TPA2025D1

ACTIVE

2-W, mono, analog input Class-D audio amp with integrated boost, fixed gain & auto. gain control

Top

Product details

Parameters

Audio input type Analog Input Architecture Class-D Boosted Speaker channels (Max) Mono Power stage supply (Max) (V) 5.5 Power stage supply (Min) (V) 2.5 Load (Min) (ohms) 4 Output power (W) 1.7 SNR (dB) 97 THD + N @ 1 kHz (%) 0.07 Iq (Typ) (mA) 2 Control interface GPIO Closed/open loop Closed Analog supply (Min) (V) 2.5 Analog supply (Max) (V) 5.5 PSRR (dB) 90 Operating temperature range (C) -40 to 85 open-in-new Find other Speaker amps

Package | Pins | Size

DSBGA (YZG) 12 0 mm² 1.57 x 2.022 open-in-new Find other Speaker amps

Features

  • Built-In Enhanced Battery Tracking Automatic
    Gain Control (AGC)
    • Limits Battery Current Consumption
  • 1.9 W into 8-Ω Load from 3.6-V Supply
    (1% THD+N)
  • Integrated Adaptive Boost Converter
    • Increases Efficiency at Low Output
      Power
  • Low Quiescent Current of 2 mA From 3.6 V
  • Thermal and Short-Circuit Protection With
    Auto Recovery
  • 20-dB Fixed Gain
  • Similar Performance to TPA2015D1
  • Available in 1.53-mm × 1.982-mm,
    0.5-mm Pitch 12-Ball WCSP Package
open-in-new Find other Speaker amps

Description

The TPA2025D1 is a high efficiency Class-D audio power amplifier with battery tracking AGC technology and an integrated Class-G boost converter that enhances efficiency at low output power. It drives up to 1.9 W into an 8-Ω speaker (1% THD+N). With 85% typical efficiency, the TPA2025D1 helps extend battery life when playing audio.

The built-in boost converter generates a 5.75-V supply voltage for the Class-D amplifier. This provides a louder audio output than a stand-alone amplifier directly connected to the battery. The battery tracking AGC adjusts the Class-D gain to limit battery current at lower battery voltage.

The TPA2025D1 has an integrated low-pass filter to improve the RF rejection and reduce DAC out-of-band noise, increasing the signal-to-noise ratio (SNR).

The TPA2025D1 is available in a space saving 1.53 mm × 1.982 mm, 0.5 mm pitch DSBGA package (YZG).

open-in-new Find other Speaker amps
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Datasheet TPA2025D1 2-W Constant Output Power Class-D Audio Amplifier With Class-G Boost Converter and Battery Tracking AGC datasheet (Rev. B) Dec. 29, 2014
Application note Guidelines for Measuring Audio Power Amplifier Performance (Rev. A) Aug. 26, 2019
Application note AN-1849 An Audio Amplifier Power Supply Design (Rev. C) Jun. 27, 2019
Application note AN-1737 Managing EMI in Class D Audio Applications (Rev. A) May 01, 2013
User guide TPA2025D1 Audio Power Amplifier Evaluation Module Sep. 22, 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
TPA2025D1EVM
TPA2025D1EVM
document-generic User guide
149
Description

The TPA2025D1 is a mono 2.0-W Class-D audio amplifier with an integrated boost converter. The evaluation module comprises a TPA2025D1, a small number of external components, and input and output connectors to simplify interface to an audio source and speaker. The EVM features jumpers to easily (...)

Features
  • High Efficiency Integrated Boost Converter
  • 2.0 W into 8Ω at 3.6 V (6% THD)
  • Constant output power of 2.0 W (3.6-5.0 V)
  • 2.3 V to 5.2 V supply voltage
  • Battery Tracking AGC
  • Battery Tracking SpeakerGuard™
  • Very High PSRR – 90 dB
  • High efficiency (81%) (@1 W and 3.6 V)
  • Ultra-low quiescent current (1.7 mA)
  • Integrated (...)

Design tools & simulation

SIMULATION MODEL Download
SLOM258A.ZIP (55 KB) - PSpice Model
SIMULATION MODEL Download
SLOM259A.ZIP (59 KB) - TINA-TI Spice Model
SIMULATION MODEL Download
SLOM260A.TSC (723 KB) - TINA-TI Reference Design
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

CAD/CAE symbols

Package Pins Download
DSBGA (YZG) 12 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos