TMUX7308F

Name: TMUX7308F
Brand: TI
SKU: TMUX7308F
Price: 2.98 USD

ACTIVE

±60-V fault-protected, 8:1, one-channel multiplexers with 1.8-V logic

Order now

Data sheet

document-pdfAcrobat TMUX730xF ±60-V Fault-Protected, 8:1 and Dual 4:1 Multiplexers with Latch-Up Immunity and 1.8-V Logic datasheet (Rev. C) PDF | HTML

TMUX7308F

ACTIVE

Data sheet

Order now

Product details

Configuration

8:1

Number of channels

1

Power supply voltage - single (V)

12, 16, 20, 36, 44

Power supply voltage - dual (V)

+/-10, +/-15, +/-18, +/-22, +/-5

Protocols

Analog

Ron (typ) (Ω)

250

CON (typ) (pF)

40

ON-state leakage current (max) (µA)

0.025

Supply current (typ) (µA)

250

Bandwidth (MHz)

80

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Break-before-make, Fail-safe logic, Overvoltage protection, Powered-off protection

Input/output continuous current (max) (mA)

5

Rating

Catalog

Drain supply voltage (max) (V)

44

Supply voltage (max) (V)

44

Negative rail supply voltage (max) (V)

-44

Configuration

8:1

Number of channels

1

Power supply voltage - single (V)

12, 16, 20, 36, 44

Power supply voltage - dual (V)

+/-10, +/-15, +/-18, +/-22, +/-5

Protocols

Analog

Ron (typ) (Ω)

250

CON (typ) (pF)

40

ON-state leakage current (max) (µA)

0.025

Supply current (typ) (µA)

250

Bandwidth (MHz)

80

Operating temperature range (°C)

-40 to 125

Features

1.8-V compatible control inputs, Break-before-make, Fail-safe logic, Overvoltage protection, Powered-off protection

Input/output continuous current (max) (mA)

5

Rating

Catalog

Drain supply voltage (max) (V)

44

Supply voltage (max) (V)

44

Negative rail supply voltage (max) (V)

-44

TSSOP (PW)

16

32 mm² 5 x 6.4

WQFN (RRP)

16

16 mm² 4 x 4

Wide supply range:
- Dual supply: ±5 V to ±22 V
- Single supply: 8 V to 44 V
Integrated fault protection:
- Overvoltage protection, source to supplies or source to drain: ±85 V
- Overvoltage protection: ±60 V
- Powered-off protection: ±60 V
- Non-fault channels continue to operate
- Known state without logic inputs present
- Output clamped to the supply in overvoltage condition
Latch-up immune
1.8-V Logic capable
Fail-safe logic: up to 44 V independent of supply
Integrated pull-down resistor on logic pins
Break-before-make switching
Industry standard TSSOP and smaller WQFN packages

Wide supply range:
- Dual supply: ±5 V to ±22 V
- Single supply: 8 V to 44 V
Integrated fault protection:
- Overvoltage protection, source to supplies or source to drain: ±85 V
- Overvoltage protection: ±60 V
- Powered-off protection: ±60 V
- Non-fault channels continue to operate
- Known state without logic inputs present
- Output clamped to the supply in overvoltage condition
Latch-up immune
1.8-V Logic capable
Fail-safe logic: up to 44 V independent of supply
Integrated pull-down resistor on logic pins
Break-before-make switching
Industry standard TSSOP and smaller WQFN packages

The TMUX7308F and TMUX7309F are modern complementary metal-oxide semiconductor (CMOS) analog multiplexers in 8:1 (single ended) and 4:1 (differential) configurations. The devices work well with dual supplies (±5 V to ±22 V), a single supply (8 V to 44 V), or asymmetric supplies (such as V DD = 12 V, V SS = –5 V). The overvoltage protection is available in powered and powered-off conditions, making the TMUX7308F and TMUX7309F devices suitable for applications where power supply sequencing cannot be precisely controlled.

The device blocks fault voltage up to +60 V or –60 V relative to ground in both powered and powered-off conditions. When no power supplies are present, the switch channels remain in the OFF state regardless of switch input conditions and logic control status. Under normal operation conditions, if the analog input signal level on any Sx pin exceeds the supply voltage (V DD or V SS) by a threshold voltage (V T), the channel turns OFF and the Sx pin becomes high impedance. When the fault channel is selected, the drain pin (D or Dx) is pulled to the supply (V DD or V SS) that was exceeded.

The low capacitance, low charge injection, and integrated fault protection enables the TMUX7308F and TMUX7309F devices to be used in front end data acquisition applications where high performance and high robustness are both critical. The devices are available in a standard TSSOP package and smaller WQFN package (ideal if PCB space is limited).

The TMUX7308F and TMUX7309F are modern complementary metal-oxide semiconductor (CMOS) analog multiplexers in 8:1 (single ended) and 4:1 (differential) configurations. The devices work well with dual supplies (±5 V to ±22 V), a single supply (8 V to 44 V), or asymmetric supplies (such as V DD = 12 V, V SS = –5 V). The overvoltage protection is available in powered and powered-off conditions, making the TMUX7308F and TMUX7309F devices suitable for applications where power supply sequencing cannot be precisely controlled.

The device blocks fault voltage up to +60 V or –60 V relative to ground in both powered and powered-off conditions. When no power supplies are present, the switch channels remain in the OFF state regardless of switch input conditions and logic control status. Under normal operation conditions, if the analog input signal level on any Sx pin exceeds the supply voltage (V DD or V SS) by a threshold voltage (V T), the channel turns OFF and the Sx pin becomes high impedance. When the fault channel is selected, the drain pin (D or Dx) is pulled to the supply (V DD or V SS) that was exceeded.

The low capacitance, low charge injection, and integrated fault protection enables the TMUX7308F and TMUX7309F devices to be used in front end data acquisition applications where high performance and high robustness are both critical. The devices are available in a standard TSSOP package and smaller WQFN package (ideal if PCB space is limited).

open-in-new

Find other Analog switches & muxes

Download View video with transcript Video

Technical documentation

star

=Top documentation for this product selected by TI

No results found. Please clear your search and try again.

View all 7

	Type	Title		Date
*	Data sheet	TMUX730xF ±60-V Fault-Protected, 8:1 and Dual 4:1 Multiplexers with Latch-Up Immunity and 1.8-V Logic datasheet (Rev. C)	PDF \| HTML	12 Jul 2023
	Application note	Protecting and Maintaining Signal Integrity in PLC Systems	PDF \| HTML	22 Dec 2024
	Application note	How to Handle High Voltage Common Mode Applications using Multiplexers	PDF \| HTML	03 Oct 2022
	Application brief	Replace Discrete Protection and Optimize Your PLC System Protection	PDF \| HTML	03 Jan 2022
	Application note	Protection Against Overvoltage Events, Miswiring, and Common Mode Voltages	PDF \| HTML	07 Oct 2021
	Application note	Improving Analog Input Modules Reliability Using Fault Protected Multiplexers	PDF \| HTML	28 Sep 2021
	Application note	Using Latch Up Immune Multiplexers to Help Improve System Reliability (Rev. A)		20 Sep 2021

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Interface adapter

LEADED-ADAPTER1 — Surface mount to DIP header adapter for quick testing of TI's 5, 8, 10, 16 & 24-pin leaded packages

The EVM-LEADED1 board allows for quick testing and bread boarding of TI's common leaded packages. The board has footprints to convert TI's D, DBQ, DCT,DCU, DDF, DGS, DGV, and PW surface mount packages to 100mil DIP headers.

User guide: PDF

Not available on TI.com

Interface adapter

LEADLESS-ADAPTER1 — Surface mount to DIP header adapter for testing of TI's 6,8,10,12,14,16, & 20-pin leadless packages

The EVM-LEADLESS1 board allows for quick testing and bread boarding of TI's common leadless packages. The board has footprints to convert TI's DRC, DTP, DQE, RBW, RGY, RSE, RSV, RSW RTE, RTJ, RUK , RUC, RUG, RUM,RUT and YZP surface mount packages to 100mil DIP headers.

User guide: PDF