Product details

Number of supplies monitored 1 Threshold voltage 1 (Typ) (V) Adjustable Features Wide input voltage Reset threshold accuracy (%) 0.75 Output driver type/reset output Active-low, Open-drain Time delay (ms) 0 Rating Catalog Watchdog timer WDI (sec) None Operating temperature range (C) -40 to 125
Number of supplies monitored 1 Threshold voltage 1 (Typ) (V) Adjustable Features Wide input voltage Reset threshold accuracy (%) 0.75 Output driver type/reset output Active-low, Open-drain Time delay (ms) 0 Rating Catalog Watchdog timer WDI (sec) None Operating temperature range (C) -40 to 125
SOT-23-THN (DDC) 6 5 mm² 2.9 x 1.6
  • Wide Supply Voltage Range: 1.8 V to 36 V
  • Adjustable Threshold: Down to 400 mV
  • Open-Drain Output for Undervoltage Detection
  • Low Quiescent Current: 7 µA (Typical)
  • High Threshold Accuracy:
    • 0.75% Over Temperature
    • 0.25% (Typical)
  • Internal Hysteresis: 5.5 mV (Typical)
  • Temperature Range: –40°C to +125°C
  • Package: SOT-6
  • Wide Supply Voltage Range: 1.8 V to 36 V
  • Adjustable Threshold: Down to 400 mV
  • Open-Drain Output for Undervoltage Detection
  • Low Quiescent Current: 7 µA (Typical)
  • High Threshold Accuracy:
    • 0.75% Over Temperature
    • 0.25% (Typical)
  • Internal Hysteresis: 5.5 mV (Typical)
  • Temperature Range: –40°C to +125°C
  • Package: SOT-6

The TPS3711 wide-supply voltage comparator operates over a 1.8-V to 36-V range. The device has a precision comparator with an internal 400-mV reference and an open-drain output rated to 25 V for undervoltage detection. Set the monitored voltage with the use of external resistors.

OUT is driven low when the voltage at the SENSE pin drops below the negative threshold, and goes high when the voltage returns above the positive threshold. The comparator in the TPS3711 includes built-in hysteresis for noise rejection, thereby ensuring stable output operation without false triggering.

The TPS3711 is available in a SOT-6 package, and is specified over the junction temperature range of –40°C to +125°C.

 

 

The TPS3711 wide-supply voltage comparator operates over a 1.8-V to 36-V range. The device has a precision comparator with an internal 400-mV reference and an open-drain output rated to 25 V for undervoltage detection. Set the monitored voltage with the use of external resistors.

OUT is driven low when the voltage at the SENSE pin drops below the negative threshold, and goes high when the voltage returns above the positive threshold. The comparator in the TPS3711 includes built-in hysteresis for noise rejection, thereby ensuring stable output operation without false triggering.

The TPS3711 is available in a SOT-6 package, and is specified over the junction temperature range of –40°C to +125°C.

 

 

Download

Similar products you might be interested in

open-in-new Compare products
Same functionality with different pin-out to the compared device.
TPS3703 ACTIVE High-accuracy window supervisor with reset time delay This product offers high accuracy with fixed threshold voltages down to 0.5 V and programmable time delay

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 9
Type Title Date
* Data sheet TPS3711 36-V Voltage Detector datasheet (Rev. A) 13 Sep 2018
Technical article 3 quiescent-current (Iq) specifications you need to understand 12 Nov 2021
Technical article Monitoring 12-V automotive battery systems: Load-dump, cold-crank and false-reset management 24 Mar 2021
Application note Voltage Supervisors (Reset ICs): Frequently Asked Questions (FAQs) (Rev. A) 17 Mar 2020
Selection guide Voltage Supervisors (Reset ICs) Quick Reference Guide (Rev. H) 28 Feb 2020
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics 28 Jun 2019
Application note Adding Reset Delay to Voltage Detectors 09 Oct 2018
Application note Using Voltage Supervisors in High Voltage Applications 09 Oct 2018
Application note UCC27531 35-V Gate Driver for SiC MOSFET Applications (Rev. A) 08 May 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TMDX654GPEVM — AM65x evaluation module (EVM)

The AM65x Evaluation Module provides a platform to quickly start evaluation of Sitara™ Arm® Cortex®-A53 AM65x Processors (AM6548AM6546AM6528AM6527AM6526) and accelerate development for HMI, networking, patient monitoring, and other industrial applications. It is a development platform based (...)

Evaluation board

TMDX654HSEVM — AM65x high security (HS) evaluation module (EVM)

The AM65x high security (HS) evaluation module provides a platform to evaluate secure boot and other security features of Sitara™ Arm® Cortex®-A53 AM65x Processors (AM6548, AM6546, AM6528, AM6527, AM6526). It is a development platform based on the quad core Cortex-A53, dual Cortex-R5F processor (...)
Evaluation board

TMDX654IDKEVM — AM65x industrial development kit (IDK)

The AM65x industrial development kit (IDK) is a development platform for evaluating the industrial communication and control capabilities of Sitara™ AM65x processors for applications in factory automation, drives, robotics, grid infrastructure, and more. AM65x processors include three (...)

Out of stock on TI.com
Evaluation board

TPS3700EVM-114 — TPS3700 high-voltage (18-V) window voltage detector evaluation module for SOT-23 package

The Texas Instruments TPS3700EVM-114 evaluation module (EVM) helps designers evaluate the performance of the TPS3700 high-voltage (18 V), window comparator with overvoltage and undervoltage detection. The EVM has an IC for overvoltage and undervoltage monitoring and header connectors for easy (...)
In stock
Limit: 3
Simulation model

TPS3711 PSpice Transient Model

SBVM547.ZIP (52 KB) - PSpice Model
Simulation model

TPS3711 Unencrypted PSpice Transient Model

SBVM548.ZIP (2 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Reference designs

PMP22339 — High voltage 800-W SEPIC converter reference design for server battery backup charging

This discontinuous conduction mode (DCM) non-isolated 800-W SEPIC converter battery charger reference design provides an adjustable output voltage and current. The output voltage can be adjusted from 282 V to 400 V by setting an external DC voltage between 0 V to 3 V. The output charging current (...)
Package Pins Download
SOT-23-THIN (DDC) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos