Product details

Control mode Primary-side regulation Frequency (Max) (kHz) 80 UVLO thresholds on/off (V) 21/7.7 Duty cycle (Max) (%) 99 Features PSR, DCM, Soft Start, Low Power, Current Limiting, Cable Compensation Operating temperature range (C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
Control mode Primary-side regulation Frequency (Max) (kHz) 80 UVLO thresholds on/off (V) 21/7.7 Duty cycle (Max) (%) 99 Features PSR, DCM, Soft Start, Low Power, Current Limiting, Cable Compensation Operating temperature range (C) -40 to 125 Rating Catalog Device type Controllers Topology Buck, Flyback
SOT-23 (DBV) 6 5 mm² 2.9 x 1.6
  • < 50-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-
    Coupler
  • Dynamic BJT Drive
  • ± 5% Voltage and Current Regulation Across Line
    and Load
  • 80-kHz Maximum Switching Frequency Enables
    High-Power Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for
    Highest Overall Efficiency
  • Wide VDD Range Allows Small Bias Capacitor
  • Output Overvoltage, Low-Line, and Overcurrent
    Protection Functions
  • Programmable Cable Compensation
  • SOT23-6 Package
  • < 50-mW No-Load Power
  • Primary-Side Regulation (PSR) Eliminates Opto-
    Coupler
  • Dynamic BJT Drive
  • ± 5% Voltage and Current Regulation Across Line
    and Load
  • 80-kHz Maximum Switching Frequency Enables
    High-Power Density Charger Designs
  • Quasi-Resonant Valley-Switching Operation for
    Highest Overall Efficiency
  • Wide VDD Range Allows Small Bias Capacitor
  • Output Overvoltage, Low-Line, and Overcurrent
    Protection Functions
  • Programmable Cable Compensation
  • SOT23-6 Package

The UCC28722 flyback power supply controller provides isolated-output constant-voltage (CV) and constant-current (CC) output regulation without the use of an optical coupler. The device processes information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

Dynamically-controlled operating states and a tailored modulation profile support high-efficiency operation at all load levels without sacrificing output transient response.

Control algorithms in the UCC28722 device allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a bipolar transistor power switch, enabling lower-cost converter design. Discontinuous conduction mode (DCM) with valley switching reduces switching losses, while modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. Output overvoltage and overcurrent as well as input undervoltage protection features help keep primary and secondary component stresses in check. The UCC28722 also allows compensation for voltage drop in the cable to be programmed with an external resistor.

The UCC28722 flyback power supply controller provides isolated-output constant-voltage (CV) and constant-current (CC) output regulation without the use of an optical coupler. The device processes information from the primary power switch and an auxiliary flyback winding for precise control of output voltage and current.

Dynamically-controlled operating states and a tailored modulation profile support high-efficiency operation at all load levels without sacrificing output transient response.

Control algorithms in the UCC28722 device allow operating efficiencies to meet or exceed applicable standards. The output drive interfaces to a bipolar transistor power switch, enabling lower-cost converter design. Discontinuous conduction mode (DCM) with valley switching reduces switching losses, while modulation of switching frequency and primary current peak amplitude (FM and AM) keeps the conversion efficiency high across the entire load and line ranges.

The controller has a maximum switching frequency of 80 kHz and always maintains control of the peak-primary current in the transformer. Output overvoltage and overcurrent as well as input undervoltage protection features help keep primary and secondary component stresses in check. The UCC28722 also allows compensation for voltage drop in the cable to be programmed with an external resistor.

Download

Technical documentation

star = Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 17
Type Title Date
* Data sheet UCC28722 Constant-Voltage, Constant-Current Controller With Primary-Side Regulation, BJT Drive datasheet (Rev. B) 30 Oct 2015
Application note Flyback Aux Winding OVP and UVLO Fault Sensing Design and Troubleshooting Tips 31 Aug 2021
Application note Common-Mode-Chokeless Bias Supply Reference Design Example 02 Jan 2020
Application note Minimize Standby Consumption for UCC287XX Family 01 Aug 2019
Application note Selecting Electrolitic Bus Capacitor for Universal Input 17 Jul 2018
Application note Maximum Output Power and Thermal Considerations for UCC28720 and UCC28722 06 Dec 2017
Application note AC-DC Non-Isolated SMPS for Single-Phase Smart Meters Based on UCC28722 (Rev. A) 02 Nov 2017
Technical article Making smart meter eFuses robust and reliable 28 Jun 2017
Technical article Powering the IoT 26 Jan 2017
Technical article A mini data concentrator for the smart grid 21 Nov 2016
Application note Troubleshooting TI PSR controllers 03 Oct 2016
Technical article Solving the biggest challenges when designing smart meter power supplies 06 Sep 2016
Application note UCC28722, Bias Supply Design Considerations for Intelligent eMeter Applications 05 Aug 2016
Application note Versatile Buck-Boost driver based on UCC28722 for 5W-9W LED Bulb 08 Dec 2015
White paper Control Challenges for Low Power AC/DC Converters 02 Oct 2015
White paper Control Challenges for Low Power AC/DC Converters (PPT) 02 Oct 2015
Application note 5-W USB Flyback Design Example Using the UCC28722 08 Jan 2014

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

UCC28720EVM-212 — UCC28720EVM-212 5W Evaluation Module for USB off-line adapter

The UCC28720EVM-212 is a 5W evaluation module for evaluating an off line adapter for USB applications. It is intended for evaluation purposes and is not intended to be an end product. The UCC28720EVM-212 converters 100V to 240V RMS input voltage down to 5V DC, with a 1A current limit for USB (...)
In stock
Limit: 3
Simulation model

UCC28722 Unencrypted PSpice Transient Model Package (Rev. A)

SLUM466A.ZIP (64 KB) - PSpice Model
Calculation tool

UCC28722 MathCad Design Tool (Rev. A)

SLUC528A.ZIP (2330 KB)
Calculation tool

UCC28722 Excel Design Tool

SLUC529.ZIP (44 KB)
Many TI reference designs include the UCC28722

Use our reference design selection tool to review and identify designs that best match your application and parameters.

Package Pins Download
SOT-23 (DBV) 6 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos