Home Motor drivers Actuator drivers Ultrasonic cleaning ICs
Home
Motor drivers
Actuator drivers
Ultrasonic cleaning ICs
NEW

ULC1001

ACTIVE

Configurable DSP for ultrasonic lens cleaning with current and voltage sensing and PWM output

Order now
Data sheet

ULC1001

ACTIVE
Data sheet Order now

Product details

Architecture DSP Input signal I2C Vs (min) (V) 3 Vs (max) (V) 3.6 Vout (max) (V) 0.45 Iq (typ) (mA) 7 Bandwidth (typ) (MHz) 5 Shutdown current (ISD) (µA) 1.2 Rating Catalog Operating temperature range (°C) -40 to 125
Architecture DSP Input signal I2C Vs (min) (V) 3 Vs (max) (V) 3.6 Vout (max) (V) 0.45 Iq (typ) (mA) 7 Bandwidth (typ) (MHz) 5 Shutdown current (ISD) (µA) 1.2 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN-HR (RQT) 32 22.5 mm² 5 x 4.5
  • Integrated Programmable Cleaning Modes
    • Water (expelling)
    • Deice (melting and expelling)
    • Mud (dehydrating and expelling)
    • Auto-Cleaning (detecting and expelling)
    • Custom Cleaning Modes
  • Embedded Algorithms
    • Lens System Calibration
    • Automatic Material Detection
    • Power Regulation
    • System Diagnostics
  • System Diagnostics
    • DRV290x Fault Reporting
    • Lens System Fault
    • Transducer Temperature Regulation
  • Wide Drive Frequency Range
    • High-Efficiency Direct Drive (25 kHz - 5 MHz)
    • AD Modulation (<50 kHz)
  • I2C User Interface
  • Clock Source Required
    • External Oscillator (10 MHz, 5 ppm recommended)
  • Power Supplies
    • IOVDD: 3.3 V
  • 32-pin, QFN-HR Package
  • Integrated Programmable Cleaning Modes
    • Water (expelling)
    • Deice (melting and expelling)
    • Mud (dehydrating and expelling)
    • Auto-Cleaning (detecting and expelling)
    • Custom Cleaning Modes
  • Embedded Algorithms
    • Lens System Calibration
    • Automatic Material Detection
    • Power Regulation
    • System Diagnostics
  • System Diagnostics
    • DRV290x Fault Reporting
    • Lens System Fault
    • Transducer Temperature Regulation
  • Wide Drive Frequency Range
    • High-Efficiency Direct Drive (25 kHz - 5 MHz)
    • AD Modulation (<50 kHz)
  • I2C User Interface
  • Clock Source Required
    • External Oscillator (10 MHz, 5 ppm recommended)
  • Power Supplies
    • IOVDD: 3.3 V
  • 32-pin, QFN-HR Package

The ULC1001 is a configurable PWM modulator with current and voltage sensing capabilities specifically for piezo based lens cleaning systems.

An on-chip, low-latency DSP supports Texas Instruments’ proprietary algorithms designed for lens cleaning. The ULC1001 and DRV29xx work together to create an Ultrasonic Lens Cleaning system.

The ULC1001 device is available in a 32-pin QFN-HR package for a compact PCB footprint.

The ULC1001 is a configurable PWM modulator with current and voltage sensing capabilities specifically for piezo based lens cleaning systems.

An on-chip, low-latency DSP supports Texas Instruments’ proprietary algorithms designed for lens cleaning. The ULC1001 and DRV29xx work together to create an Ultrasonic Lens Cleaning system.

The ULC1001 device is available in a 32-pin QFN-HR package for a compact PCB footprint.
open-in-new Find other Ultrasonic cleaning ICs
Download View video with transcript Video
Information

Request more information

The full data sheet, ULC1001 GUI and other design resources are available. Request now

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 4
Type Title Date
* Data sheet ULC1001 Configurable Ultrasonic PWM Modulator With I/V Sense Amplifiers datasheet (Rev. A) PDF | HTML 23 Jul 2021
Certificate ULC1001-DRV-FL-EVM EU RoHS Declaration of Conformity (DoC) 05 Apr 2023
Technical article Ultrasonic lens cleaning: A solid-state technology you didn’t know you needed 16 Dec 2022
Technical article What is ultrasonic lens cleaning technology? 05 May 2022

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

ULC1001-DRV290XEVM — ULC1001 and DRV2901 hardware evaluation bundles for ultrasonic lens cleaning (ULC)

The ULC1001-DRV290XEVM is an evaluation module (EVM) showcasing a two-chip solution of the ULC1001 configurable digital signal processor (DSP) controller and the DRV2901 piezo driver. The pair work together to provide self-cleaning functionality with features like temperature detection, lens fault (...)

View options
Package Pins Download
VQFN-HR (RQT) 32 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos