TPS62262

ACTIVE

2.25MHz 600mA Step-Down Converter in 2x2mm SON/TSOT23 Package

Top

Product details

Parameters

Vin (Min) (V) 2 Vin (Max) (V) 6 Vout (Min) (V) 1.2 Vout (Max) (V) 1.2 Iout (Max) (A) 0.6 Iq (Typ) (uA) 15 Switching frequency (Min) (kHz) 2000 Switching frequency (Max) (kHz) 2500 Features Enable, Forced PWM, Light Load Efficiency, Synchronous Rectification Operating temperature range (C) -40 to 85 Rating Catalog Regulated outputs (#) 1 open-in-new Find other Buck converters (integrated switch)

Package | Pins | Size

SOT-23-THN (DDC) 5 8 mm² 2.9 x 2.8 WSON (DRV) 6 4 mm² 2 x 2 open-in-new Find other Buck converters (integrated switch)

Features

  • High Efficiency Step-Down Converter
  • Output Current up to 600 mA
  • VIN Range from 2 V to 6 V for Li-ion Batteries with
    Extended Voltage Range
  • 2.25-MHz Fixed Frequency Operation
  • Power Save Mode at Light Load Currents
  • Output Voltage Accuracy in PWM Mode ±1.5%
  • Typical 15-µA Quiescent Current
  • 100% Duty Cycle for Lowest Dropout
  • Voltage Positioning at Light Loads
  • Available in a SOT (5) and 2-mm × 2-mm × 0.8-
    mm WSON (6) Package
  • Allows <1-mm Solution Height
  • APPLICATIONS
    • Mobile Phones, Smart Phones
    • Low Power DSP Supply
    • Portable Media Players
    • Point-of-Load (POL) Applications

All other trademarks are the property of their respective owners

open-in-new Find other Buck converters (integrated switch)

Description

The TPS6226x device is a highly efficient synchronous step-down DC/DC converter. The TPS6226x provides up to 600-mA output current from a single Li-Ion cell, and is ideal for battery-powered applications such as mobile phones and other portable equipment.

With an wide input voltage range of 2 V to 6 V, the device also supports two- and three-cell alkaline batteries, 3.3-V and 5-V input voltage rails.

The TPS6226x operates at 2.25-MHz fixed-switching frequency, and enters power save mode operation at light load currents to maintain high efficiency over the entire load current range.

The power save mode is optimized for low-output voltage ripple. For low noise applications, the device can be forced into fixed frequency pulse-width modulation (PWM) mode by pulling the MODE pin high. In the shutdown mode, the current consumption is reduced to less than 1 µA. The TPS6226x allows the use of small inductors and capacitors to achieve a small solution size.

The TPS6226x operates over a free air temperature range of –40°C to 85°C. It is available in a 5-pin SOT and a 6-pin 2-mm × 2-mm WSON package.

open-in-new Find other Buck converters (integrated switch)
Download

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description

The TPS62260EVM-229 facilitates evaluation of the TPS62260 2.25 MHz, 600 mA step-down converter in 2x2SON/TSOT-23 package.

Features
  • High Efficiency Step Down Converter
  • Output Current up to 600 mA
  • Wide VIN Range from 2.0 V to 6 V for Li-Ion Batteries with Extended Voltage Range
  • 2.25 MHz Fixed Frequency Operation
  • Power Save Mode at Light Load Currents
  • Output Voltage Accuracy in PWM mode ±1%
  • Typ. 15 mA Quiescent Current
  • 100% Duty Cycle for (...)

Design tools & simulation

SIMULATION MODEL Download
SLIM050A.ZIP (36 KB) - PSpice Model
SIMULATION MODEL Download
SLVM256.TSC (118 KB) - TINA-TI Reference Design
SIMULATION MODEL Download
SLVM257.ZIP (26 KB) - TINA-TI Spice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
GERBER FILE Download
SLVC134.ZIP (106 KB)

Reference designs

REFERENCE DESIGNS Download
Microcontroller supply
PMP5610 — Simple, low power, dual output supply w/ TPS54060 to supply low power DSPs, ASICs or similar outputs from wide input voltage range.
Design files

CAD/CAE symbols

Package Pins Download
SOT-23-THIN (DDC) 5 View options
WSON (DRV) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos