Top

Product details

Parameters

Output options Adjustable Output Iout (Max) (A) 3 Vin (Max) (V) 5.5 Vin (Min) (V) 0.8 Vout (Max) (V) 3.6 Vout (Min) (V) 0.8 Noise (uVrms) 13 Iq (Typ) (mA) 3 Thermal resistance θJA (°C/W) 27 Approx. price (US$) 8.36 | 1ku Load capacitance (Min) (µF) 0 Rating HiRel Enhanced Product Regulated outputs (#) 1 Features Enable, Power Good, Soft Start Accuracy (%) 1 PSRR @ 100 KHz (dB) 50 Dropout voltage (Vdo) (Typ) (mV) 115 Operating temperature range (C) -55 to 125 open-in-new Find other Linear regulators (LDO)

Package | Pins | Size

VQFN (RGW) 20 25 mm² 5 x 5 open-in-new Find other Linear regulators (LDO)

Features

  • Soft-Start (SS) Pin Provides a Linear Startup with Ramp Time Set by External Capacitor
  • 1% Accuracy Over Line, Load, and Temperature
  • Supports Input Voltages as Low as 0.9 V with External Bias Supply
  • Adjustable Output (0.8 V to 3.6 V)
  • Ultra-Low Dropout: 115 mV at 3.0 A (typ)
  • Stable with Any or No Output Capacitor
  • Excellent Transient Response
  • Available in 5 mm × 5 mm × 1 mm QFN Package
  • Active High Enable
  • SUPPORTS DEFENSE, AEROSPACE, AND MEDICAL APPLICATIONS
    • Controlled Baseline
    • One Assembly/Test Site
    • One Fabrication Site
    • Available in Military (–55°C/125°C) Temperature Ranges(1)
    • Extended Product Life Cycle
    • Extended Product-Change Notification
    • Product Traceability
  • APPLICATIONS
    • FPGA Applications
    • DSP Core and I/O Voltages
    • Post-Regulation Applications
    • Applications with Special Start-Up Time or Sequencing Requirements
    • Hot-Swap and Inrush Controls

(1) Custom temperature ranges available
All other trademarks are the property of their respective owners

open-in-new Find other Linear regulators (LDO)

Description

The TPS74401 low-dropout (LDO) linear regulator provides an easy-to-use robust power management solution for a wide variety of applications. User-programmable soft-start minimizes stress on the input power source by reducing capacitive inrush current on start-up. The soft-start is monotonic and well-suited for powering many different types of processors and ASICs. The enable input and power-good output allow easy sequencing with external regulators. This complete flexibility permits the user to configure a solution that will meet the sequencing requirements of FPGAs, DSPs, and other applications with specific start-up requirements.

A precision reference and error amplifier deliver 1% accuracy over load, line, temperature, and process. Each LDO is stable with low-cost ceramic output capacitors and the device is fully specified from –55°C to 125°C.

open-in-new Find other Linear regulators (LDO)
Download

Technical documentation

= Featured
No results found. Please clear your search and try again. View all 7
Type Title Date
* Datasheet 3.0A Ultra-LDO With Programmable Soft-Start. datasheet (Rev. B) Sep. 08, 2010
Technical articles LDO basics: capacitor vs. capacitance Aug. 01, 2018
Technical articles LDO Basics: Preventing reverse current Jul. 25, 2018
Technical articles LDO basics: introduction to quiescent current Jun. 20, 2018
Technical articles LDO basics: noise – part 1 Jun. 14, 2017
VID TPS74401-EP VID V6210611 Jun. 21, 2016
Radiation & Reliability reports TPS74401MRGWTEP Reliability Report Oct. 26, 2011

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Reference designs

REFERENCE DESIGNS Download
Direct RF-Sampling Radar Receiver for L-, S-, C-, and X-Band Using ADC12DJ3200 Reference Design
TIDA-01442 The TIDA-01442 reference design utilizes the ADC12DJ3200 evaluation module (EVM) to demonstrate a direct RF-sampling receiver for a radar operating in HF, VHF, UHF, L-, S-, C-, and part of X-band. The wide analog input bandwidth and high sampling rate (6.4 GSPS) of the analog-to-digital (...)
document-generic Schematic document-generic User guide

CAD/CAE symbols

Package Pins Download
VQFN (RGW) 20 View options

Ordering & quality

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​