TPS62822

ACTIVE

2.4V-5.5V input, 2A step-down converter With 1% Accuracy in 1.5x2mm QFN

Top

Product details

Parameters

Vin (Min) (V) 2.4 Vin (Max) (V) 5.5 Vout (Min) (V) 0.6 Vout (Max) (V) 4 Iout (Max) (A) 2 Iq (Typ) (mA) 0.004 Switching frequency (Min) (kHz) 2200 Switching frequency (Max) (kHz) 2200 Features Enable, Light Load Efficiency, Output Discharge, Over Current Protection, Power Good, Pre-Bias Start-Up, Synchronous Rectification Operating temperature range (C) -40 to 125 Rating Catalog Regulated outputs (#) 1 open-in-new Find other Buck converters (integrated switch)

Package | Pins | Size

VSON-HR (DLC) 8 3 mm² 1.5 x 2 open-in-new Find other Buck converters (integrated switch)

Features

  • DCS-Control™ topology
  • 26-mΩ/25-mΩ internal power switches (TPS62823)
  • Up to 3-A output current (TPS62823)
  • Very low quiescent current of 4 µA
  • Switching frequency of typically 2.2 MHz
  • 1% feedback voltage accuracy (full temp. range)
  • Enable (EN) and power good (PG)
  • Adjustable output voltage from 0.6 V to 4 V
  • 100% duty-cycle mode
  • Internal soft-start circuitry
  • Seamless power save mode transition
  • Undervoltage lockout
  • Active output discharge
  • Cycle-by-cycle current limit
  • HICCUP short-circuit protection
  • Over temperature protection
  • CISPR11 class B compliant
  • Create a custom design using the TPS62822 with the WEBENCH® Power Designer

All trademarks are the property of their respective owners.

open-in-new Find other Buck converters (integrated switch)

Description

The TPS6282x is an all-purpose and easy to use synchronous step-down DC-DC converter with a very low quiescent current of only 4 µA. It supplies up to 3A output current (TPS62823) from a 2.4-V to 5.5-V input voltage. Based on the DCS-Control™ topology it provides a fast transient response.

The internal reference allows to regulate the output voltage down to 0.6 V with a high feedback voltage accuracy of 1% over the junction temperature range of -40°C to 125°C. The 1-A, 2-A, 3-A scalable pin-to-pin and BOM-to-BOM compatible device family can be used with small 470-nH inductors.

The TPS6282x include an automatically entered power save mode to maintain high efficiency down to very light loads.

The device features a Power Good signal and an internal soft start circuit. It is able to operate in 100% mode. For fault protection, it incorporates a HICCUP current limit as well as a thermal shutdown.

The TPS6282x are packaged in a 2 mm x 1.5 mm QFN-8 package.

open-in-new Find other Buck converters (integrated switch)
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 23
Type Title Date
* Datasheet TPS6282x 5.5-V, 1-A, 2-A, 3-A Step-Down Converter Family with 1% Accuracy datasheet (Rev. C) Nov. 25, 2019
Selection guides Buck Converter Quick Reference Guide (Rev. A) Mar. 31, 2020
Application notes Methods of output-voltage adjustment for DC/DC converters Jun. 14, 2019
Technical articles Minimize the impact of the MLCC shortage on your power application Mar. 29, 2019
Application notes Performing Accurate PFM Mode Efficiency Measurements (Rev. A) Dec. 11, 2018
Technical articles QFN soldering tips and tricks Nov. 26, 2018
Application notes Step-Dwn (Buck) Convrtr Pwer Solutions for Programmable Logic Controller Systems Sep. 10, 2018
Application notes QFN and SON PCB Attachment (Rev. B) Aug. 24, 2018
Application notes Solve Point-of-Load Power Design Challenges: Single Board Computer Applications Aug. 24, 2018
Application notes Understanding 100% mode in low-power DC/DC converters Jun. 22, 2018
Technical articles Output accuracy varies with temperature – 1% is not always 1% May 02, 2018
User guides TPS6282xEVM-005 Evaluation Module Nov. 03, 2017
Application notes Achieving a clean startup by using a DC/DC converter with a precise enable-pin t Oct. 24, 2017
Application notes Testing tips for applying external power to supply outputs without an input volt Oct. 24, 2016
Application notes Understanding frequency variation in the DCS-Control(TM) topology Oct. 30, 2015
Application notes Basic Calculation of a Buck Converter's Power Stage (Rev. B) Aug. 17, 2015
Application notes Five steps to a great PCB layout for a step-down converter Jan. 29, 2015
Application notes Accurately measuring efficiency of ultralow-IQ devices Jan. 22, 2014
Application notes High-efficiency, low-ripple DCS-Control offers seamless PWM/pwr-save transitions Jul. 25, 2013
Application notes Design considerations for a resistive feedback divider in a DC/DC converter Apr. 26, 2012
Application notes Understanding the Absolute Maximum Ratings of the SW Node (Rev. A) Jan. 13, 2012
Application notes Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs Sep. 19, 2011
Application notes IQ: What it is, what it isn’t, and how to use it Jun. 17, 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
$49.00
Description
The TPS62822EVM-005 evaluation module (EVM) facilitates the evaluation of the TPS62822 2-A, step-down converter with DCS-Control in a 2-mm by 1.5-mm QFN package. The EVM outputs a 1.8-V output voltage with 1% accuracy from input voltages between 2.4V and 5.5V with a maximum solution height of 1 (...)
Features
  • 2.4V to 5.5V Input Voltage Range
  • 1.8V Output Voltage with 1% accuracy
  • 2A of Output Current
  • 1mm Maximum Solution Height
  • 36 mm2 Total Solution Size
  • Pin-to-pin 1A, 2A, 3A Devices (TPS62821/2/3)

Design tools & simulation

SIMULATION MODELS Download
SLVMCJ8A.ZIP (475 KB) - PSpice Model
GERBER FILES Download
SLUC643.ZIP (304 KB)
GERBER FILES Download
SLVC780.ZIP (138 KB)

Reference designs

REFERENCE DESIGNS Download
VBus protection with eFuse for solid state drive modules reference design
TIDA-050028 — This reference design provides the front end protection of a SSD module and showcases the fully featured power tree for standard 3.3-V, 1.8-V, and 1.5-V rails. This size optimized design helps customers with appropriate selection of the integrated circuit protection device, load switches, and DC/DCs (...)
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
High efficiency power supply architecture reference design for protection relay processor module
TIDA-010011 — This reference design showcases various power architectures for generating multiple voltage rails for an application processor module, requiring >1A load current and high efficiency . The required power supply is generated using 5-, 12- or 24-V DC input from the backplane. Power supplies are (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
VSON-HR (DLC) 8 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos