Home Power management DC/DC switching regulators Step-down (buck) regulators Buck converters (integrated switch)
Home
Power management
DC/DC switching regulators
Step-down (buck) regulators
Buck converters (integrated switch)

TPS562202

ACTIVE

4.3-V to 17-V input, 2-A output, synchronous step-down voltage converter

Order now
Data sheet

TPS562202

ACTIVE
Data sheet Order now

Product details

Vin (min) (V) 4.3 Vin (max) (V) 17 Vout (min) (V) 0.804 Vout (max) (V) 7 Iout (max) (A) 2 Iq (typ) (mA) 0.38 Switching frequency (min) (kHz) 580 Switching frequency (max) (kHz) 580 Features Enable, Light Load Efficiency, Soft Start Fixed Operating temperature range (°C) -40 to 150 Rating Catalog Regulated outputs (#) 1 Control mode D-CAP2 Duty cycle (max) (%) 80 Type Converter
Vin (min) (V) 4.3 Vin (max) (V) 17 Vout (min) (V) 0.804 Vout (max) (V) 7 Iout (max) (A) 2 Iq (typ) (mA) 0.38 Switching frequency (min) (kHz) 580 Switching frequency (max) (kHz) 580 Features Enable, Light Load Efficiency, Soft Start Fixed Operating temperature range (°C) -40 to 150 Rating Catalog Regulated outputs (#) 1 Control mode D-CAP2 Duty cycle (max) (%) 80 Type Converter
SOT-5X3 (DRL) 6 2.56 mm² 1.6 x 1.6
  • 2-A converter with integrated 140-mΩ and 84-mΩ FETs
  • D-CAP2™ mode control with fast transient response
  • Input voltage range: 4.3 V to 17 V
  • Output voltage range: 0.804 V to 7 V
  • ECO mode at light loading
  • 580-kHz switching frequency
  • Low shutdown current of less than 3 µA
  • 2% feedback voltage accuracy (25°C)
  • Support pre-bias start-up
  • Cycle-by-cycle overcurrent limit
  • Hiccup-mode overcurrent protection
  • Non-latch UVP and TSD protections
  • Fixed soft start: 1.2 ms
  • 2-A converter with integrated 140-mΩ and 84-mΩ FETs
  • D-CAP2™ mode control with fast transient response
  • Input voltage range: 4.3 V to 17 V
  • Output voltage range: 0.804 V to 7 V
  • ECO mode at light loading
  • 580-kHz switching frequency
  • Low shutdown current of less than 3 µA
  • 2% feedback voltage accuracy (25°C)
  • Support pre-bias start-up
  • Cycle-by-cycle overcurrent limit
  • Hiccup-mode overcurrent protection
  • Non-latch UVP and TSD protections
  • Fixed soft start: 1.2 ms

The TPS562202 is a simple, easy-to-use, 2-A synchronous buck converter in a SOT563 package.

The device is optimized to operate with minimum external components and also optimized to achieve low standby current.

This switch mode power supply (SMPS) device employs D-CAP2 mode control providing a fast transient response and supporting both low-equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.

The TPS562202 operates in ECO mode, which maintains high efficiency during light load operation. The TPS562202 is available in a 6-pin 1.6-mm × 1.6-mm SOT563 (DRL) package, and specified from a –40°C to 125°C junction temperature.

The TPS562202 is a simple, easy-to-use, 2-A synchronous buck converter in a SOT563 package.

The device is optimized to operate with minimum external components and also optimized to achieve low standby current.

This switch mode power supply (SMPS) device employs D-CAP2 mode control providing a fast transient response and supporting both low-equivalent series resistance (ESR) output capacitors such as specialty polymer and ultra-low ESR ceramic capacitors with no external compensation components.

The TPS562202 operates in ECO mode, which maintains high efficiency during light load operation. The TPS562202 is available in a 6-pin 1.6-mm × 1.6-mm SOT563 (DRL) package, and specified from a –40°C to 125°C junction temperature.
open-in-new Find other Buck converters (integrated switch)
Download View video with transcript Video

Similar products you might be interested in

open-in-new Compare alternates
Drop-in replacement with upgraded functionality to the compared device
TPS562207 ACTIVE 4.3-V to 17-V input, 2-A synchronous buck converter in SOT563 Pin-compatible alternative with 2-A output current and FCCM mode.
TPS563207 ACTIVE 4.3-V to 17-V input, 3-A synchronous buck converter in SOT563 Pin-compatible alternative with 3-A output current and FCCM mode.
Pin-for-pin with same functionality to the compared device
TPS562202S ACTIVE 4.3-V to 17-V input, 2-A, ECO mode synchronous buck converter in SOT563 package Pin-to-pin upgrade with higher accuracy.
Same functionality with different pin-out to the compared device
TPS562211 ACTIVE 4.2-V to 18-V, 2-A, synchronous buck converter with 1% accuracy, PG/SS and PFM/forced-PWM in SOT583 This product has soft-start and power-good operations.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 6
Type Title Date
* Data sheet TPS562202 4.3-V to 17-V Input, 2-A Synchronous Buck Converter in SOT563 datasheet PDF | HTML 18 Sep 2020
Application note How to do Co-Layout Among Three Types of SOT-563 Packages PDF | HTML 05 Jan 2023
Application note How to Understand LC Table and Select LC About TPS563202 PDF | HTML 17 May 2021
EVM User's guide TPS562202 Step-Down Converter Evaluation Module User's Guide (Rev. A) PDF | HTML 27 Apr 2021
Certificate TPS562202EVM EU Declaration of Conformity (DoC) 14 May 2020
Technical article Minimize the impact of the MLCC shortage on your power application 29 Mar 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS562202EVM — 4.5-V to 17-V, 2-A synchronous step down converter evaluation module

TPS562202 is a simple, easy-to-use, 2-A synchronous step-down converter with Eco-Mode in SOT563-6 package. The TPS562202EVM evaluation module (EVM) is a fully assembled and tested circuit for evaluating the TPS562202 step-down converter. The TPS562202EVM operates from 4.5-V to 17-V input (12-V (...)
User guide: PDF | HTML
Not available on TI.com
Simulation model

TPS562202 PSpice Transient Model

SLUM759.ZIP (473 KB) - PSpice Model
Download
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Request
Reference designs

TIDA-010231 — Analog front end for arc detection in photovoltaic applications reference design

This reference design implements a four-channel analog front end for DC arc detection in photovoltaic systems, supports DC voltages up tp 1000 V and currents up to 10 A. Arcing is detected by analyzing the AC noise present on the DC current between the solar panels and inverter. The signal is (...)
Design guide: PDF
Package Pins Download
SOT-5X3 (DRL) 6 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos