UCC28910

ACTIVE

700V Flyback switcher with constant-voltage constant-current and primary-side control

Top

Product details

Parameters

Control method Current Output power 85-265 Vac (Max) (W) 7.5 Output power 175-265 Vac (Max) (W) 9.5 Vin (Min) (V) 30 Topology Buck, Flyback Duty cycle (Max) (%) 99 Frequency (Max) (kHz) 115 UVLO thresholds on/off (V) 9.5/6.5 Operating temperature range (C) -40 to 125 open-in-new Find other Offline converters

Package | Pins | Size

SOIC (D) 7 29 mm² 4.9 x 6 open-in-new Find other Offline converters

Features

  • Constant-Voltage (CV) and Constant-Current (CC) Output Regulation Without Optical-Coupler
  • ±5% Output Voltage Regulation Accuracy
  • ±5% Output Current Regulation With AC Line and Primary Inductance Tolerance Compensation
  • 700-V Start-Up and Smart Power Management Enables <30-mW Standby Power
  • 115-kHz Maximum Switching Frequency Design for High-Power Density
  • Valley Switching and Frequency Dithering to Ease EMI Compliance
  • Thermal Shut Down
  • Low Line and Output Over-Voltage Protection
open-in-new Find other Offline converters

Description

The UCC28910 and UCC28911 are high-voltage flyback switchers that provide output voltageand current regulation without the use of an optical coupler. Both devices incorporate a 700-Vpower FET and a controller that process operating information from the flyback auxiliary windingand power FET to provide a precise output voltage and current control. The integrated high-voltage current source for startup that is switched off during device operation, and the controller current consumption is dynamically adjusted with load. Both enablethe very low stand-by power consumption.

Control algorithms in the UCC28910 and UCC28911, combining switching frequency and peakprimary current modulation, allow operating efficiencies to meet or exceed applicable standards.Discontinuous conduction mode (DCM) with valley switching is used to reduce switching losses.Built-in protection features help to keep secondary and primary component stress levels in check across the operating range. The frequency jitter helps to reduce EMI filter

open-in-new Find other Offline converters
Download

Technical documentation

= Top documentation for this product selected by TI
No results found. Please clear your search and try again. View all 14
Type Title Date
* Datasheet UCC28910, UCC28911 High-Voltage Flyback Switcher with Primary-Side Regulation and Output Current Control datasheet (Rev. D) Dec. 19, 2016
Technical articles Overcoming common design challenges in an UV sterilization box system Jul. 27, 2020
White paper Power Electronics in Motor Drives: Where is it? (Rev. A) Oct. 01, 2019
User guide PMP21384: Universal AC Input Integrated FET Buck Converter Reference Design Jun. 19, 2018
Technical articles Making a solar inverter more reliable than the sun Aug. 01, 2017
Technical articles Powering the IoT Jan. 26, 2017
Application note Troubleshooting TI PSR controllers Oct. 03, 2016
Technical articles Electric vehicle charging stations are getting smarter and charging faster Aug. 29, 2016
User guide Wi-Fi Enabled Level 1 Level 2 Electric Vehicle Service Equipment Design Guide Aug. 16, 2016
Application note Non-Isolated High-Side Buck Converter With UCC28910 Jun. 01, 2016
White paper Redefining power management through high-voltage innovation Nov. 12, 2015
White paper Control Challenges for Low Power AC/DC Converters Oct. 02, 2015
White paper Control Challenges for Low Power AC/DC Converters (PPT) Oct. 02, 2015
User guide Using the UCC28910 EVM-526 (Rev. A) Aug. 08, 2013

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Hardware development

EVALUATION BOARD Download
99
Description

Universal input 5V, 6W isolated flyback power supply with primary side control

Features
  • 5V, 6W isolated, universal input, CV, CC flyback power supply
EVALUATION BOARD Download
UCC28911 Evaluation Module
UCC28911EVM-718
99
Description

The UCC28911EVM-718 evaluation module is an offline Flyback power supply that provides isolated output voltage and current regulation without the use of an optocoupler and secondary-side feedback components. The input accepts a voltage range of 85VAC to 265VAC, 47Hz to 64Hz. The evaluation module (...)

Features
  • Isolated 7.5W, 5V output
  • Less than 20mW standby power consumption
  • Primary side regulation eliminates opto-coupler
  • Universal off-line input voltage range
  • Output over voltage protection
  • Input under voltage protection
  • Thermal Shutdown
  • Controlled start up and restart after fault Protection

Design tools & simulation

CALCULATION TOOL Download
SLUC503B.ZIP (91 KB)

Reference designs

Many TI reference designs include the UCC28910 Use our reference design selection tool to review and identify designs that best match your application and parameters.

CAD/CAE symbols

Package Pins Download
SOIC (D) 7 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos

Related videos