Home Power management Supervisor & reset ICs

TPS3808-Q1

ACTIVE
Order now

Automotive, low-quiescent current programmable-delay supervisor

Data sheet
Top
Automotive, low-quiescent current programmable-delay supervisor

TPS3808-Q1

ACTIVE
Data sheet Order now

Product details

Parameters

Number of supplies monitored 1 Threshold voltage 1 (Typ) (V) Adjustable, 1.12, 1.16, 1.4, 1.67, 2.79, 3.07, 4.65 Features Active-low enable, Manual reset Reset threshold accuracy (%) 2 Output driver type/reset output Active-low, Open-drain Time delay (ms) Programmable TI functional safety category Functional Safety-Capable Rating Automotive Watchdog timer WDI (sec) None Operating temperature range (C) -40 to 125 open-in-new Find other Supervisor & reset ICs

Package | Pins | Size

SOT-23 (DBV) 6 5 mm² 2.9 x 1.6 WSON (DRV) 6 4 mm² 2 x 2 open-in-new Find other Supervisor & reset ICs

Features

  • Qualified for Automotive Applications
  • Power-On Reset Generator With Adjustable Delay Time: 1.25 ms to 10 s
  • Very Low Quiescent Current: 2.4 µA Typical
  • High Threshold Accuracy: 0.5% Typical
  • Fixed Threshold Voltages for Standard Voltage Rails From 1.2 V to 5 V and Adjustable Voltage Down to 0.4 V Are Available
  • Manual Reset (MR) Input
  • Open-Drain RESET Output
  • Temperature Range: –40°C to +125°C
  • Small SOT-23 Package and WSON Package (TPS3808G01QDRVRQ1 only)

All trademarks are the property of their respective owners.

open-in-new Find other Supervisor & reset ICs

Description

The TPS3808Gxx-Q1 microprocessor supervisory circuits monitor system voltages from 0.4 V to 5 V, asserting an open-drain RESET signal when the SENSE voltage drops below a preset threshold or when the manual reset (MR) pin drops to a logic low. The RESET output remains low for the user-adjustable delay time after the SENSE voltage and MR return above their thresholds.

The TPS3808Gxx-Q1 device uses a precision reference to achieve 0.5% threshold accuracy for VIT ≤ 3.3 V. The reset delay time can be set to 20 ms by disconnecting the CT pin, 300 ms by connecting the CT pin to VDD using a resistor, or can be user-adjusted from 1.25 ms to 10 s by connecting the CT pin to an external capacitor. The TPS3808Gxx-Q1 has a very low typical quiescent current of 2.4 µA, so it is well suited for battery-powered applications. The device is available in a small SOT-23 package (one option available in WSON) and is fully specified over a temperature range of –40°C to +125°C (TJ).

For more information about TI’s voltage supervisor portfolio, visit the Supervisor and Reset IC Overview Page page.

 open-in-new Find other Supervisor & reset ICs
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality but is not pin-for-pin or parametrically equivalent to the compared device:
NEW TLV840-Q1 PREVIEW Automotive low-voltage supervisor with adjustable-reset time delay and manual reset Same functionality but is not pin-for-pin or parametrically equivalent
TPS3890-Q1 ACTIVE Automotive low-quiescent current 1% accuracy supervisor with programmable delay A higher accuracy (1% maximum) device in a small package (1.5-mm by 1.5-mm WSON).
Similar but not functionally equivalent to the compared device:
TPS3840-Q1 ACTIVE Automotive high-input voltage supervisor with manual reset and programmable-reset time delay This device offers more fixed voltage threshold options, and has a wide 10-V input voltage, low IQ (350 nA) and 1% threshold accuracy.

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 6
Type Title Date
* Datasheet TPS3808Gxx-Q1 Low-Quiescent-Current Programmable-Delay Supervisory Circuit datasheet (Rev. J) Jun. 13, 2017
Functional safety information TPS3808-Q1 Functional Safety FIT Rate and Failure Mode Distribution Dec. 19, 2019
E-book Voltage Supervisor and Reset ICs: Tips, Tricks and Basics Jun. 28, 2019
User guide Automotive Power Reference Design for Low-Power TDA3x Based Systems (Rev. B) Jun. 14, 2017
User guide Automotive Power Frontend With Cold Crank Operation and EMI Filter Design Guide Nov. 30, 2015
User guide TIDA-00530 Test Results Oct. 13, 2015

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description
The TPS3808G01Q1EVM is an evaluation modulate (EVM) for the TPS3808G01-Q1 voltage supervisor. The EVM has a supply voltage range from 1.8 V to 6.5 V. It offers input connections for all device input and output pins. Test points are provided to give the user access to an extra ground connection (...)
Features
  • Qualified for automotive applications
  • Power-on reset (POR) generator with adjustable delay time: 1.25 ms to 10 s
  • Very-low quiescent current: 2.4 μA typical
  • High threshold accuracy: 0.5% typical
  • Fixed threshold voltages for standard voltage rails from 1.2 V to 5 V & adjustable voltage down to (...)
View details

Design tools & simulation

SIMULATION MODEL Download
SBVM030.TSC (208 KB) - TINA-TI Reference Design
SIMULATION MODEL Download
SBVM031.ZIP (41 KB) - TINA-TI Spice Model
SIMULATION MODEL Download
SLIM038B.ZIP (81 KB) - PSpice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
View details
SCHEMATIC Download
TIDRI97.PDF (684 KB)
SCHEMATIC Download
TIDRJK7.PDF (222 KB)
BILL OF MATERIALS (BOM) Download
TIDRI98.PDF (260 KB)
BILL OF MATERIALS (BOM) Download
TIDRJK8.PDF (257 KB)
CAD/CAE SYMBOL Download
TIDRI99.ZIP (2344 KB)
CAD/CAE SYMBOL Download
TIDRJK9.ZIP (626 KB)

Reference designs

REFERENCE DESIGNS Download
Electronics and LED Driver Reference Design for Augmented Reality Head-Up Displays
TIDA-080004 — This reference design provides an electronics subsystem designed to drive an automotive augmented reality (AR) head-up display (HUD). DLP® technology enables bright, crisp, highly saturated head-up displays that project critical driving information onto the windshield of the car, reducing driver (...)
document-generic Schematic
REFERENCE DESIGNS Download
Automotive Camera Module Reference Design with 1MPixel Imager, Bayer Video Output & Power over Coax
TIDA-01004 — The TIDA-01004 reference design is a remote automotive camera module that connects over a high speed serial video interface to a display or machine vision processing system. It uses TIs FPD-Link III SerDes technology to transmit uncompressed MegaPixel video data, bidirectional control signals and (...)
document-generic Schematic
REFERENCE DESIGNS Download
Automotive Power Reference Design for Low Power TDA3x Based Systems
TIDA-00530 — This solution was designed to make an integrated, size-optimized power design for ADAS applications using the TDA3x SoC off of an automotive battery input.  By targeting only applications with lower processing needs, we’re able to choose devices and components which are smaller, compared (...)
document-generic Schematic
REFERENCE DESIGNS Download
Front End Power Supply Reference Design with Cold Crank Operation, Transient Protection, EMI Filter
TIDA-00699 — This solution was designed to be a broadly applicable automotive off-battery front end power supply for 10-15W systems. There is a focus on EMI/EMC testing and compliance as well to help designers satisfy the regulatory requirements associated with producing an automotive electronic subsystem.
document-generic Schematic

CAD/CAE symbols

Package Pins Download
SOT-23 (DBV) 6 View options
WSON (DRV) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Training series

View all TI training and videos

Videos