Top

Product details

Parameters

Number of channels (#) 1 Vin (Min) (V) 1.05 Vin (Max) (V) 5.5 Imax (A) 2 Ron (Typ) (mOhm) 38 Shutdown current (ISD) (Typ) (uA) 0.5 Quiescent current (Iq) (Typ) (uA) 7.7 Soft start Fixed Rise Time Rise time (Typ) (us) 64, 913 Current limit type None Features Quick output discharge Operating temperature range (C) -40 to 105 open-in-new Find other Load switches

Package | Pins | Size

DSBGA (YFP) 4 0 mm² .788 x .788 open-in-new Find other Load switches

Features

  • Integrated Single Channel Load Switch
  • Input Voltage Range: 1.05 V to 5.5 V
  • Low On-Resistance (RON)
    • RON = 37 mΩ (Typical) at VIN = 5 V
    • RON = 38 mΩ (Typical) at VIN = 3.3 V
    • RON = 43 mΩ (Typical) at VIN = 1.8 V
  • 2-A Maximum Continuous Switch Current
  • Low Quiescent Current
    • 7.7 µA (Typical) at VIN = 3.3 V
  • Low Control Input Threshold Enables Use of 1 V or Higher GPIO
  • Controlled Slew Rate
    • tR(TPS22914B/15B) = 64 µs at VIN = 3.3 V
    • tR(TPS22914C/15C) = 913 µs at VIN = 3.3 V
  • Quick Output Discharge (TPS22915 only)
  • Ultra-Small Wafer-Chip-Scale Package
    • 0.78 mm × 0.78 mm, 0.4-mm Pitch, 0.5-mm Height (YFP)
  • ESD Performance Tested per JESD 22
    • 2-kV HBM and 1-kV CDM
open-in-new Find other Load switches

Description

The TPS22914/15 is a small, low RON, single channel load switch with controlled slew rate. The device contains an N-channel MOSFET that can operate over an input voltage range of 1.05 V to 5.5 V and can support a maximum continuous current of 2 A. The switch is controlled by an on and off input, which is capable of interfacing directly with low-voltage control signals.

The small size and low RON makes the device ideal for being used in space constrained, battery powered applications. The wide input voltage range of the switch makes it a versatile solution for many different voltage rails. The controlled rise time of the device greatly reduces inrush current caused by large bulk load capacitances, thereby reducing or eliminating power supply droop. The TPS22915 further reduces the total solution size by integrating a 143-Ω pull-down resistor for quick output discharge (QOD) when the switch is turned off.

The TPS22914/15 is available in a small, space-saving 0.78 mm x 0.78 mm, 0.4-mm pitch, 0.5-mm height 4-pin Wafer-Chip-Scale (WCSP) package (YFP). The device is characterized for operation over the free-air temperature range of –40°C to +105°C.

open-in-new Find other Load switches
Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 15
Type Title Date
* Data sheet TPS2291xx, 5.5-V, 2-A, 37-mΩ On-Resistance Load Switch datasheet (Rev. E) Oct. 21, 2020
E-book 11 Ways to Protect Your Power Path white paper Jul. 03, 2019
Application note Making the Switch to an Integrated Load Switch Jun. 11, 2019
Application note Integrated Load Switches Versus Discrete MOSFETs (Rev. A) May 06, 2019
Application note Basics of Power Switches (Rev. A) Apr. 26, 2019
Application note Load Switch Thermal Considerations (Rev. A) Oct. 11, 2018
Application note Basics of Load Switches (Rev. A) Sep. 05, 2018
Technical article How can a load switch extend your device’s battery life? Mar. 20, 2018
Application note Power Supply Design for NXP i.MX 6 Using the TPS65023 Feb. 22, 2018
Technical article How and why you should use load switches for power sequencing Feb. 06, 2018
Technical article How to use load switches and eFuses in your set-top box design Nov. 23, 2017
Application note Selecting a Load Switch to Replace a Discrete Solution Apr. 30, 2017
Technical article Don’t leave it floating! Power off your outputs with quick output discharge Dec. 09, 2016
Application note Implementing Ship Mode Using the TPS22915B Load Switches Sep. 12, 2016
User guide Using the TPS22915BEVM-078 Single Channel Load Switch IC (Rev. A) Aug. 27, 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
TPS22915B evaluation module
TPS22915BEVM-078
document-generic User guide
25
Description

The TPS22914/15EVM-078 is a two sided PCB containing the TPS22914/15 load switch device. The VIN and VOUT connections to the device and the PCB layout routing are capable of handling high continuous currents and provide a low resistance pathway into and out of the device under test. Test point (...)

Features
  • Input voltage range: 1.05 V to 5.5 V
  • 2-A max continuous current operation
  • Access to the VIN, VOUT, GND, and ON pins
  • On board CIN and COUT capacitors
  • VIN and VOUT sense pins to measure the voltage drop from VIN to VOUT and calculate the resistance
EVALUATION BOARD Download
document-generic User guide
25
Description

The TPS22914/15EVM-078 is a two sided PCB containing the TPS22914/15 load switch device. The VIN and VOUT connections to the device and the PCB layout routing are capable of handling high continuous currents and provide a low resistance pathway into and out of the device under test. Test point (...)

Features
  • Input voltage range: 1.05 V to 5.5 V
  • 2-A max continuous current operation
  • Access to the VIN, VOUT, GND, and ON pins
  • On board CIN and COUT capacitors
  • VIN and VOUT sense pins to measure the voltage drop from VIN to VOUT and calculate the resistance

Design tools & simulation

SIMULATION MODEL Download
SLVMAC2A.ZIP (48 KB) - PSpice Model
SIMULATION MODEL Download
SLVMAG3A.ZIP (52 KB) - PSpice Model
SIMULATION MODEL Download
SNVM667.ZIP (3 KB) - PSpice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

Reference designs

REFERENCE DESIGNS Download
Load Switch Based Ship Mode Reference Design for Wearables
TIDA-00556 The TIDA-00556 is a low power, space saving "ship mode" reference design targeted specifically for wearables and other small portable electronics that can be implemented with a simple, low cost load switch.
document-generic Schematic
REFERENCE DESIGNS Download
High fidelity, near-field two-way audio reference design with noise reduction and echo cancellation
TIDA-01589 — Man machine interaction requires an acoustic interface for providing full duplex hands-free communication. In hands-free mode, part of the far-end or near-end audio signal from the speaker is coupled to the microphones. Furthermore, in noisy environments the microphones also capture ambient noise in (...)
document-generic Schematic
REFERENCE DESIGNS Download
Power Reduction Using Dynamic Switching Reference Design
TIDA-00675 The TIDA-00675 shows the power reduction benefits of dynamically switching a load on/off using a load switch. The design guide shows how frequency of switching, duty cycle, and the use of a discharge resistor can have an impact on power consumption.
document-generic Schematic

CAD/CAE symbols

Package Pins Download
DSBGA (YFP) 4 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos