Product details


Current limit (Min) (A) 7 Driver configuration High Side Current limit type Adjustable Current limit accuracy +/-20% @ 0.5A HBM ESD (kV) 4 Input threshold CMOS, TTL Current sense accuracy +/-5mA @ 5mA, +/-30mA @ 1A Features Current sense/monitor, Digital output, Thermal shutdown, Under voltage lock out open-in-new Find other High-side switches

Package | Pins | Size

HTSSOP (PWP) 14 32 mm² 5 x 6.4 open-in-new Find other High-side switches


  • Qualified for automotive applications
  • AEC-Q100 Qualified with the following results:
    • Device temperature grade 1: –40°C to 125°C ambient operating temperature range
    • Device HBM ESD classification level H3A
    • Device CDM ESD classification level C4B
  • Functional safety capable
    • Documentation available to aid functional safety system design
  • Single-channel smart high-side power switch with full diagnostics
    • Version A: open-drain status output
    • Version B: current sense analog output
  • Wide operating voltage 3.5 to 40 V
  • Very-low standby current, <0.5 µA
  • Operating junction temperature, –40 to 150°C
  • Input control, 3.3-V and 5-V logic compatible
  • High-accuracy current sense, ±30 mA at 1 A,
    ±4 mA at 5 mA
  • Programmable current limit with external resistor, ±20% at 0.5 A
  • Diagnostic enable function for multiplexing of mcu analog or digital interface
  • Tested according to AECQ100-12 Grade A,
    1 million times Short to GND test
  • Electrical transient disturbance immunity certification of ISO7637-2 and ISO16750-2
  • Protection
    • Overload and short-circuit protection
    • Inductive load negative voltage clamp
    • Undervoltage lockout (UVLO) protection
    • Thermal shutdown/swing with self recovery
    • Loss of GND, loss of supply protection
    • Reverse battery protection with external circuitry
  • Diagnostic
    • On- and Off-state output open- and short-to-battery detection
    • Overload and short to ground detection and current limit
    • Thermal shutdown/swing detection
  • 14-Pin Thermally-enhanced PWP package

All trademarks are the property of their respective owners.

open-in-new Find other High-side switches


The TPS1H100-Q1 device is a fully protected high-side power switch, with integrated NMOS power FET and charge pump, targeted for the intelligent control of the variable kinds of resistive, inductive, and capacitive loads. Accurate current sense and programmable current limit features differentiate it from the market.

open-in-new Find other High-side switches

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 20
Type Title Date
* Datasheet TPS1H100-Q1 40-V, 100-mΩ Single-Channel Smart High-Side Power Switch datasheet (Rev. D) Dec. 17, 2019
Application notes How To Drive Resistive, Inductive, Capacitive, and Lighting Loads (Rev. B) Aug. 17, 2020
Application notes Designing for Loss of Ground on Texas Instruments High-Side Switches (Rev. A) Jul. 16, 2020
Application notes Fault and Normal Diagnostic Considerations for Smart High Side Switches Jul. 10, 2020
White papers Streamlining Functional Safety Certification in Automotive and Industrial Jun. 09, 2020
White papers Streamlining Functional Safety Certification in Automotive and IndustrialN Jun. 09, 2020
White papers 자동차 및 산업 분야의 기능적 안전성 인증 간소화 Jun. 09, 2020
Application notes TPS1H100-Q1 Functional Safety FIT Rate and Failure Mode Distribution Dec. 16, 2019
Application notes High Accuracy Current Sense of Smart High Side Switches Nov. 01, 2019
White papers 11 Ways to Protect Your Power Path white paper Jul. 03, 2019
Application notes AEC-Q100-012 Short-Circuit Reliability Test Results for Smart Power Switches (Rev. A) May 06, 2019
Application notes Basics of Power Switches (Rev. A) Apr. 26, 2019
Application notes Improved Automotive Short Circuit Reliability With Adjustable Current Limiting (Rev. A) Apr. 11, 2019
Application notes Adjustable Current Limit of Smart Power Switches (Rev. B) Jan. 21, 2019
Application notes Reverse battery protection for high side switches Nov. 12, 2018
Technical articles How can a load switch extend your device’s battery life? Mar. 20, 2018
Technical articles How and why you should use load switches for power sequencing Feb. 06, 2018
Technical articles How to use load switches and eFuses in your set-top box design Nov. 23, 2017
Technical articles Don’t leave it floating! Power off your outputs with quick output discharge Dec. 09, 2016
User guides TPS1H100-Q1 EVM User's Guide Oct. 01, 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

document-generic User guide

Texas Instruments TPS1H100-Q1 evaluation module contains a TPS1H100-Q1 integrated circuit (IC), supporting 1 channel high side driver application. The purpose of this EVM is to facilitate evaluation of the TPS1H100-Q1 for resistive, capacitive, inductive load layout of the EVM


  • Single Channel High side power switch, tested according to AECQ100-12
  • Operating Voltage 5-40V, extended operating down to 3.5V.
  • Very low standby current, <1uA
  • High accuracy Current Sense (version B)
  • Programmable current limit functions

Design tools & simulation

SLVMAI7B.ZIP (58 KB) - PSpice Model
SLVMAI8C.ZIP (86 KB) - PSpice Model
SLVMBG1A.ZIP (26 KB) - TINA-TI Spice Model
SLVMBG2A.TSC (181 KB) - TINA-TI Reference Design
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

Reference designs

Automotive HVAC control reference design with HMI
TIDA-020010 — This reference design offers a cost-effective solution for a heating, ventilation, and air conditioning (HVAC) human-machine interface (HMI) application. This reference design incorporates a synchronous step-down converter, multiple channel half-bridge motor driver for brushed DC motors (BDC (...)
document-generic Schematic document-generic User guide
Multi-sensor platform reference design on Jacinto™ ADAS processors
TIDEP-01008 The multi-sensor platform reference design for Advanced Driver Assistance Systems (ADAS) from D3 Engineering provides qualified developers with a fully functioning evaluation platform for testing and development of ADAS applications, for use primarily in the automotive industry.  D3 also offers (...)
document-generic Schematic document-generic User guide
Automotive Power Trunk Lift Motor Drive Reference Design
TIDA-060009 This design describes how to drive an automotive trunk lift or rear gate lift.

In this design, a brushed BD lift motor and electromagnetic clutch drive mechanisms for a typical gear driven lift. This design includes a warning beeper, LED indicator, and directional control that uses an automotive (...)
document-generic Schematic document-generic User guide
Automotive Off-battery Dual-phase Boost Converter Reference Design
TIDA-01534 — This reference design is a high power, wide input voltage range circuit that uses synchronous boost controllers in a dual-phase configuration outputting four (4) switchable 12-V rails that each can supply up to 2.5 A with diagnostic features; plus a dual synchronous buck that generates two high (...)
document-generic Schematic document-generic User guide
Reference Design for Automotive, Proportional-Solenoid Current Sensor
TIDA-01506 — Precision control of automotive proportional solenoids is necessary to achieve the precise control in an automatic transmission, in electronic fuel injectors, and in several automotive actuator applications. In proportional solenoids, the current flowing through the coil is directly  oportional (...)
document-generic Schematic document-generic User guide
Automotive Ultrasonic Kick-to-Open Reference Design
TIDA-01424 — This reference design uses ultrasonic sensing to detect a kicking motion indicating the user's desire to activate a power lift-gate, power trunk, or power sliding door on an automobile.  Ultrasonic sensing allows detection of more than one object, and gives a measure of distance to each object (...)
document-generic Schematic document-generic User guide
Automotive ADAS Reference Design for Four Camera Hub with Integrated ISP and DVP Outputs
TIDA-00455 — The TIDA-00455 camera hub reference design allows up to four 1.3 Megapixel cameras to be connected to a TDA2x SoC Evaluation Module (EVM). Each camera connects to the hub through a single coax cable.  There are two OmniVision OV490 ISPs on the board that process the video and export it in (...)
document-generic Schematic document-generic User guide
document-generic Schematic document-generic User guide
Automotive high-side dimming rear light reference design
TIDA-00846 The TI design is for automotive high side dimming rear light, which uses BCM to supply the rear light. In the TI design the high side driver TPS1H100-Q1 is used to output PWM supply with different duty cycle. Linear LED drivers TPS92630-Q1 and TPS92638-Q1 are used to drive the LEDs in constant (...)
document-generic Schematic document-generic User guide
Automotive Body Control Module Driver Reference Design
TIDA-00296 TIDA-00296 is a reference design that highlights TI's high-side and low-side relay, motor, and load driver portfolios. The loads for this design (door locks, window lifts, seat heaters, HVAC, lamps, and LEDs) were chosen to show the range of loads that a BCM can drive and how TI's solutions fit into (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
HTSSOP (PWP) 14 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​


Related videos