Product details

Number of channels (#) 1 IO capacitance (Typ) (pF) 12 Vrwm (V) 5.5 IEC 61000-4-2 contact (+/- kV) 30 IEC 61000-4-5 (A) 6 Features Bi-/uni-directional Bi-Directional IO leakage current (Max) (nA) 100 Rating Catalog Operating temperature range (C) -40 to 125 Dynamic resistance (Typ) (Ω) 0.8 Clamping voltage (V) 10
Number of channels (#) 1 IO capacitance (Typ) (pF) 12 Vrwm (V) 5.5 IEC 61000-4-2 contact (+/- kV) 30 IEC 61000-4-5 (A) 6 Features Bi-/uni-directional Bi-Directional IO leakage current (Max) (nA) 100 Rating Catalog Operating temperature range (C) -40 to 125 Dynamic resistance (Typ) (Ω) 0.8 Clamping voltage (V) 10
SOT-5X3 (DYA) 2 1 mm² 0.8 x 1.2 SOT-5X3 (DYA) 2 X1SON (DPY) 2 1 mm² .6 x 1
  • Provides system-level ESD protection for low-voltage I/O interface
  • IEC 61000-4-2 level 4 ESD protection
    • ±30 kV contact discharge
    • ±30 kV air-gap discharge
  • IEC 61000-4-5 surge: 6 A (8/20 µs)
  • I/O capacitance 12 pF (typical)
  • RDYN 0.4 Ω (typical)
  • DC breakdown voltage ±6 V (minimum)
  • Ultralow leakage current 100 nA (maximum)
  • 10-V clamping voltage (maximum at IPP = 1 A)
  • Industrial temperature range: –40°C to 125°C
  • Small 0402 footprint (1 mm × 0.6 mm × 0.5 mm)
  • Industry standard SOD-523 package (0.8 mm × 1.2 mm)
  • Provides system-level ESD protection for low-voltage I/O interface
  • IEC 61000-4-2 level 4 ESD protection
    • ±30 kV contact discharge
    • ±30 kV air-gap discharge
  • IEC 61000-4-5 surge: 6 A (8/20 µs)
  • I/O capacitance 12 pF (typical)
  • RDYN 0.4 Ω (typical)
  • DC breakdown voltage ±6 V (minimum)
  • Ultralow leakage current 100 nA (maximum)
  • 10-V clamping voltage (maximum at IPP = 1 A)
  • Industrial temperature range: –40°C to 125°C
  • Small 0402 footprint (1 mm × 0.6 mm × 0.5 mm)
  • Industry standard SOD-523 package (0.8 mm × 1.2 mm)

The TPD1E10B06 is a single-channel ESD TVS diode in a small 0402 package convenient for space contrained applications and an industry standard SOD-523 package. This TVS protection product offers ±30 kV contact ESD, ±30 kV IEC air-gap protection, and has an ESD clamp circuit with a back-to-back TVS diode for bipolar or bidirectional signal support. The 12 pF line capacitance of this ESD protection diode is suitable for a wide range of applications supporting data rates up to 400 Mbps.

Typical applications of this ESD protection product are circuit protection for audio lines (microphone, earphone, and speakerphone), SD interfacing, keypad or other buttons, VBUS pin and ID pin of USB ports, and general-purpose I/O ports.This ESD clamp is good for the protection of end equipment like portable devices, wearables, set-top boxes, electronic point-of-sale equipment, appliances, and products for building automation.

The TPD1E10B06 is a single-channel ESD TVS diode in a small 0402 package convenient for space contrained applications and an industry standard SOD-523 package. This TVS protection product offers ±30 kV contact ESD, ±30 kV IEC air-gap protection, and has an ESD clamp circuit with a back-to-back TVS diode for bipolar or bidirectional signal support. The 12 pF line capacitance of this ESD protection diode is suitable for a wide range of applications supporting data rates up to 400 Mbps.

Typical applications of this ESD protection product are circuit protection for audio lines (microphone, earphone, and speakerphone), SD interfacing, keypad or other buttons, VBUS pin and ID pin of USB ports, and general-purpose I/O ports.This ESD clamp is good for the protection of end equipment like portable devices, wearables, set-top boxes, electronic point-of-sale equipment, appliances, and products for building automation.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 17
Type Title Date
* Data sheet TPD1E10B06 Single-Channel ESD Protection Diode datasheet (Rev. F) 01 Oct 2021
User guide Generic ESD Evaluation Module User's Guide (Rev. A) 27 Sep 2021
White paper Demystifying surge protection 06 Nov 2018
Technical article No strings attached: Creating next-generation wireless patient monitors 29 Jun 2018
Selection guide System-Level ESD Protection Guide (Rev. C) 20 Feb 2018
Technical article ESD fundamentals, part 4: ESD capacitance 12 Feb 2018
Selection guide ESD by Interface Selection Guide (Rev. A) 26 Jun 2017
Application note Does BAV99 Really Protect My System from ESD? 24 May 2017
Design guide 18-V/400-W 98% Efficient Compact Brushless DC Motor Drive Design Guide 23 Aug 2016
White paper Designing USB for short-to-battery tolerance in automotive environments 10 Feb 2016
Application note ESD Layout Guide 04 Mar 2015
Technical article Forget the battery with Near Field Communication (NFC) and MSP430 FRAM MCUs 24 Jul 2014
Analog design journal 1Q 2013Issue Analog Applications Journal 22 Jan 2013
Analog design journal 4Q 2012 Issue Analog Applications Journal 25 Sep 2012
Analog design journal Design Considerations for System-Level ESD Circuit Protection 25 Sep 2012
User guide ESD PROTECTION DIODES EVM 26 Mar 2012
Application note Reading and Understanding an ESD Protection Datasheet 19 May 2010

