Radiation-hardness-assured (RHA), 3-V to 5.5-V input, 3-A, synchronous step-down converter

TPS7H4002-SP

ACTIVE

Product details

Vin (Min) (V) 3 Vin (Max) (V) 5.5 Vout (Min) (V) 0.804 Vout (Max) (V) 5.3 Iout (Max) (A) 3 Iq (Typ) (uA) 2500 Switching frequency (Min) (kHz) 100 Switching frequency (Max) (kHz) 1000 Features Enable, Frequency Synchronization, Over Current Protection, Power Good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO Adjustable Operating temperature range (C) -55 to 125, 25 to 25 Rating Space Regulated outputs (#) 1
Vin (Min) (V) 3 Vin (Max) (V) 5.5 Vout (Min) (V) 0.804 Vout (Max) (V) 5.3 Iout (Max) (A) 3 Iq (Typ) (uA) 2500 Switching frequency (Min) (kHz) 100 Switching frequency (Max) (kHz) 1000 Features Enable, Frequency Synchronization, Over Current Protection, Power Good, Pre-Bias Start-Up, Soft Start Adjustable, Synchronous Rectification, Tracking, UVLO Adjustable Operating temperature range (C) -55 to 125, 25 to 25 Rating Space Regulated outputs (#) 1
CFP (HKH) 20 94 mm² 12.7 x 2.9
  • Radiation performance:
    • Radiation-hardness-assured up to TID 100 krad(Si)
    • SEL, SEB, and SEGR immune to LET = 75 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 75 MeV-cm2/mg
  • Peak efficiency: 96.9% (VO = 2.5 V)
  • Integrated 50-mΩ and 35-mΩ MOSFETs
  • Power rail: 3 to 5.5 V on VIN
  • 3-A maximum output current
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz adjustable internal oscillator
    • External sync capability: 100 kHz to 1 MHz
    • SYNC pin can be configured as a 500-kHz output for primary-secondary applications
  • 0.807-V ±1.5% voltage reference over temperature, radiation, and line and load regulation
  • Monotonic start-up into prebiased outputs
  • Adjustable soft start through external capacitor
  • Input enable and power-good output for power sequencing
  • Power good output monitor for undervoltage and overvoltage
  • Adjustable input undervoltage lockout (UVLO)
  • 20-pin ultra-small, thermally-enhanced ceramic flatpack package (HKH) for space applications
  • Radiation performance:
    • Radiation-hardness-assured up to TID 100 krad(Si)
    • SEL, SEB, and SEGR immune to LET = 75 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 75 MeV-cm2/mg
  • Peak efficiency: 96.9% (VO = 2.5 V)
  • Integrated 50-mΩ and 35-mΩ MOSFETs
  • Power rail: 3 to 5.5 V on VIN
  • 3-A maximum output current
  • Flexible switching frequency options:
    • 100-kHz to 1-MHz adjustable internal oscillator
    • External sync capability: 100 kHz to 1 MHz
    • SYNC pin can be configured as a 500-kHz output for primary-secondary applications
  • 0.807-V ±1.5% voltage reference over temperature, radiation, and line and load regulation
  • Monotonic start-up into prebiased outputs
  • Adjustable soft start through external capacitor
  • Input enable and power-good output for power sequencing
  • Power good output monitor for undervoltage and overvoltage
  • Adjustable input undervoltage lockout (UVLO)
  • 20-pin ultra-small, thermally-enhanced ceramic flatpack package (HKH) for space applications

The TPS7H4002-SP is a radiation hardened, 5.5-V, 3-A synchronous step-down converter, which is optimized for small designs through high efficiency and by integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and a high switching frequency, which reduces the inductor footprint.

The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins. In addition, the TPS7H4002-SP can be configured in primary-secondary mode for parallel operation.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part when die temperature exceeds thermal limit.

The TPS7H4002-SP is a radiation hardened, 5.5-V, 3-A synchronous step-down converter, which is optimized for small designs through high efficiency and by integrating the high-side and low-side MOSFETs. Further space savings are achieved through current mode control, which reduces component count, and a high switching frequency, which reduces the inductor footprint.

The output voltage startup ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is also possible by correctly configuring the enable and the open drain power good pins. In addition, the TPS7H4002-SP can be configured in primary-secondary mode for parallel operation.

Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current limit which prevents current runaway. There is also a low-side sinking current limit which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part when die temperature exceeds thermal limit.

Download

Similar products you might be interested in

open-in-new Compare products
Similar functionality to the compared device.
TPS50601A-SP ACTIVE Radiation-hardness-assured (RHA), 3-V to 7-V input, 6-A synchronous step-down converter 6-A Radiation-hardened-assured (RHA) option in ceramic package.
TPS7H4001-SP ACTIVE Radiation-hardness-assured (RHA), 3-V to 7-V input, 18-A, synchronous step-down converter 18-A product has the ability to parallel devices together to scale the solution up to 72 A.

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 14
Type Title Date
* Data sheet TPS7H4002-SP Radiation-Hardness-Assured 3-V to 5.5-V Input, 3-A Synchronous Step Down Converter datasheet (Rev. A) 18 Aug 2021
* SMD TPS7H4002-SP SMD 5962-20210 02 Sep 2021
* Radiation & reliability report TPS7H4002-SP Total Ionizing Dose (TID) (Rev. A) 31 Aug 2021
* Radiation & reliability report TPS7H4002-SP Neutron Displacement Damage (NDD) Characterization 28 Jul 2021
* Radiation & reliability report Single-Event Effects Test Report of the TPS7H4002-SP Sync Step-Down Converter 10 Jun 2021
User guide TPS7H4002EVM-CVAL Evaluation Module User's Guide 25 May 2021
Selection guide TI Space Products (Rev. H) 27 Jan 2021
Application note DLA Standard Microcircuit Drawings (SMD) and JAN Part Numbers Primer 21 Aug 2020
Application note Heavy Ion Orbital Environment Single-Event Effects Estimations 18 May 2020
Application note Hermetic Package Reflow Profiles, Termination Finishes, and Lead Trim and Form 18 May 2020
Application note Single-Event Effects Confidence Interval Calculations 14 Jan 2020
More literature TI Engineering Evaluation Units vs. MIL-PRF-38535 QML Class V Processing 17 Jun 2019
E-book Radiation Handbook for Electronics (Rev. A) 21 May 2019
Technical article Minimize the impact of the MLCC shortage on your power application 29 Mar 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS7H4002EVM-CVAL — TPS7H4002-SP evaluation module for 3-A, 3-V to 5.5-V input, synchronous step-down converter

The TPS7H4002EVM-CVAL demonstrates how the radiation-hardened TPS7H4002-SP buck converter provides a regulated power rail capable of load current up to 3 A to support typical space-grade power-managemnet applications.

In stock
Limit: 5
Simulation model

TPS7H4002-SP PSpice Model

SLVMDO0.ZIP (26 KB) - PSpice Model
Simulation model

TPS7H4002-SP PSpice Transient Model

SLVMDO1.ZIP (42 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Calculation tool

TPS7H4002-SP Buck Converter Calculator

SLVRBH9.ZIP (96 KB)
Package Pins Download
(KGD) 0 View options
CFP (HKH) 20 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos