TPS22811
2.7-V to 16-V, 10-A, 6-mΩ load switch with fast overvoltage protection and current monitoring
TPS22811
- Wide operating input voltage range: 2.7 V to 16 V
- 20-V absolute maximum
- Integrated FET with low on-resistance: RON = 6 mΩ (typ.)
- Adjustable output slew rate control (dVdt)
- Active high enable input with adjustable undervoltage lockout threshold (UVLO)
- Active low enable input with adjustable undervoltage lockout threshold (OVLO)
- Fast overvoltage protection
- Adjustable overvoltage lockout (OVLO) with 1.2-µs (typ.) response time
- Analog load current monitor output (IMON)
-
- ±9 % accuracy for IOUT > 3 A
-
- Fast-trip response for short-circuit protection in steady-state
- 640-ns (typ.) response time
- Fixed threshold
- Overtemperature protection
-
Power-good (PG) indication with adjustable threshold (PGTH)
- Quick Output Discharge
- Small footprint: QFN 2 mm × 2 mm, 0.45-mm pitch
The TPS22811x is a highly-integrated, power-distribution solution in a small package. The device allows control and monitoring of power supply rails using minimum number of external components.
Output slew rate and inrush current can be adjusted using one external capacitor. Loads are protected from input overvoltage conditions by cutting off the output if input exceeds an adjustable overvoltage threshold. The device integrates a fast-trip response to provide protection against severe faults at the output during steady-state.
The devices provide an accurate analog sense of the output load current as well as a digital power-good indication to help with system monitoring and diagnostics.
The devices are available in a 2-mm × 2-mm, 10-pin HotRod™ QFN package for improved thermal performance and reduced system footprint.
The devices are characterized for operation over a junction temperature range of –40°C to +125°C.
Technical documentation
| Type | Title | Date | ||
|---|---|---|---|---|
| * | Data sheet | TPS22811x 2.7 V – 16 V, 10-A, 6-mΩ Load Switch with Adjustable Overvoltage Protection and Current Monitoring datasheet (Rev. A) | PDF | HTML | 19 Jul 2022 |
| EVM User's guide | TPS22811EVM: Evaluation Module for TPS22811 Load Switch (Rev. A) | PDF | HTML | 30 Jun 2022 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.
TPS22811EVM — TPS22811 evaluation module for 2.7-V to 16-V, 10-A, 6-mΩ load switch
The TPS22811EVM load switch evaluation board allows reference circuit evaluation of TPS22811 load switch. The TPS22811 device is a 2.7-V to 16-V, 10-A load switch with integrated 6-mΩ FET with inrush current protection, programmable under voltage and over voltage protection, current monitoring and (...)
PSPICE-FOR-TI — PSpice® for TI design and simulation tool
| Package | Pins | Download |
|---|---|---|
| VQFN-HR (RPW) | 10 | View options |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
- Fab location
- Assembly location
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.