Packaging information
| Package | Pins CFP (HKR) | 16 |
| Operating temperature range (°C) 25 to 25 |
| Package qty | Carrier 1 | TUBE |
Features for the TPS7H2201-SP
- Radiation
performance:
- Radiation hardness assurance (RHA) up to TID 100 krad(Si)
- Single event latchup (SEL), single event burnout (SEB), and single event gate rupture (SEGR) immune to LET = 75 MeV-cm2/mg
- SEFI/SET characterized to
LET = 75 MeV-cm2/mg
- Integrated single channel load switch
- Input voltage range: 1.5 V to 7 V
- Low on-resistance (RON) of 35-mΩ maximum at 25°C and
VIN = 5 V
- 6-A maximum continuous switch current
- Low
control input threshold enables use of
1.2-, 1.8-, 2.5-, and 3.3-V logic - Configurable rise time (soft start)
- Reverse current protection
- Programmable and internal current limiting
(fast-trip) - Programmable fault timer (current limit
and
retry modes) - Thermal shutdown
- Ceramic package with thermal pad
Description for the TPS7H2201-SP
The TPS7H2201-SP is a single channel load switch that provides configurable rise time to minimize inrush current and reverse current protection. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.5 V to 7 V and can support a maximum continuous current of 6 A. The switch is controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals.
The TPS7H2201-SP is available in a ceramic package with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –55°C to 125°C.