Top

Product details

Parameters

Vin (Min) (V) 2.7 Vin (Max) (V) 5.5 Continuous current (Max) (A) 0.5 Current limit (A) 1 Enable Active High Number of switches 3 Rating Catalog open-in-new Find other USB power switches & charging port controllers

Package | Pins | Size

SOIC (D) 16 59 mm² 9.9 x 6 open-in-new Find other USB power switches & charging port controllers

Features

  • 70-mΩ High-Side MOSFET
  • 500-mA Continuous Current
  • Thermal and Short-Circuit Protection
  • Accurate Current Limit
    (0.75 A Minimum, 1.25 A Maximum)
  • Operating Range: 2.7 V to 5.5 V
  • 0.6-ms Typical Rise Time
  • Undervoltage Lockout
  • Deglitched Fault Report (OC)
  • No OC Glitch During Power Up
  • Maximum Standby Supply Current:
    1-µA (Single, Dual) or 2-µA (Triple, Quad)
  • Ambient Temperature Range: –40°C to 85°C
  • UL Recognized, File Number E169910
  • Additional UL Recognition for TPS2042B and TPS2052B for Ganged Configuration

All trademarks are the property of their respective owners.

open-in-new Find other USB power switches & charging port controllers

Description

The TPS20xxB power-distribution switches are intended for applications where heavy capacitive loads and short circuits are likely to be encountered. These devices incorporates 70-mΩ N-channel MOSFET power switches for power-distribution systems that require multiple power switches in a single package. Each switch is controlled by a logic enable input. Gate drive is provided by an internal charge pump designed to control the power-switch rise times and fall times to minimize current surges during switching. The charge pump requires no external components and allows operation from supplies as low as 2.7 V.

When the output load exceeds the current-limit threshold or a short is present, the device limits the output current to a safe level by switching into a constant-current mode, pulling the overcurrent (OCx) logic output low. When continuous heavy overloads and short circuits increase the power dissipation in the switch, causing the junction temperature to rise, a thermal protection circuit shuts off the switch to prevent damage. Recovery from a thermal shutdown is automatic once the device has cooled sufficiently. Internal circuitry ensures that the switch remains off until valid input voltage is present. This power-distribution switch is designed to set current limit at 1 A (typical).

open-in-new Find other USB power switches & charging port controllers
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 5
Type Title Date
* Datasheet TPS20xxB Current-Limited, Power-Distribution Switches datasheet (Rev. M) Jun. 19, 2016
Selection guide Power Management Guide 2018 (Rev. R) Jun. 25, 2018
Technical articles Automotive electronics design made easy Jul. 18, 2013
Technical articles John discusses benefits of LEDs in automobiles Jul. 16, 2013
User guide Three-Channel Power Distribuiton Switch EVM (Rev. A) Mar. 13, 2008

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

CAD/CAE symbols

Package Pins Download
SOIC (D) 16 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos