The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.
With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.
The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.
The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.
The TPS6226x operates over a free air temperature range of 40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.
All other trademarks are the property of their respective owners
|Vin (Min) (V)|
|Vin (Max) (V)|
|Vout (Min) (V)|
|Vout (Max) (V)|
|Iout (Max) (A)|
|Regulated outputs (#)|
|Switching Frequency (Min) (kHz)|
|Switching Frequency (Max) (kHz)|
|Iq (Typ) (mA)|
|Duty cycle (Max) (%)|
|Operating temperature range (C)|
|Package size: mm2:W x L (PKG)|
Light Load Efficiency
|-40 to 85|
SOT-23-THIN | 5
WSON | 6
5SOT-23-THIN: 8 mm2: 2.8 x 2.9 (SOT-23-THIN | 5)
See datasheet (WSON)