24 Oct 2018
Application note Interfacing the C2000 with an AFE03x: B-FSK Example (Rev. C) 24 Sep 2018
White paper Breakthrough technologies lead the solar power industry into the future 27 Jul 2018
White paper Exploring the evolution and optimization of wireless power transfer 27 Jul 2018
White paper Functional Safety: A tunable FMEDA for C2000™ MCUs 27 Jul 2018
More literature C2000™ Safety Mechanisms 17 Jul 2018
Technical article A cost-effective option to get started with integrated position sensing 11 Jul 2018
Application note PowerPAD™ Thermally Enhanced Package (Rev. H) 06 Jul 2018
White paper Maximizing power for Level 3 EV charging stations 12 Jun 2018
White paper Achieving Coexistence of Safety Functions for EV/HEV Using C2000 MCUs 21 May 2018
Application note C2000 MCU JTAG Connectivity Debug 11 May 2018
Application note Design and Usage Guidelines for the C2000 External Memory Interface (EMIF) (Rev. A) 23 Mar 2018
Application note Dual Motor Ctl Using FCL and Perf Analysis Using SFRA on TMS320F28379D LaunchPad (Rev. A) 20 Mar 2018
User guide Fast Current Loop (C28x) Library 06 Mar 2018
Application note Performance Analysis of Fast Current Loop (FCL) in Servo 06 Mar 2018
Application note Programming TMS320x28xx and 28xxx Peripherals in C/C++ (Rev. E) 19 Dec 2017
Application note C2000 CPU Memory Built-In Self-Test 27 Nov 2017
Application note C2000™ Hardware Built-In Self-Test 26 Oct 2017
User guide TMS320F2837xS Flash API Reference Guide (Rev. A) 18 Aug 2017
User guide TMS320F2837xS Delfino Microcontrollers Technical Reference Manual (Rev. E) 15 Aug 2017
User guide TMS320F2837xS Flash API Reference Guide 18 May 2017
Application note Fast Current Loop Library 08 May 2017
Application note High Bandwidth Current Control of 3-Phase PMSM Using F2837x FCL Library 08 May 2017
User guide C2000 Position Manager T-Format Library Module User's Guide 26 Sep 2016
White paper Designing the Next Generation of Industrial Drive and Control Systems (Rev. A) 12 Sep 2016
Application note Semiconductor and IC Package Thermal Metrics (Rev. C) 19 Apr 2016
Technical article Industrial drive control architectures: Part 3 12 Apr 2016
Application note Calculator for CAN Bit Timing Parameters 22 Mar 2016
Application note The TMS320F2837xD Architecture: Achieving a New Level of High Performance 11 Feb 2016
User guide Using Position Manager SinCos Library on IDDK User's Guide 19 Jan 2016
User guide C2000 Position Manager SinCos Library User's Guide 07 Jan 2016
Technical article Don’t miss out: New product demos featured at SPS IPC Drives 2015 18 Dec 2015
User guide DesignDRIVE Development Kit IDDK v2.2.1 - Hardware Reference Guide 09 Nov 2015
User guide DesignDRIVE Development Kit IDDK v2.2.1 - User’s Guide 09 Nov 2015
User guide C2000 Position Manager BISS-C Library User's Guide 05 Nov 2015
User guide C2000 Position Manager EnDat22 Library Module User's Guide 05 Nov 2015
User guide Using Position Manager BiSS-C Library on IDDK User's Guide 05 Nov 2015
User guide Using Position Manager EnDat22 Library on IDDK HW User's Guide 05 Nov 2015
User guide TMS320F2837xS Delfino Microcontrollers Technical Reference Manual (Rev. C) 25 Sep 2015
More literature TMS320F28377S LaunchPad Quick Start Guide 28 May 2015
User guide TMS320C28x DSP CPU and Instruction Set (Rev. F) 10 Apr 2015
Application note Accessing External SDRAM on the TMS320F2837x/2807x Microcontrollers Using C/C++ 30 Mar 2015
Application note Calculating FIT for a Mission Profile 24 Mar 2015
White paper Resolver-to-digital conversion implementation (Rev. A) 26 Mar 2014
Application note Running an Application from Internal Flash Memory on the TMS320F28xxx DSP (Rev. L) 28 Feb 2013
Application note TMS320C28x FPU Primer (Rev. A) 20 Jul 2009
Application note Common Object File Format (COFF) 15 Apr 2009
Application note Using PWM Output as a Digital-to-Analog Converter on a TMS320F280x (Rev. A) 09 Sep 2008
Application note Flash Programming Solutions for the TMS320F28xxx DSCs 19 Aug 2008
Application note Using Enhanced Pulse Width Modulator (ePWM) Module for 0-100% Duty Cycle Control 20 Dec 2006
Application note Using the eQEP Module in TMS320x280x as a Dedicated Capture 30 Nov 2006
Application note Online Stack Overflow Detection on the TMS320C28x DSP 02 May 2003

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TIEVM-VIENNARECT — Vienna rectifier-based three-phase power factor correction evaluation module using C2000™ MCUs

The Vienna rectifier power topology is used in high power three phase power factor (AC-DC) applications such as off-board electric vehicle (EV) chargers and telecom rectifiers. This design illustrates how to control the power stage using C2000™ MCUs. This design uses an HSEC180 controlCARD (...)
In stock
Limit: 1
Daughter card

BOOSTXL-3PHGANINV — 48-V Three-Phase Inverter With Shunt-Based In-Line Motor Phase Current Sensing Evaluation Module

The BOOSTXL-3PHGANINV evaluation module features a 48-V/10-A three-phase GaN inverter with precision in-line shunt-based phase current sensing for accurate control of precision drives such as servo drives.

MathWorks MATLAB & Simulink example models include the following:

In stock
Limit: 3
Daughter card

BOOSTXL-POSMGR — C2000 DesignDRIVE position manager BoosterPack™ plug-in module

The PositionManager BoosterPack is a flexible low voltage platform intended for evaluating interfaces to absolute encoders and analog sensors like resolvers and SinCos transducers.  When combined with the DesignDRIVE Position Manager software solutions this low-cost evaluation module becomes a (...)
In stock
Limit: 2
Daughter card

TMDSCNCD28379D — F28379D controlCARD for C2000 Real time control development kits

TMDSCNCD28379D is an HSEC180 controlCARD based evaluation and development tool for the F2837xD,  F2837xS, and F2807x series in the TI MCU. controlCARDs are ideal to use for initial evaluation and system prototyping. controlCARDs are complete board-level modules that utilize one of two standard (...)

In stock
Limit: 1
Daughter card

TMDSHSECDOCK — HSEC180 controlCARD Baseboard Docking Station

TMDSHSECDOCK is a baseboard that provides header pin access to key signals on compatible HSEC180-based controlCARDs.  A breadboard area is available for rapid prototyping.  Board power can be provided by the provided USB cable or a 5V barrel supply.

In stock
Limit: 2
Debug probe

TMDSEMU110-U — XDS110 JTAG Debug Probe

The Texas Instruments XDS110 is a new class of debug probe (emulator) for TI embedded processors. The XDS110 replaces the XDS100 family while supporting a wider variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a single pod. Also, all XDS debug probes support Core and System Trace in all ARM and (...)

Out of stock on TI.com
Debug probe

TMDSEMU200-U — XDS200 USB Debug Probe

The XDS200 is a debug probe (emulator) used for debugging TI embedded devices.  The XDS200 features a balance of low cost with good performance as compared to the low cost XDS110 and the high performance XDS560v2.  It supports a wide variety of standards (IEEE1149.1, IEEE1149.7, SWD) in a (...)

In stock
Limit: 3
Debug probe

TMDSEMU560V2STM-U — XDS560v2 System Trace USB Debug Probe

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7).  Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

In stock
Limit: 1
Debug probe

TMDSEMU560V2STM-UE — XDS560v2 System Trace USB & Ethernet Debug Probe

The XDS560v2 is the highest performance of the XDS family of debug probes and supports both the traditional JTAG standard (IEEE1149.1) and cJTAG (IEEE1149.7). Note that it does not support serial wire debug (SWD).

All XDS debug probes support Core and System Trace in all ARM and DSP processors that (...)

In stock
Limit: 1
Development kit

LAUNCHXL-F28379D — C2000 Delfino MCU F28379D LaunchPad™ development kit

LAUNCHXL-F28379D is a low-cost evaluation and development tool for the TMS320F2837xDTMS320F2837xS, and TMS320F2807x products in the TI MCU LaunchPad™ development kit ecosystem which is compatible with various plug-on BoosterPacks (suggested under the recommended BoosterPack™ Plug-in (...)

Development kit

TIEVM-HV-1PH-DCAC — Single phase inverter development kit with voltage source and grid connected modes

This reference design implements single phase inverter (DC-AC) control using the C2000™ F2837xD and F28004x microcontrollers. Design supports two modes of operation for the inverter. First is voltage source mode using an output LC filter, this control mode is typically used in Uninterrupted (...)
In stock
Limit: 1
Development kit

TMDSDOCK28379D — F28379D Delfino Experimenter Kit

TMDSDOCK28379D is a HSEC180 controlCARD based evaluation and development tool for the C2000™ Delfino™ F2837x and Piccolo F2807x series of microcontroller products. The Docking Station provides power to the controlCARD and has a bread-board area for prototyping. Access to the key device (...)

In stock
Limit: 1
Development kit

TMDXIDDK379D — C2000 DesignDRIVE Development Kit for Industrial Motor Control

The DesignDRIVE Development Kit (IDDK) hardware offers an integrated servo drive design with full power stage to drive a high voltage three-phase motor and eases the evaluation of a range of position feedback, current sensing and control topologies.

The sensing peripherals on the C2000™ MCU (...)
Hardware programming tool

C2000-GANG — C2000 Gang Programmer

From Elprotronics, Inc. - The C2000 Gang Programmer is a C2000 device programmer that can program up to eight identical C2000 devices at the same time. The C2000 Gang Programmer connects to a host PC using a standard RS-232 or USB connection and provides flexible programming options that allow the (...)

Software development kit (SDK)

C2000WARE — C2000Ware for C2000 MCUs

C2000Ware is a cohesive set of software and documentation created to minimize development time. It includes device-specific drivers, libraries, and peripheral examples.
  • Hardware design schematics, BOM, gerber files, and documentation for C2000 controlCARDS, Experimenter Kits, and LaunchPads.
  • (...)
Software development kit (SDK)

C2000WARE-DIGITALPOWER-SDK — DigitalPower software development kit (SDK) for C2000™ MCUs

    • DigitalPower SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based digital power system development time targeted for various AC-DC, DC-DC and DC-AC power supply applications. The software includes (...)
Software development kit (SDK)

C2000WARE-MOTORCONTROL-SDK — MotorControl software development kit (SDK) for C2000™ MCUs

  • MotorControl SDK for C2000™ microcontrollers (MCU) is a cohesive set of software infrastructure, tools, and documentation designed to minimize C2000 MCU based motor control system development time targeted for various three-phase motor control applications. The software includes firmware that (...)
Driver or library

C2000-SAFETI-DIAGNOSTICS-LIB — C2000 SafeTI™ Diagnostic Software Library

C2000 SafeTI diagnostic library advantage

The C2000 MCU Diagnostic Software package includes SafeTI™ software that helps make designing for functional safety applications with TI C2000™ real-time control microcontrollers (MCUs) easier and faster. The safety mechanisms employed are (...)

IDE, configuration, compiler or debugger

C2000-CGT — C2000 code generation tools - compiler

The TI C2000 C/C++ Compiler and Assembly Language Tools support development of applications for TI C2000 Microcontroller platforms, including the Concerto (F28M3xx), Piccolo (280xx), Delfino Floating-Point (283xx), and C2000 Fixed-Point (2823x/280x/281x) Microcontroller devices.

Code Composer Studio (...)
IDE, configuration, compiler or debugger

CCSTUDIO-C2000 — Code Composer Studio (CCS) Integrated Development Environment (IDE) for C2000 Microcontrollers

Code Composer Studio is an integrated development environment (IDE) that supports TI's Microcontroller and Embedded Processors portfolio. Code Composer Studio comprises a suite of tools used to develop and debug embedded applications. It includes an optimizing C/C++ compiler, source code editor (...)

IDE, configuration, compiler or debugger

SAFETI_CQKIT — Safety compiler qualification kit

The Safety Compiler Qualification Kit was developed to assist customers in qualifying their use of the TI ARM, C6000, C7000 or C2000/CLA C/C++ Compiler to functional safety standards such as IEC 61508 and ISO 26262.

The Safety Compiler Qualification Kit:

  • is free of charge for TI customers
  • does not (...)
Software programming tool

UNIFLASH — UniFlash stand-alone flash tool for microcontrollers, Sitara™; processors and SimpleLink™

Supported devices: CC13xx, CC25xx, CC26xx, CC3x20, CC3x30, CC3x35, Tiva, C2000, MSP43x, Hercules, PGA9xx, IWR12xx, IWR14xx, IWR16xx, IWR18xx , IWR68xx, AWR12xx, AWR14xx, AWR16xx, AWR18xx.  Command line only: AM335x, AM437x, AM571x, AM572x, AM574x, AM65XX, K2G

CCS Uniflash is a standalone tool used to (...)

Support software

MATHW-3P-SLEC — MathWorks MATLAB, Simulink and Embedded Coder

Embedded Coder Hardware Support Package for TI C2000™: Save design time and get into production faster with C2000 MCU’s using MathWorks software tools.

MATLAB Coder™, Simulink Coder™, and Embedded Coder® generate ANSI/ISO C/C++ code that can be compiled and executed on Texas (...)

From: MathWorks, Inc.
Simulation model

TMS320F2837xD ZWT IBIS Model (Rev. A)

SPRM637A.ZIP (441 KB) - IBIS Model
Simulation model

TMS320F2837xD PTP IBIS Model (Rev. A)

SPRM638A.ZIP (438 KB) - IBIS Model
Simulation model

TMS320F2837xS ZWT IBIS Model (Rev. A)

SPRM639A.ZIP (441 KB) - IBIS Model
Simulation model

TMS320F2837xS PTP IBIS Model (Rev. A)

SPRM640A.ZIP (438 KB) - IBIS Model
Simulation model

TMS320F2837xS PZP IBIS Model (Rev. A)

SPRM641A.ZIP (260 KB) - IBIS Model
Simulation model

TMS320F2837xD ZWT BSDL Model (Rev. A)

SPRM644A.ZIP (5 KB) - BSDL Model
Simulation model

TMS320F2837xD PTP BSDL Model (Rev. A)

SPRM645A.ZIP (4 KB) - BSDL Model
Simulation model

TMS320F2837xS ZWT BSDL Model (Rev. A)

SPRM646A.ZIP (5 KB) - BSDL Model
Simulation model

TMS320F2837xS PTP BSDL Model (Rev. A)

SPRM647A.ZIP (4 KB) - BSDL Model
Simulation model

TMS320F2837xD PZP BSDL Model (Rev. A)

SPRM677A.ZIP (3 KB) - BSDL Model
Simulation model

TMS320F2837xS PZP BSDL Model (Rev. A)

SPRM678A.ZIP (3 KB) - BSDL Model
Design tool

C2000-3P-SEARCH — C2000 Third-party search tool

TI has partnered with multiple companies to offer a wide range of solutions and services for TI C2000 devices. These companies can accelerate your path to production using C2000 devices. Download this search tool to quickly browse third-party details and find the right third-party to meet your (...)
Many TI reference designs include the TMS320F28379S

Use our reference design selection tool to review and identify designs that best match your application and parameters.

Package Pins Download
HLQFP (PTP) 176 View options
HTQFP (PZP) 100 View options
NFBGA (ZWT) 337 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos