Home Power management Power switches eFuses & hot swap controllers
Home
Power management
Power switches
eFuses & hot swap controllers

TPS7H2201-SP

ACTIVE

Radiation-hardened QMLV, 1.5-V to 7-V input, 6-A load switch/eFuse

Order now
Data sheet

TPS7H2201-SP

ACTIVE
Data sheet Order now

Product details

Product type eFuses and hot swap controllers Rating Space Operating temperature range (°C) -55 to 125, 25 to 25
Product type eFuses and hot swap controllers Rating Space Operating temperature range (°C) -55 to 125, 25 to 25
CFP (HKR) 16 105.6 mm² 11 x 9.6 DIESALE (KGD) — —
  • Radiation performance:
    • Radiation hardness assurance (RHA) up to TID 100 krad(Si)
    • Single event latchup (SEL), single event burnout (SEB), and single event gate rupture (SEGR) immune to LET = 75 MeV-cm2/mg
    • SEFI/SET characterized to
      LET = 75 MeV-cm2/mg
  • Integrated single channel load switch
  • Input voltage range: 1.5 V to 7 V
  • Low on-resistance (RON) of 35-mΩ maximum at 25°C and VIN = 5 V
    • 6-A maximum continuous switch current
    • Low control input threshold enables use of
      1.2-, 1.8-, 2.5-, and 3.3-V logic
    • Configurable rise time (soft start)
    • Reverse current protection
    • Programmable and internal current limiting
      (fast-trip)
    • Programmable fault timer (current limit and
      retry modes)
    • Thermal shutdown
    • Ceramic package with thermal pad
    • Radiation performance:
      • Radiation hardness assurance (RHA) up to TID 100 krad(Si)
      • Single event latchup (SEL), single event burnout (SEB), and single event gate rupture (SEGR) immune to LET = 75 MeV-cm2/mg
      • SEFI/SET characterized to
        LET = 75 MeV-cm2/mg
    • Integrated single channel load switch
    • Input voltage range: 1.5 V to 7 V
    • Low on-resistance (RON) of 35-mΩ maximum at 25°C and VIN = 5 V
      • 6-A maximum continuous switch current
      • Low control input threshold enables use of
        1.2-, 1.8-, 2.5-, and 3.3-V logic
      • Configurable rise time (soft start)
      • Reverse current protection
      • Programmable and internal current limiting
        (fast-trip)
      • Programmable fault timer (current limit and
        retry modes)
      • Thermal shutdown
      • Ceramic package with thermal pad

      The TPS7H2201-SP is a single channel load switch that provides configurable rise time to minimize inrush current and reverse current protection. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.5 V to 7 V and can support a maximum continuous current of 6 A. The switch is controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals.

      The TPS7H2201-SP is available in a ceramic package with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –55°C to 125°C.

      The TPS7H2201-SP is a single channel load switch that provides configurable rise time to minimize inrush current and reverse current protection. The device contains a P-channel MOSFET that can operate over an input voltage range of 1.5 V to 7 V and can support a maximum continuous current of 6 A. The switch is controlled by an on and off input (EN), which is capable of interfacing directly with low-voltage control signals.

      The TPS7H2201-SP is available in a ceramic package with integrated thermal pad allowing for high power dissipation. The device is characterized for operation over the free-air temperature range of –55°C to 125°C.
      open-in-new Find other eFuses & hot swap controllers
      Download View video with transcript Video

      Similar products you might be interested in

      open-in-new Compare products
      Similar functionality to the compared device.
      TPS7H2211-SP ACTIVE Radiation-hardened QMLV, 4.5-V to 14-V input, 3.5-A load switch/eFuse

      14-V, 3.5-A eFuse with same footprint as the TPS7H2201-SP

      Technical documentation

      star =Top documentation for this product selected by TI
      No results found. Please clear your search and try again.
      View all 16
      Type Title Date
      * Data sheet TPS7H2201-SP Radiation Hardened 1.5-V to 7-V, 6-A Load Switch datasheet (Rev. B) PDF | HTML 28 May 2019
      * SMD TPS7H2201-SP SMD 5962-17220 10 Aug 2020
      * Radiation & reliability report Single-Event Effects Test Report of the TPS7H2201-SP Load Switch (Rev. A) 03 Jun 2019
      * Radiation & reliability report TPS7H2201-SP Total Ionizing Dose (TID) Report (Rev. B) 17 Apr 2019
      * Radiation & reliability report TPS7H2201-SP Neutron Displacement Damage Characterization 25 Jan 2019
      Application note Heavy Ion Orbital Environment Single-Event Effects Estimations (Rev. A) PDF | HTML 17 Nov 2022
      Application note Single-Event Effects Confidence Interval Calculations (Rev. A) PDF | HTML 19 Oct 2022
      Selection guide TI Space Products (Rev. I) 03 Mar 2022
      Application note DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21 Aug 2020
      Technical article Simplifying radiation-hardened power-supply design with eFuses 14 Jul 2020
      Application note Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form PDF | HTML 18 May 2020
      Application note Failure Containment in Spacecraft Point-of-Load Power Supplies 30 Apr 2020
      Technical article 4 trends in space-grade power management 12 Feb 2020
      More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing 17 Jun 2019
      E-book Radiation Handbook for Electronics (Rev. A) 21 May 2019
      Technical article When failure isn’t an option: power up your next satellite with integrated functionality and protection 30 Apr 2019

      Design & development

      For additional terms or required resources, click any title below to view the detail page where available.

      Evaluation board

      TPS7H2201EVM-CVAL — TPS7H2201-SP evaluation module for 1.5-V to 7-V input, 6-A load switch and eFuse

      The TPS7H2201EVM-CVAL is the Evaluation Module (EVM) for the TPS7H2201-SP and provides a platform to electrically evaluate its features.

      The TPS7H2201-SP device is a single channel, 6-A load switch with a programmable slew rate for applications that require specific rise-time as well as programmable (...)

      User guide: PDF
      Not available on TI.com
      Simulation model

      TPS7H2201-SP PSpice Transient Model

      SLVMCY9.ZIP (214 KB) - PSpice Model
      Download
      Simulation model

      TPS7H2201-SP Unencrypted PSpice Transient Model (Rev. A)

      SLVMCY8A.ZIP (4 KB) - PSpice Model
      Download
      Simulation tool

      PSPICE-FOR-TI — PSpice® for TI design and simulation tool

      PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
      Request
      Reference designs

      TIDA-070001 — 3- to 7-VIN, Space-grade point-of-load (POL) reference design with redundant eFuse inputs for OCP

      Redundancy is often employed in spacecraft applications to enhance reliability, this reference design shows how redundancy can be implemented at the input of a Point-of-Load (POL) supply using two TPS7H2201-SP radiation hardened eFuse load switches. Using two load switches allows for a primary and (...)
      Design guide: PDF
      Schematic: PDF
      Package Pins Download
      CFP (HKR) 16 View options
      DIESALE (KGD) —

      Ordering & quality

      Information included:
      • RoHS
      • REACH
      • Device marking
      • Lead finish/Ball material
      • MSL rating/Peak reflow
      • MTBF/FIT estimates
      • Material content
      • Qualification summary
      • Ongoing reliability monitoring

      Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

      Support & training

      TI E2E™ forums with technical support from TI engineers

      View all forum topics

      Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

      If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

      Videos