Radiation-hardened, 3.5-V to 32-V, 6-A step-down voltage converter in space-enhanced plastic

TPS7H4010-SEP

ACTIVE

Product details

Vin (Min) (V) 3.5 Vin (Max) (V) 32 Vout (Min) (V) 1 Vout (Max) (V) 30.4 Iout (Max) (A) 6 Iq (Typ) (uA) 15 Switching frequency (Min) (kHz) 350 Switching frequency (Max) (kHz) 2200 Features Enable, Forced PWM, Frequency Synchronization, Light Load Efficiency, Over Current Protection, Power Good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Fixed Operating temperature range (C) -55 to 125 Rating Space Regulated outputs (#) 1
Vin (Min) (V) 3.5 Vin (Max) (V) 32 Vout (Min) (V) 1 Vout (Max) (V) 30.4 Iout (Max) (A) 6 Iq (Typ) (uA) 15 Switching frequency (Min) (kHz) 350 Switching frequency (Max) (kHz) 2200 Features Enable, Forced PWM, Frequency Synchronization, Light Load Efficiency, Over Current Protection, Power Good, Pre-Bias Start-Up, Synchronous Rectification, Tracking, UVLO Fixed Operating temperature range (C) -55 to 125 Rating Space Regulated outputs (#) 1
WQFN (RNP) 30 24 mm² 6 x 4
  • Radiation Hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Synchronizable to external clock
  • Internal compensation
  • Power-good flag
  • Precision enable to program system UVLO
  • Fixed or adjustable soft-start time
  • Cycle-by-cycle current limiting
  • Short-circuit protection with hiccup mode
  • Thermal shutdown protection
  • Radiation Hardened
    • SEL, SEB, and SEGR immune up to LET = 43 MeV-cm2/mg
    • SET and SEFI characterized up to LET = 43 MeV-cm2/mg
    • TID assured for every wafer lot up to 20 krad(Si)
    • TID characterized up to 30 krad(Si)
  • Space Enhanced Plastic
    • Controlled baseline
    • Au bondwire and NiPdAu lead finish
    • Enhanced mold compound for low outgassing
    • One fabrication, assembly and test site
    • Extended product life cycle
    • Extended product change notification
    • Product traceability
  • Wide voltage conversion range:
    • tON-MIN = 60 ns (typical)
    • tOFF-MIN = 70 ns (typical)
  • Low MOSFET ON-resistance:
    • RDS_ON_HS = 53 mΩ (typical)
    • RDS_ON_LS = 31 mΩ (typical)
  • Adjustable frequency range: 350 kHz to 2.2 MHz
  • Synchronizable to external clock
  • Internal compensation
  • Power-good flag
  • Precision enable to program system UVLO
  • Fixed or adjustable soft-start time
  • Cycle-by-cycle current limiting
  • Short-circuit protection with hiccup mode
  • Thermal shutdown protection

The TPS7H4010-SEP is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 6 A of load current from a supply voltage ranging from 3.5 V to 32 V. The TPS7H4010-SEP provides exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, FPWM option, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The device requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limiting, and hiccup short-circuit protection.

The TPS7H4010-SEP is an easy-to-use synchronous step-down DC/DC converter capable of driving up to 6 A of load current from a supply voltage ranging from 3.5 V to 32 V. The TPS7H4010-SEP provides exceptional efficiency and output accuracy in a very small solution size. Peak current-mode control is employed. Additional features such as adjustable switching frequency, synchronization to an external clock, FPWM option, power-good flag, precision enable, adjustable soft start, and tracking provide both flexible and easy-to-use solutions for a wide range of applications. Automatic frequency foldback at light load and optional external bias improve efficiency over the entire load range. The device requires few external components and has a pinout designed for simple PCB layout with optimal EMI and thermal performance. Protection features include thermal shutdown, input undervoltage lockout, cycle-by-cycle current limiting, and hiccup short-circuit protection.

Download

Similar products you might be interested in

open-in-new Compare products
Similar functionality to the compared device.
TPS50601A-SP ACTIVE Radiation-hardness-assured (RHA), 3-V to 7-V input, 6-A synchronous step-down converter 6-A Radiation-hardened-assured (RHA) option in ceramic package.
NEW TPS7H4002-SP ACTIVE Radiation-hardness-assured (RHA), 3-V to 5.5-V input, 3-A, synchronous step-down converter 3-A Radiation-hardened-assured (RHA) option in ceramic package.

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 12
Type Title Date
* Data sheet TPS7H4010-SEP Radiation Hardened 3.5-V to 32-V, 6-A Synchronous Step-Down Voltage Converter in Space Enhanced Plastic datasheet (Rev. A) 02 Dec 2021
* Radiation & reliability report Single-Event Effects Test Report of the TPS7H4010-SEP 10 Dec 2020
* VID TPS7H4010-SEP VID V62-19623 08 Dec 2020
* Radiation & reliability report TPS7H4010-SEP Neutron Displacement Damage Characterization 30 Nov 2020
* Radiation & reliability report TPS7H4010-SEP Production Flow and Reliability Report 30 Nov 2020
* Radiation & reliability report TPS7H4010-SEP Total Ionizing Dose (TID) Radiation Report 25 Nov 2020
Selection guide TI Space Products (Rev. H) 27 Jan 2021
User guide TPS7H4010EVM User's Guide 07 Oct 2020
Technical article Space Enhanced Plastic gives designers a new solution for emerging low-Earth orbit commercial applications 03 Oct 2019
Application note Reduce the risk in NewSpace with Space Enhanced Plastic products 29 Jul 2019
E-book Radiation Handbook for Electronics (Rev. A) 21 May 2019
Technical article Minimize the impact of the MLCC shortage on your power application 29 Mar 2019

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS7H4010EVM — TPS7H4010-SEP radiation-hardened, 3.5-V to 32-V, 6-A, step-down voltage converter evaluation module

The TPS7H4010 evaluation module (EVM) demonstrates how the TPS7H4010-SEP buck converter can provide a regulated power rail capable of load current up to 6 A to support typical satellite power applications.

In stock
Limit: 50
Simulation model

TPS7H4010-SEP TINA-TI SPICE Model (Rev. A)

SNVMC39A.TSC (18 KB) - TINA-TI Spice Model
Simulation model

TPS7H4010-SEP PSpice Model

SNVMC40.ZIP (349 KB) - PSpice Model
Simulation model

TPS7H4010-SEP TINA-TI Transient SPICE Model

SNVMC53.TSC (56 KB) - TINA-TI Spice Model
Simulation model

TPS7H4010-SEP PSpice Transient Model

SNVMC54.ZIP (12683 KB) - PSpice Model
Simulation tool

PSPICE-FOR-TI — PSpice® for TI design and simulation tool

PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Package Pins Download
WQFN (RNP) 30 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos