8-pin high-performance resonant mode LLC controller


Product details


Topology Half-Bridge, Resonant LLC Control method Voltage VCC (Min) (V) 11 VCC (Max) (V) 18 Duty cycle (Max) (%) 50 Frequency (Max) (kHz) 350 Operating temperature range (C) -40 to 125 Gate drive (Typ) (A) 0.8 Features Thermal Shutdown Rating Catalog open-in-new Find other PWM controllers & resonant controllers

Package | Pins | Size

SOIC (D) 8 19 mm² 3.91 x 4.9 open-in-new Find other PWM controllers & resonant controllers


  • Variable Switching Frequency Control
  • Programmable Minimum Switching Frequency
    With 4% Accuracy (3% Accuracy at Temperature
    Range: –20°C to 105°C)
  • Programmable Maximum Switching Frequency
  • Programmable Dead Time for Best Efficiency
  • Programmable Soft-Start Time
  • Easy ON and OFF Control
  • Overcurrent Protection
  • Overtemperature Protection
  • Bias Voltage UVLO and Overvoltage Protection
  • Integrated Gate Driver With 0.4-A Source and 0.8-
    A Sink Capability
  • Operating Temperature Range: –40°C to 125°C
  • SOIC 8-Pin Package
open-in-new Find other PWM controllers & resonant controllers


The UCC25600 high performance, resonant mode controller is designed for dc-to-dc applications using resonant topologies, especially the LLC half-bridge resonant converter. This highly integrated controller implements frequency modulation control and complete system functions in only an 8-pin package. Switching to the UCC25600 will greatly simplify the system design and layout, and improve time to market, all at a price point lower than competitive 16-pin device offerings.

The internal oscillator supports the switching frequencies from 40 kHz to 350 kHz. This high-accuracy oscillator realizes the minimum switching frequency limiting with 4% tolerance, allowing the designer to avoid over-design of the power stage and, thus, further reducing overall system cost. The programmable dead time enables zero-voltage switching with minimum magnetizing current. This maximizes system efficiency across a variety of applications. The programmable soft-start timer maximizes design flexibility demanded by the varied requirements of end equipment using a half-bridge topology. By incorporating a 0.4-A source and 0.8-A sink driving capability, a low cost, reliable gate driver transformer is a real option.

The UCC25600 delivers complete system protection functions including overcurrent, UVLO, bias supply OVP, and overtemperature protection.

open-in-new Find other PWM controllers & resonant controllers

Technical documentation

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

document-generic User guide

The UCC25600 evaluation module, EVM (HPA341), is a 300 W LLC resonant half-bridge converter, providing a regulated output voltage nominally at 12 V at maximum 300 W of load power with reinforced isolation of AC-DC off-line application between the primary and the secondary, operating (...)

  • 300 W Output Power Rating
  • High Efficiency 92% Peak and Over 91% at Full Load
  • Regulated Output Nominal of 12 V
  • Input DC Voltage of 390 V
  • Plenty of Test Points to Facilitate the Device Evaluation
  • Over-Current Protection
  • Output Over-Voltage Protection
  • Burst Operation at Light Load

Design tools & simulation

SLUM401.ZIP (98 KB) - PSpice Model
SLUM425.TSC (262 KB) - TINA-TI Reference Design
SLUM426.ZIP (34 KB) - TINA-TI Spice Model
Free Tool: Design Calculation Tool for Converters using UCC25600
UCC25600-DESIGN-CALC The UCC25600 Design Tool is an Excel Spreadsheet based calculation sheet to help design an LLC half bridge converter using UCC25600. The tool helps design the power stage and program the IC setup parameters. The power stage design includes resonant tank, primary and secondary switches and magnetic (...)
SLUC146.ZIP (175 KB)

Reference designs

Many TI reference designs include the UCC25600 Use our reference design selection tool to review and identify designs that best match your application and parameters.

CAD/CAE symbols

Package Pins Download
SOIC (D) 8 View options

Ordering & quality

Information included:
  • RoHS
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​