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ27Z561EVM-011 — BQ27Z561 1S-cell programmable battery manager Evaluation module

This evaluation module (EVM) is a complete evaluation system for the bq27z561 battery management system. The EVM includes bq27z561  and bq2980  circuit modules and a link to Windows® based PC software. The circuit modules includes bq27z561 and bq2980 integrated circuits (ICs), and (...)
In stock
Limit: 1
Evaluation board

BQ27Z746EVM-047 — BQ27Z746 evaluation module Impedance Track™ technology battery gas gauge with protection solution

The BQ27Z746EVM-047 evaluation module (EVM) is a complete evaluation system for the BQ27Z746 battery manager. The EVM includes BQ27Z746 with integrated protection circuit module and a link to Windows® based PC software. The BQ27Z746 integrated circuit (IC) and all onboard components are (...)

In stock
Limit: 5
Evaluation board

BQ40Z80EVM-020 — BQ40Z80 2s-7s Battery Gauge Evaluation Module

The bq40z80 EVM includes one bq40z80, two bq771807 secondary protectors, and a link to Microsoft Windows based PC software, which can be used to monitor and predict capacity, perform cell balancing, monitor critical parameters, protect the cells from overcharge, over-discharge, short circuit, and (...)
In stock
Limit: 3
Evaluation board

BQ76942EVM — 3-series to 10-series Li-ion, Li-polymer and LiFePO4 battery monitor and protector EVM

The BQ76942EVM evaluation module (EVM) is a complete evaluation system for the BQ76942, a 3-cell to 10-cell Li-Ion battery monitor integrated circuit. The EVM consists of a BQ76942 circuit module which is used for simple evaluation of the BQ76942 monitor function. The circuit module includes one (...)

In stock
Limit: 1
Evaluation board

BQ76952EVM — 3-s to 16-s Li-ion, Li-polymer, and LiFePO4 battery monitor and protector evaluation module

The BQ76952EVM evaluation module (EVM) is a complete evaluation system for the BQ76952, a 3-cell to 16-cell Li-Ion battery monitor integrated circuit. The EVM consists of a BQ76952 circuit module which is used for simple evaluation of the BQ76952 monitor function. The circuit module includes one (...)

In stock
Limit: 1
Evaluation board

ESD-EVM-001 — ESD-EVM-001 Evaluation Module

The “ESD EVM” features a series of ESD protection diodes and can be used for destructive electrostatic discharge (ESD) pass/fail ESD strike, continuity, and signal pass-through tests. Specifically, it could be used for both IEC-61000-4-2 air and contact discharge tests. The procedure outlined below (...)

In stock
Limit: 5
Evaluation board

ESDEVM — Generic ESD Evaluation Module

Texas Instrument's ESDEVM evaluation module allows the evaluation of most of TI's ESD portfolio. The board comes with all traditional ESD footprints in order to be able to test any number of devices. Devices that need to be tested can be soldered onto their respect footprint and then tested. For (...)
In stock
Limit: 3
Development kit

EVMK2GXS — 66AK2Gx (K2G) 1GHz High-Secure Evaluation Module

The K2G 1GHz High Secure Evaluation Module (EVM) enables developers to start  evaluating and testing the programming of the  high secure developmental version of the  66AK2Gx processor, and to accelerate the next stage of secure boot product development of audio and industrial real (...)

Simulation model

TPD1E10B06 IBIS Model

SLLM174.ZIP (3 KB) - IBIS Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Simulation tool

TINA-TI — SPICE-based analog simulation program

TINA-TI provides all the conventional DC, transient and frequency domain analysis of SPICE and much more. TINA has extensive post-processing capability that allows you to format results the way you want them. Virtual instruments allow you to select input waveforms and probe circuit nodes voltages (...)
Many TI reference designs include the TPD1E10B06

Use our reference design selection tool to review and identify designs that best match your application and parameters.

Package Pins Download
SOT-5X3 (DYA) 2 View options
X1SON (DPY) 2 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos