Home Power management AC/DC & DC/DC converters (integrated FET)
Home
Power management
AC/DC & DC/DC converters (integrated FET)

TPS55289

ACTIVE

30-V 8-A buck-boost converter with I²C interface

Order now
Data sheet

TPS55289

ACTIVE
Data sheet Order now

Product details

Iout (max) (A) 5 Vin (min) (V) 3 Vin (max) (V) 30 Topology Buck-Boost Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C interface, Light Load Efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous Rectification, USB C/PD compatible, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 22 Rating Catalog Operating temperature range (°C) -40 to 125
Iout (max) (A) 5 Vin (min) (V) 3 Vin (max) (V) 30 Topology Buck-Boost Type Converter Switching frequency (min) (kHz) 200 Switching frequency (max) (kHz) 2200 Features Adjustable current limit, Dynamic Voltage Scaling, Enable, Frequency synchronization, I2C interface, Light Load Efficiency, Load Disconnect, Output discharge, Spread Spectrum, Synchronous Rectification, USB C/PD compatible, UVLO adjustable Vout (min) (V) 0.8 Vout (max) (V) 22 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN-HR (RYQ) 21 15 mm² 5 x 3
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • 3.0-V to 30-V wide input voltage range
    • 0.8-V to 22-V with 10-mV step programmable output voltage range
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage droop over the cable
    • Programmable output current limit up to 6.35 A with 50-mA step
    • ±5% accurate output current monitoring
    • I2C interface
  • High efficiency over entire load range
    • 96% efficiency at VIN = 12 V, VOUT = 20 V, and IOUT = 3 A
    • Programmable PFM and FPWM mode at light load
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • 8-A average inductor current limit
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 3.0-mm × 5.0-mm HotRod™ QFN package
  • Programmable power supply (PPS) support for USB power delivery (USB PD)
    • 3.0-V to 30-V wide input voltage range
    • 0.8-V to 22-V with 10-mV step programmable output voltage range
    • ±1% reference voltage accuracy
    • Adjustable output voltage compensation for voltage droop over the cable
    • Programmable output current limit up to 6.35 A with 50-mA step
    • ±5% accurate output current monitoring
    • I2C interface
  • High efficiency over entire load range
    • 96% efficiency at VIN = 12 V, VOUT = 20 V, and IOUT = 3 A
    • Programmable PFM and FPWM mode at light load
  • Avoid frequency interference and crosstalk
    • Optional clock synchronization
    • Programmable switching frequency from 200 kHz to 2.2 MHz
  • EMI mitigation
    • Optional programmable spread spectrum
    • Lead-less package
  • Rich protection features
    • Output overvoltage protection
    • Hiccup mode for output short-circuit protection
    • Thermal shutdown protection
    • 8-A average inductor current limit
  • Small solution size
    • Maximum switching frequency up to 2.2 MHz
    • 3.0-mm × 5.0-mm HotRod™ QFN package

The TPS55289 is a synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS55289 integrates four MOSFET switches, providing a compact solution for USB power delivery (USB PD) application.

The TPS55289 has up to 30-V input voltage capability. Through the I2C interface, the output voltage of the TPS55289 can be programmed from 0.8 V to 22 V with 10-mV step. When working in boost mode, the device can deliver 60 W from 12-V input voltage. It is capable of delivering 45 W from 9-V input voltage.

The TPS55289 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS55289 also provides optional spread spectrum to minimize peak EMI.

The TPS55289 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS55289 also makes sure it safely operates with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55289 can use a small inductor and small capacitors with high switching frequency. It is available in a 3.0-mm × 5.0-mm QFN package.

The TPS55289 is a synchronous buck-boost converter that is optimized for converting battery voltage or adapter voltage into power supply rails. The TPS55289 integrates four MOSFET switches, providing a compact solution for USB power delivery (USB PD) application.

The TPS55289 has up to 30-V input voltage capability. Through the I2C interface, the output voltage of the TPS55289 can be programmed from 0.8 V to 22 V with 10-mV step. When working in boost mode, the device can deliver 60 W from 12-V input voltage. It is capable of delivering 45 W from 9-V input voltage.

The TPS55289 employs an average current-mode control scheme. The switching frequency is programmable from 200 kHz to 2.2 MHz by an external resistor and can be synchronized to an external clock. The TPS55289 also provides optional spread spectrum to minimize peak EMI.

The TPS55289 offers output overvoltage protection, average inductor current limit, cycle-by-cycle peak current limit, and output short circuit protection. The TPS55289 also makes sure it safely operates with optional output current limit and hiccup-mode protection in sustained overload conditions.

The TPS55289 can use a small inductor and small capacitors with high switching frequency. It is available in a 3.0-mm × 5.0-mm QFN package.
open-in-new Find other AC/DC & DC/DC converters (integrated FET)
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
NEW TPS552872 ACTIVE 36-V, 4-A fully integrated buck-boost converter 36-V, 4-A full integrated buck-boost converter

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet TPS55289 30-V, 8-A Buck-Boost Converter with I2C Interface datasheet (Rev. A) PDF | HTML 31 Aug 2022
User guide TPS55289 Buck-Boost Converter Evaluation Module User's Guide PDF | HTML 23 Mar 2022
Certificate TPS55289EVM EU RoHS Declaration of Conformity (DoC) 15 Mar 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS55289EVM — TPS55289 evaluation module for 36-V, 8-A/4-A, I²C fully integrated buck-boost converter

The TPS55289 is a synchronous buck-boost converter that is optimized for converting battery voltage or adaptor voltage into power supply rails. The TPS55289 integrates four MOSFET switches providing a compact solution for USB Power Delivery (USB PD) application.

User guide: PDF | HTML
Not available on TI.com
Simulation model

TPS55289 Encrypted PSpice Model

SLVMDY0.ZIP (213 KB) - PSpice Model
Download
Calculation tool

TPS55289-CALCULATION-TOOL — Calculation tool for TPS55289

This calculation tool is for buck-boost converter TPS55289
Supported products & hardware

Supported products & hardware

Products
AC/DC & DC/DC converters (integrated FET)
TPS55289 — 30-V 8-A buck-boost converter with I²C interface
Download
Package Pins Download
VQFN-HR (RYQ) 21 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos