Top

Product details

Parameters

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (Max) Mono Power stage supply (Max) (V) 5.2 Power stage supply (Min) (V) 2.3 Load (Min) (ohms) 8 Output power (W) 2 SNR (dB) 95 THD + N @ 1 kHz (%) 0.07 Iq (Typ) (mA) 1.7 Control interface GPIO Closed/open loop Closed Analog supply (Min) (V) 2.3 Analog supply (Max) (V) 5.2 PSRR (dB) 85 Operating temperature range (C) -40 to 85 open-in-new Find other Speaker amps

Package | Pins | Size

DSBGA (YZH) 16 0 mm² 1.994 x 1.994 open-in-new Find other Speaker amps

Features

  • Built-In SpeakerGuardTM Automatic Gain Control (AGC) with Enhanced Battery Tracking
    • Limits Battery Current Consumption
    • Prevents Audio Clipping
  • 2 W into 8 Ω Load From 3.6 V Supply (6% THD)
  • Integrated Adaptive Boost Converter
    • Increases Efficiency at Low Quiescent Current of 1.7 mA from 3.6 V
  • Operates From 2.5 V to 5.2 V
  • Thermal and Short-Circuit Protection with Auto Recovery
  • Three Gain Settings: 6 dB, 15.5 dB, and 20 dB
  • Independent Control for Boost and Class-D
  • Pin-to-Pin Compatible with TPA2013D1
  • Available in 1.954 mm × 1.954 mm 16-ball DSBGA Package

All other trademarks are the property of their respective owners

  • APPLICATIONS
    • Cell Phones, PDA, GPS
    • Portable Electronics and Speakers
  • open-in-new Find other Speaker amps

    Description

    The TPA2015D1 is a high efficiency Class-D audio power amplifier with battery-tracking SpeakerGuard AGC technology and an integrated adaptive boost converter that enhances efficiency at low output power. It drives up to 2 W into an 8 Ω speaker (6% THD). With 85% typical efficiency, the TPA2015D1 helps extend battery life when playing audio.

    The built-in boost converter generates a 5.5 V supply voltage for the Class-D amplifier. This provides a louder audio output than a stand-alone amplifier directly connected to the battery. The SpeakerGuardTM AGC adjusts the Class-D gain to limit battery current and prevent heavy clipping.

    The TPA2015D1 has an integrated low-pass filter to improve the RF rejection and reduce DAC out-of-band noise, increasing the signal to noise ratio (SNR).

    The TPA2015D1 is available in a space saving 1.954 mm × 1.954 mm, 0.5 mm pitch DSBGA package (YZH).

    open-in-new Find other Speaker amps
    Download

    Technical documentation

    = Top documentation for this product selected by TI
    No results found. Please clear your search and try again. View all 5
    Type Title Date
    * Datasheet TPA2015D1 2-W Constant Output Power Class-D Audio Amplifier With Adaptive Boost Converter and Battery Tracking Speakerguard™ AGC datasheet (Rev. B) Oct. 30, 2015
    Application note Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) Aug. 26, 2019
    Application note AN-1849 An Audio Amplifier Power Supply Design (Rev. C) Jun. 27, 2019
    Application note AN-1737 Managing EMI in Class D Audio Applications (Rev. A) May 01, 2013
    User guide TPA2015D1EVM - User Guide May 01, 2010

    Design & development

    For additional terms or required resources, click any title below to view the detail page where available.

    Hardware development

    EVALUATION BOARD Download
    99
    Description

    The TPA2015D1 is a mono 2.0-W Class-D audio amplifier with an integrated boost converter. The evaluation module comprises a TPA2015D1, a small number of external components, and input and output connectors to simplify interface to an audio source and speaker. The EVM features jumpers to easily (...)

    Features
    • High Efficiency Integrated Boost Converter
    • 2.0 W into 8Ω at 3.6 V (6% THD)
    • Constant output power of 2.0 W (3.6-5.0 V)
    • 2.3 V to 5.2 V supply voltage
    • Battery Tracking AGC
    • Battery Tracking SpeakerGuard™
    • Very High PSRR – 90 dB
    • High efficiency (81%) (@1 W and 3.6 V)
    • Ultra-low quiescent current (1.7 mA)
    • Integrated (...)

    Design tools & simulation

    SIMULATION MODEL Download
    SLOM181.ZIP (2 KB) - PSpice Model
    SIMULATION MODEL Download
    SLOM182.ZIP (75 KB) - TINA-TI Spice Model
    SIMULATION MODEL Download
    SLOM183.TSC (14138 KB) - TINA-TI Reference Design
    SIMULATION TOOL Download
    PSpice® for TI design and simulation tool
    PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
    Features
    • Leverages Cadence PSpice Technology
    • Preinstalled library with a suite of digital models to enable worst-case timing analysis
    • Dynamic updates ensure you have access to most current device models
    • Optimized for simulation speed without loss of accuracy
    • Supports simultaneous analysis of multiple products
    • (...)

    CAD/CAE symbols

    Package Pins Download
    DSBGA (YZH) 16 View options

    Ordering & quality

    Information included:
    • RoHS
    • REACH
    • Device marking
    • Lead finish/Ball material
    • MSL rating/Peak reflow
    • MTBF/FIT estimates
    • Material content
    • Qualification summary
    • Ongoing reliability monitoring

    Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

    Support & training

    TI E2E™ forums with technical support from TI engineers

    Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

    If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

    Videos

    Related videos