Top

Product details

Parameters

Output options Adjustable Output, Fixed Output Iout (Max) (A) 0.25 Vin (Max) (V) 5.5 Vin (Min) (V) 1.7 Vout (Max) (V) 5.4 Vout (Min) (V) 1.2 Fixed output options (V) 1.8, 5 Noise (uVrms) 30 Iq (Typ) (mA) 0.4 Thermal resistance θJA (°C/W) 48 TI functional safety category Functional Safety-Capable Load capacitance (Min) (µF) 0 Rating Automotive Regulated outputs (#) 1 Features Enable, Foldback Overcurrent Protection, Reverse Current Protection Accuracy (%) 1 PSRR @ 100 KHz (dB) 16 Dropout voltage (Vdo) (Typ) (mV) 40 Operating temperature range (C) -40 to 125 open-in-new Find other Linear regulators (LDO)

Package | Pins | Size

SOT-223 (DCQ) 6 46 mm² 6.5 x 7.06 SOT-23 (DBV) 5 5 mm² 2.9 x 1.6 VSON (DRB) 8 9 mm² 3.0 x 3.0 open-in-new Find other Linear regulators (LDO)

Features

  • Qualified for Automotive Applications
  • AEC-Q100 Qualified With the Following Results
    • Device Temperature Grade 0: –40°C to 150°C
      Ambient Operating Temperature Range
    • Device HBM Classification Level 2
    • Device CDM Classification Level C4B
    • Device MM Classification Level M2
  • Stable With No Output Capacitor or Any Value or
    Type of Capacitor
  • Input Voltage Range: 1.7 V to 5.5 V
  • Ultra-Low Dropout Voltage: 40-mV Typical at
    250 mA
  • Excellent Load Transient Response—With or
    Without Optional Output Capacitor
  • New NMOS Topology Provides Low Reverse
    Leakage Current
  • Low Noise: 30-µVRMS Typical (10 kHz to 100 kHz)
  • 0.5% Initial Accuracy
  • 1% Overall Accuracy (Line, Load, and
    Temperature)
  • Less Than 1-µA Maximum IQ in Shutdown Mode
  • Thermal Shutdown and Specified Minimum and
    Maximum Current Limit Protection
  • Available in Multiple Output Voltage Versions
    • Fixed Outputs of 1.2 V, 1.5 V, 1.6 V, 1.8 V,
      2.5 V, 3 V, 3.3 V, and 5 V
    • Adjustable Outputs From 1.2 V to 5.5 V
    • Custom Outputs Available
open-in-new Find other Linear regulators (LDO)

Description

The TPS732-Q1 family of low-dropout (LDO) voltage regulators uses a new topology: an NMOS pass element in a voltage-follower configuration. This topology is stable using output capacitors with low ESR, and even allows operation without a capacitor. The topology also provides high reverse blockage (low reverse current) and ground pin current that is nearly constant over all values of output current.

The TPS732-Q1 family of devices uses an advanced BiCMOS process to yield high precision while delivering low dropout voltages and low ground pin current. Current consumption, when not enabled, is under 1 µA and ideal for portable applications. The extremely low output noise (30 µVRMS with 0.1-µF CNR) is ideal for powering VCOs. These devices are protected by thermal shutdown and foldback current limit.

open-in-new Find other Linear regulators (LDO)
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 12
Type Title Date
* Datasheet TPS732-Q1 Cap-Free NMOS 250-mA Low-Dropout Regulator With Reverse-Current Protection datasheet (Rev. F) Apr. 29, 2016
Application notes LDO Noise Demystified (Rev. B) Aug. 18, 2020
Application notes TPS732-Q1 Functional Safety FIT Rate and Failure Mode Distribution Dec. 17, 2019
Application notes Using Thermal Calculation Tools for Analog Components (Rev. A) Aug. 30, 2019
Technical articles LDO basics: capacitor vs. capacitance Aug. 01, 2018
Technical articles LDO Basics: Preventing reverse current Jul. 25, 2018
Technical articles LDO basics: introduction to quiescent current Jun. 20, 2018
Application notes LDO PSRR Measurement Simplified (Rev. A) Aug. 09, 2017
Technical articles LDO basics: noise – part 1 Jun. 14, 2017
User guides Universal Low-Dropout (LDO) Linear Voltage Regulator EVM User's Guide Oct. 12, 2016
User guides DEM-SOT223LDO Demonstration Fixture Oct. 15, 2003
More literature DMOS Delivers Dramatic Performance Gains to LDO Regulators (EDN mag) Feb. 14, 2001

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARDS Download
document-generic User guide
5
EVALUATION BOARDS Download
document-generic User guide
20
Description
The TPS73201DRBEVM-518 evaluation module is a fully assembled and tested circuit for evaluating the TPS73201 low-dropout (LDO) voltage regulator in the DRB (3x3mm SON) package.
Features
  • Stable with No Output Capacitor or Any Value or Type of Capacitor
  • Input Voltage Range: 1.7V to 5.5V
  • Ultra-low Dropout Voltage: 40mV Typ at 250mA
  • Excellent Load Transient Response, with or without Optional Output Capacitor
  • New NMOS Topology Provides Low Reverse Leakage Current
  • Low Noise: 30uVRMS Typ (...)

Design tools & simulation

SIMULATION MODELS Download
SBVM171A.ZIP (21 KB) - PSpice Model
SIMULATION MODELS Download
SBVM363.ZIP (21 KB) - PSpice Model
SIMULATION MODELS Download
SBVM365.ZIP (7 KB) - TINA-TI Spice Model
SIMULATION MODELS Download
SBVM366.TSC (49 KB) - TINA-TI Reference Design

CAD/CAE symbols

Package Pins Download
SON (DRB) 8 View options
SOT-223 (DCQ) 6 View options
SOT-23 (DBV) 5 View options

Ordering & quality

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos