TPS63060

ACTIVE

2.5V to 12V input voltage, 93% Efficient, 2.25A Switch Current Limit, Buck-Boost Converter

Top

Product details

Parameters

Topology Buck-Boost Vin (Min) (V) 2.5 Vin (Max) (V) 12 Vout (Max) (V) 8 Vout (Min) (V) 2.5 Duty cycle (Max) (%) 100 Features Enable, Frequency Synchronization, Light Load Efficiency, Load Disconnect, Power Good, Synchronous Rectification, UVLO Fixed Switch current limit (Typ) (A) 2.25 Switching frequency (Min) (kHz) 2200 Switching frequency (Max) (kHz) 2600 Iq (Typ) (mA) 0.03 Rating Catalog Iout (Max) (A) 1.3 Operating temperature range (C) -40 to 85 open-in-new Find other Buck-boost, inverting & split-rail converters (integrated switch)

Package | Pins | Size

WSON (DSC) 10 9 mm² 3 x 3 open-in-new Find other Buck-boost, inverting & split-rail converters (integrated switch)

Features

  • Input Voltage Range: 2.5 V to 12 V
  • Efficiency: Up to 93%
  • Output Current at 5 V (VIN<10 V): 2 A in Buck Mode
  • Output Current at 5 V (VIN>4 V): 1.3 A in Boost Mode
  • Automatic Transition Between Step Down and Boost Mode
  • Typical Device Quiescent Current: < 30 μA
  • Fixed and Adjustable Output Voltage Options from 2.5 V to 8 V
  • Power-Save Mode for Improved Efficiency at Low Output Power
  • Forced Fixed-Frequency Operation at 2.4 MHz and Synchronization Possible
  • Power Good Output
  • Buck-Boost Overlap Control
  • Load Disconnect During Shutdown
  • Overtemperature Protection
  • Overvoltage Protection
open-in-new Find other Buck-boost, inverting & split-rail converters (integrated switch)

Description

The TPS6306x devices provide a power supply solution for products powered by either three-cell up to six-cell alkaline, NiCd or NiMH battery, or a one-cell or dual-cell Li-Ion or Li-polymer battery. Output currents can go as high as 2-A while using a dual-cell Li-Ion or Li-polymer battery, and discharge it down to 5 V or lower. The buck-boost converter is based on a fixed frequency, pulse-width-modulation (PWM) controller using synchronous rectification to obtain maximum efficiency. At low load currents, the converter enters power-save mode to maintain high efficiency over a wide load current range. The power-save mode can be disabled, forcing the converter to operate at a fixed switching frequency. The maximum average current in the switches is limited to a typical value of 2.25 A. The output voltage is programmable using an external resistor divider, or is fixed internally on the chip. The converter can be disabled to minimize battery drain. During shutdown, the load is disconnected from the battery.

The devices are available in a 3 mm × 3 mm, 10-pin, WSON (DSC), PowerPAD package.

For all available packages, see the orderable addendum at the end of
open-in-new Find other Buck-boost, inverting & split-rail converters (integrated switch)
Download
Similar products you might be interested in
open-in-new Compare products
Similar but not functionally equivalent to the compared device:
TPS63000 ACTIVE High efficiency Buck-Boost Converter with 1.8A Current Switches in 3x3 QFN 1.8-V to 5.5-V input voltage range (1.8-A switch).
TPS63020 ACTIVE High Efficiency Single Inductor Buck-Boost Converter with 4A Switch 1.8-V to 5.5-V input voltage range (4-A switch).
TPS63070 ACTIVE Wide input voltage (2V-16V) buck-boost converter 2-V to 16-V input voltage range (3.6-A-switch).

