Top

Product details

Parameters

Number of channels (#) 2 Power switch MOSFET, IGBT, GaNFET Peak output current (A) 5 Input VCC (Min) (V) 4.5 Input VCC (Max) (V) 18 Features Enable Pin Operating temperature range (C) -40 to 140 Rise time (ns) 7 Fall time (ns) 6 Prop delay (ns) 13 Input threshold CMOS, TTL Channel input logic Inverting, Non-Inverting Input negative voltage (V) 0 Rating Catalog open-in-new Find other Low-side drivers

Package | Pins | Size

HVSSOP (DGN) 8 9 mm² 3 x 3 SOIC (D) 8 19 mm² 4.9 x 3.9 WSON (DSD) 8 9 mm² 3 x 3 open-in-new Find other Low-side drivers

Features

  • Industry-Standard Pinout
  • Two Independent Gate-Drive Channels
  • 5-A Peak Source and Sink-Drive Current
  • Independent-Enable Function for Each Output
  • TTL and CMOS Compatible Logic Threshold
    Independent of Supply Voltage
  • Hysteretic-Logic Thresholds for High Noise
    Immunity
  • Inputs and Enable Pin-Voltage Levels Not
    Restricted by VDD Pin Bias Supply Voltage
  • 4.5-V to 18-V Single-Supply Range
  • Outputs Held Low During VDD-UVLO, (Ensures
    Glitch-Free Operation at Power up and Power
    Down)
  • Fast Propagation Delays (13-ns Typical)
  • Fast Rise and Fall Times (7-ns and 6-ns Typical)
  • 1-ns Typical Delay Matching Between Two
    Channels
  • Two Outputs are in Parallel for Higher Drive
    Current
  • Outputs Held Low When Inputs Floating
  • PDIP (8), SOIC (8), MSOP (8) PowerPAD™ and
    3-mm × 3-mm WSON-8 Package Options
  • Operating Temperature Range of –40°C to 140°C
open-in-new Find other Low-side drivers

Description

The UCC2752x family of devices are dual-channel, high-speed, low-side gate-driver devices capable of effectively driving MOSFET and IGBT power switches. Using a design that inherently minimizes shoot-through current, UCC2752x can deliver high-peak current pulses of up to 5-A source and 5-A sink into capacitive loads along with rail-to-rail drive capability and extremely small propagation delay (typically 13 ns). In addition, the drivers feature matched internal propagation delays between the two channels. These delays are very well suited for applications requiring dual-gate drives with critical timing, such as synchronous rectifiers. This also enables connecting two channels in parallel to effectively increase current-drive capability or driving two switches in parallel with one input signal. The input pin thresholds are based on TTL and CMOS compatible low-voltage logic, which is fixed and independent of the VDD supply voltage. Wide hysteresis between the high and low thresholds offers excellent noise immunity.

The UCC2752x family provide the combination of three standard logic options – dual inverting, dual noninverting, one inverting and one noninverting driver. UCC27526 features a dual input design which offers flexibility of both inverting (IN– pin) and non-inverting (IN+ pin) configuration for each channel. Either IN+ or IN– pin controls the state of the driver output. The unused input pin is used for enable and disable functions. For safety purpose, internal pullup and pulldown resistors on the input pins of all the devices in UCC2752x family ensure that outputs are held LOW when input pins are in floating condition. The UCC27523, UCC27524, and UCC27525 devices feature Enable pins (ENA and ENB) to have better control of the operation of the driver applications. The pins are internally pulled up to VDD for active-high logic and are left open for standard operation.

UCC2752x family of devices are available in SOIC-8 (D), MSOP-8 with exposed pad (DGN) and 3-mm × 3-mm WSON-8 with exposed pad (DSD) packages. UCC27524 is also offered in PDIP-8 (P) package. UCC27526 is only offered in 3-mm × 3-mm WSON (DSD) package.

open-in-new Find other Low-side drivers
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 11
Type Title Date
* Datasheet UCC2752x Dual 5-A High-Speed, Low-Side Gate Driver datasheet (Rev. G) Apr. 01, 2015
Application note External Gate Resistor Selection Guide (Rev. A) Feb. 28, 2020
Application note Understanding Peak IOH and IOL Currents (Rev. A) Feb. 28, 2020
Application note Improving Efficiency of DC-DC Conversion through Layout May 07, 2019
More literature Fundamentals of MOSFET and IGBT Gate Driver Circuits (Replaces SLUP169) (Rev. A) Oct. 29, 2018
Technical articles How to achieve higher system robustness in DC drives, part 3: minimum input pulse Sep. 19, 2018
Selection guide Power Management Guide 2018 (Rev. R) Jun. 25, 2018
Technical articles How to achieve higher system robustness in DC drives, part 2: interlock and deadtime May 30, 2018
Technical articles Boosting efficiency for your solar inverter designs May 24, 2018
Technical articles How to achieve higher system robustness in DC drives, part 1: negative voltage Apr. 17, 2018
Application note Low-Side Gate Drivers With UVLO Versus BJT Totem-Pole Mar. 16, 2018

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
49
Description
The UCC2742xQ1 EVM is a high-speed dual MOSFET evaluation module that provides a test platform for a quick and easy startup of the UCC2742xQ1 driver. Powered by a single 4V to 15V external supply, and featuring a comprehensive set of test points and jumpers. All of the devices have separate input (...)
Features
  • Three different UCC2742x-Q1 devices
  • Independent signal inputs
  • Common enable pin
  • Output FET support

Design tools & simulation

SIMULATION MODEL Download
SLUM302.ZIP (50 KB) - PSpice Model
SIMULATION MODEL Download
SLUM477.ZIP (1 KB) - PSpice Model
SIMULATION TOOL Download
PSpice® for TI design and simulation tool
PSPICE-FOR-TI — PSpice® for TI is a design and simulation environment that helps evaluate functionality of analog circuits. This full-featured, design and simulation suite uses an analog analysis engine from Cadence®. Available at no cost, PSpice for TI includes one of the largest model libraries in the (...)
Features
  • Leverages Cadence PSpice Technology
  • Preinstalled library with a suite of digital models to enable worst-case timing analysis
  • Dynamic updates ensure you have access to most current device models
  • Optimized for simulation speed without loss of accuracy
  • Supports simultaneous analysis of multiple products
  • (...)

CAD/CAE symbols

Package Pins Download
HVSSOP (DGN) 8 View options
SOIC (D) 8 View options
SON (DSD) 8 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos