4.5V to 23V Input, 3A Synchronous Step-Down Converter with D-CAP2 Mode
Product details
Parameters
Package | Pins | Size
Features
- D-CAP2 Mode Enables Fast Transient Response
- Low Output Ripple and Allows Ceramic Output Capacitor
- Wide VIN Input Voltage Range: 4.5 V to 23 V
- Output Voltage Range: 0.76 V to 7 V
- Highly Efficient Integrated FETs Optimized
for Lower Duty Cycle Applications
– 140 mΩ (High Side) and 70 mΩ (Low Side) - High Efficiency, less than 10 µA at shutdown
- High Initial Bandgap Reference Accuracy
- Adjustable Soft Start
- Pre-Biased Soft Start
- 600-kHz Switching Frequency (fSW)
- Cycle By Cycle Over Current Limit
Description
The TPS54339 is an adaptive on-time D-CAP2™ mode synchronous buck converter. The TPS54339 enables system designers to complete the suite of various end-equipment power bus regulators with a cost effective, low component count, low standby current solution. The main control loop for the TPS54339 uses the D-CAP2™ mode control that provides a fast transient response with no external compensation components. The TPS54339 also has a proprietary circuit that enables the device to adopt to both low equivalent series resistance (ESR) output capacitors, such as POSCAP or SP-CAP, and ultra-low ESR ceramic capacitors. The device operates from 4.5-V to 23-V VIN input. The output voltage can be programmed between 0.76 V and 7 V. The device also features an adjustable soft start time. The TPS54339 is available in the 8-pin DDA package, and designed to operate from –40°C to 85°C.
Special Note
Go to TI’s extensive portfolio of DC/DC point-of-load solutions.
Same functionality and pinout but is not an equivalent to the compared device:
Same functionality but is not pin-for-pin or parametrically equivalent to the compared device:
Technical documentation
| Type | Title | Date | |
|---|---|---|---|
| * | Datasheet | 4.5 V to 23 V Input, 3-A Synchronous Step-Down SWIFTTM Converter datasheet | Jan. 07, 2013 |
| Technical articles | Minimize the impact of the MLCC shortage on your power application | Mar. 29, 2019 | |
| User guide | TPS54339EVM-056, 3-A, Regulator Evaluation Module | Jan. 09, 2013 |
Design & development
For additional terms or required resources, click any title below to view the detail page where available.Hardware development
Description
Features
- 23V maximum input voltage
- Synchronous converter with integrated FETs
- DCAP2 control
- Fast transient response
Design tools & simulation
Features
- Leverages Cadence PSpice Technology
- Preinstalled library with a suite of digital models to enable worst-case timing analysis
- Dynamic updates ensure you have access to most current device models
- Optimized for simulation speed without loss of accuracy
- Supports simultaneous analysis of multiple products
- (...)
Reference designs
Design files
CAD/CAE symbols
| Package | Pins | Download |
|---|---|---|
| SO PowerPAD (DDA) | 8 | View options |
Ordering & quality
- RoHS
- REACH
- Device marking
- Lead finish/Ball material
- MSL rating/Peak reflow
- MTBF/FIT estimates
- Material content
- Qualification summary
- Ongoing reliability monitoring
Recommended products may have parameters, evaluation modules or reference designs related to this TI product.
Support & training
TI E2E™ forums with technical support from TI engineers
Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.
If you have questions about quality, packaging or ordering TI products, see TI support.