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 22
Type Title Date
* Datasheet TPS6306x High Input Voltage, Buck-Boost Converter With 2-A Switch Current datasheet (Rev. B) Dec. 14, 2014
Application notes A Topical Index of TI Low-Power Buck-Boost Converter Application Notes May 11, 2020
Application notes Layer Design for Reducing Radiated EMI of DC to DC Buck-Boost Converters Apr. 22, 2020
Application notes Improving Load Transient Response for Controlled Loads Sep. 12, 2019
Application notes Different Methods to Drive LEDs Using TPS63XXX Buck-Boost Converters (Rev. C) Jul. 03, 2019
Application notes Performing Accurate PFM Mode Efficiency Measurements (Rev. A) Dec. 11, 2018
Application notes Understanding Undervoltage Lockout in Power Devices (Rev. A) Sep. 19, 2018
Application notes QFN and SON PCB Attachment (Rev. B) Aug. 24, 2018
Application notes Basic Calculations of a 4 Switch Buck-Boost Power Stage (Rev. B) Jul. 09, 2018
Selection guides Power Management Guide 2018 (Rev. R) Jun. 25, 2018
Technical articles Learn how to keep your car battery steady and running longer Mar. 28, 2017
Technical articles Providing an orderly shutdown of PLCs May 14, 2015
Technical articles Easy SSD backup power Apr. 11, 2015
Application notes High-Efficiency Backup Power Supply Dec. 11, 2014
Technical articles DIY with TI: Staying on track with model train hobby Dec. 09, 2014
Application notes Extending the Soft Start Time in the TPS63010 Buck-Boost Converter Dec. 05, 2012
Application notes Design considerations for a resistive feedback divider in a DC/DC converter Apr. 26, 2012
User guides TPS63060EVM-619 Jan. 19, 2012
Application notes Choosing an Appropriate Pull-up/Pull-down Resistor for Open Drain Outputs Sep. 19, 2011
Application notes IQ: What it is, what it isn’t, and how to use it Jun. 17, 2011
Application notes Minimizing Ringing at the Switch Node of a Boost Converter Sep. 15, 2006
Application notes Dynamically Adjustable Output Using the TPS63000 Aug. 15, 2006

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
49
Description

The Texas Instruments TPS63060EVM-619 evaluation module is designed to help the user easily evaluate and test the operation and functionality of the TPS63060. The TPS63060EVM-619 uses the TPS63060 adjustable version and is set to 5-V output. The EVM operates with full-rated performance with an input (...)

Features
  • Up to 93% Efficiency
  • 2A/1A Output Current at 5V in Step Down Mode
  • 1.3A Output Current at 5V in Boost Mode (VIN>4V)
  • Automatic Transition Between Step Down and Boost Mode
  • Typical Device Quiescent Current less than 60μA
  • Input Voltage Range: 2.5V to 12V
  • Fixed and Adjustable Output Voltage Options from 2.5V to (...)

Design tools & simulation

SIMULATION MODELS Download
SLVM477A.ZIP (39 KB) - PSpice Model
SIMULATION MODELS Download
SLVM556.ZIP (44 KB) - TINA-TI Spice Model
SIMULATION MODELS Download
SLVM557.TSC (145 KB) - TINA-TI Reference Design
SIMULATION TOOLS Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)
CALCULATION TOOLS Download
SLVC808.ZIP (2169 KB)
GERBER FILES Download
SLVC409.ZIP (378 KB)

Reference designs

REFERENCE DESIGNS Download
50-Ohm 2-GHz Oscilloscope Front-end Reference Design
TIDA-00826 This reference design is part of an analog front-end for 50Ω-input oscilloscope application. System designers can readily use this evaluation platform to process input signals from DC to 2 GHz in both frequency-domain and time-domain applications.
document-generic Schematic document-generic User guide
REFERENCE DESIGNS Download
High-Efficiency Backup Power Supply Reference Design
PMP9761 This reference design describes a backup power circuit which addresses instantaneous protection against power interruptions by using a buck-boost converter and a backup capacitor. The implementation is based on a completely integrated TPS63060 buck-boost converter circuit enabling a small total (...)
document-generic Schematic

CAD/CAE symbols

Package Pins Download
WSON (DSC) 10 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos