TPA751

ACTIVE

700-mW Mono, Differential Input, Class-AB Audio Amplifier with Active Low Shutdown

Top

Product details

Parameters

Audio input type Analog Input Architecture Class-AB Speaker channels (Max) Mono Power stage supply (Max) (V) 5.5 Power stage supply (Min) (V) 2.5 Load (Min) (ohms) 8 Output power (W) 0.7 THD + N @ 1 kHz (%) 0.5 Iq (Typ) (mA) 1.45 Control interface Hardware Closed/open loop Closed Analog supply (Min) (V) 2.5 Analog supply (Max) (V) 5.5 PSRR (dB) 85 Operating temperature range (C) -40 to 85 open-in-new Find other Speaker amps

Package | Pins | Size

HVSSOP (DGN) 8 15 mm² 3 x 4.9 SOIC (D) 8 19 mm² 3.91 x 4.9 open-in-new Find other Speaker amps

Features

  • Fully Specified for 3.3-V and 5-V Operation
  • Wide Power Supply Compatibility 2.5 V – 5.5 V
  • Power Supply Rejection at 217 Hz
    • 84 dB at VDD = 5 V
    • 81 dB at VDD = 3.3 V
  • Output Power for RL = 8
    • 700 mW at VDD = 5 V
    • 250 mW at VDD = 3.3 V
  • Ultralow Supply Current in Shutdown Mode . . . 1.5 nA
  • Thermal and Short-Circuit Protection
  • Surface-Mount Packaging
    • SOIC
    • PowerPAD™ MSOP
    • MicroStar Junior™ (BGA)

PowerPAD and MicroStar Junior are trademarks of Texas Instruments.

open-in-new Find other Speaker amps

Description

The TPA751 is a bridge-tied load (BTL) audio power amplifier developed especially for low-voltage applications where internal speakers are required. Operating with a 3.3-V supply, the TPA751 can deliver 250-mW of continuous power into a BTL 8- load at less than 0.6% THD+N throughout voice band frequencies. Although this device is characterized out to 20 kHz, its operation is optimized for narrower band applications such as wireless communications. The BTL configuration eliminates the need for external coupling capacitors on the output in most applications, which is particularly important for small battery-powered equipment. This device features a shutdown mode for power-sensitive applications with a supply current of 1.5 nA during shutdown. The TPA751 is available in a 3.0 × 3.0 mm MicroStar Junior™ (BGA), 8-pin SOIC surface-mount package and a surface-mount PowerPAD™ MSOP.

open-in-new Find other Speaker amps
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 2
Type Title Date
* Datasheet 700-mW Mono Low-Voltage Audio Power Amplifier with Differential Inputs datasheet (Rev. C) Oct. 18, 2002
User guides TPA751MSOPEVM - User Guide Jul. 21, 2003

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
49
Description

A 700-mW bridge-tied load (BTL) mono amplifier with ultra-low supply current, active low shutdown current (ISD = 1.5 nA) and differential inputs. The TPA751 is characterized at 3.3 V and 5 V.

Features
  • Package: 8-pin MSOP PowerPAD™
  • 700-mW mono speaker drive
  • Active low shutdown control (1.5 nA)
  • Differential inputs
  • MSOP PowerPAD package

Design tools & simulation

SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
CALCULATION TOOLS Download
Coefficient Calculator For Digital Biquad Filters
COEFFICIENT-CALC COEFFICIENT-CALC (TIBQ) calculates the coefficients for the digital filter biquad transfer function implemented in TI audio codecs. The characteristics of the digital filter are adjusted by selecting a filter type and moving a control point within a window that shows the transfer function gain and (...)

CAD/CAE symbols

Package Pins Download
HVSSOP (DGN) 8 View options
SOIC (D) 8 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos