Top
12-channel automotive 40-V high-side LED driver with FlexWire interface

TPS929121-Q1

ACTIVE

Product details

Parameters

Topology Current Source Vin (Min) (V) 4.5 Vin (Max) (V) 40 Iout (Max) (A) 0.075 Iq (Typ) (mA) 10 Operating temperature range (C) -40 to 125 Features Enable/Shutdown, Fault Detection, Fault Diagnostic, LED Open Detection, LED Short to Ground Detection, LED Weak Supply Diagnostics, PWM Dimming, Reference Resistor Open or Short Detection, Thermal Error Flag, Thermal Prewarning and Shutdown, Thermal Shutdown open-in-new Find other Automotive LED drivers

Package | Pins | Size

HTSSOP (PWP) 24 34 mm² 7.7 x 4.4 open-in-new Find other Automotive LED drivers

Features

  • AEC-Q100-qualified for automotive applications:
    • Temperature grade 1: –40°C to +125°C, TA
  • 12-channel precision high-side current output:
    • Supply voltage 4.5 V to 40 V
    • Up to 75-mA channel current set by resistor
    • 2-bit global, 6-bit independent current setting
    • High current accuracy < ±5% at 5 mA to 75 mA
    • High current accuracy < ±10% at 1 mA
    • Low voltage drop 500 mV at 50 mA
    • 12-bit independent PWM dimming
    • Programmable PWM frequency up to 20 kHz
    • Linear and exponential dimming method
  • FlexWire control interface
    • Up to 1-MHz clock frequency
    • Maximum 16 devices on one FlexWire bus
    • Up to 8-bytes data transaction in one frame
    • 5-V LDO output to supply CAN transceiver
  • Diagnostic and protection:
    • Programmable fail-safe state
    • LED open-circuit detection
    • LED short-circuit detection
    • Single-LED short-circuit diagnostic
    • Programmable low-supply detection
    • Open-drain ERR for fault indication
    • Watchdog and CRC for FlexWire interface
    • 8-Bit ADC for pin voltage measurement
    • Overtemperature protection

All trademarks are the property of their respective owners.

open-in-new Find other Automotive LED drivers

Description

With increasing demand for animation in automotive lighting, LEDs must be controlled independently. Therefore, LED drivers with digital interfaces are essential to effectively drive pixel-controlled lighting applications. In exterior lighting, multiple lamp functions are typically located on different PCB boards with off-board wires connected to each other. It is difficult for a traditional single-ended interface to meet the strict EMC requirements. By using an industrial-standard CAN physical layer, the UART-based FlexWire interface of the TPS929121-Q1 easily accomplishes long distance off-board communication without impacting EMC.

The TPS929121-Q1 is a 12-channel, 40-V high-side LED driver that controls the 8-bit output current and 12-bit PWM duty cycles. The device meets multiple regulation requirements with LED open-circuit, short-to-ground, and single LED short-circuit diagnostics. A configurable watchdog also automatically sets fail-safe states when the MCU connection is lost, and, with programmable EEPROM, TPS929121-Q1 can flexibly be set for different application scenarios.

open-in-new Find other Automotive LED drivers
Download
Similar products you might be interested in
open-in-new Compare products
Same functionality and pinout but is not an equivalent to the compared device:
TPS929120-Q1 ACTIVE 12-channel automotive 40V highside LED driver with FlexWire interface Low-supply detection threshold decreased to 5V

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 5
Type Title Date
* Datasheet TPS929121-Q1 12-Channel Automotive 40-V High-Side LED Driver With FlexWire datasheet (Rev. A) Feb. 05, 2021
Technical article Here's how body electronics and lighting technology are changing the driving experience Sep. 26, 2016
Technical article LED brightness adjustment: high-frequency PWM dimming Aug. 26, 2016
Technical article Take better selfies with innovative LED flashes Nov. 18, 2014
Technical article Solving the automotive EMI issues in new cars with all the screens Sep. 11, 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
document-generic User guide
Description
The TPS929120-Q1 evaluation module (EVM) helps designers evaluate the operation and performance of TPS929120-Q1, a 12-channel 40-V highside LED driver with FlexLED interface to individually control output current and PWM dutycycle for automotive lighting applications. It also has LED open-circuit (...)
Features
  • 12 channel individual programmable precision highside constant current output
  • Up to 1MHz clock frequency FlexLED serial interface
  • Progarmmable fail-safe mechanism with EEPROM
  • LED open-circuit, short-circuit and single-led short circuit diagnostic with built-in Auto-ADC

Design tools & simulation

SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

CAD/CAE symbols

Package Pins Download
HTSSOP (PWP) 24 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos