Home Power management Battery management ICs Battery charger ICs

BQ24617

ACTIVE

Standalone 1-5 cell Buck battery charge controller with 5V-24V input

Product details

Number of series cells 1, 2, 3, 4, 5 Charge current (max) (A) 10 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 2.1 Battery charge voltage (max) (V) 22 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit), Power Path Vin (min) (V) 5 Rating Catalog Operating temperature range (°C) -40 to 85
Number of series cells 1, 2, 3, 4, 5 Charge current (max) (A) 10 Vin (max) (V) 24 Cell chemistry Li-Ion/Li-Polymer Battery charge voltage (min) (V) 2.1 Battery charge voltage (max) (V) 22 Absolute max Vin (max) (V) 33 Control topology Switch-Mode Buck Control interface Standalone (RC-Settable) Features BAT temp thermistor monitoring (hot/cold profile), IINDPM (Input current limit), Power Path Vin (min) (V) 5 Rating Catalog Operating temperature range (°C) -40 to 85
VQFN (RGE) 24 16 mm² 4 x 4
  • 600-kHz NMOS-NMOS Synchronous buck converter
  • Stand-alone charger support for li-ion or li-polymer
  • 5-V to 28-V VCC Input operating range and supports 1- to 6-battery cells (BQ24610)
  • 5-V to 24-V VCC Input operating range and supports 1- to 5-battery cells (BQ24617)
  • Up to 10-A charge current and adapter current
  • High-accuracy voltage and current regulation
    • ±0.5% Charge voltage accuracy
    • ±3% Charge current accuracy
    • ±3% Adapter current accuracy
  • Integration
    • Automatic system power selection from adapter or battery
    • Non Power Path option for low total BOM cost
    • Internal loop compensation and soft start
    • Dynamic power management
  • Safety protection
    • Input overvoltage protection
    • Battery thermistor sense hot and cold charge suspend
    • Battery detection
    • Reverse protection input FET
    • Programmable safety timer
    • Charge overcurrent protection
    • Battery short protection
    • Battery overvoltage protection
    • Thermal shutdown
  • Status Outputs
    • Adapter present
    • Charger operation status
  • Charge enable pin
  • 6-V Gate drive for synchronous buck converter
  • Energy star low quiescent current Iq
    • < 15-µA Off-state battery discharge current
    • < 1.5-mA Off-state input quiescent current
  • 600-kHz NMOS-NMOS Synchronous buck converter
  • Stand-alone charger support for li-ion or li-polymer
  • 5-V to 28-V VCC Input operating range and supports 1- to 6-battery cells (BQ24610)
  • 5-V to 24-V VCC Input operating range and supports 1- to 5-battery cells (BQ24617)
  • Up to 10-A charge current and adapter current
  • High-accuracy voltage and current regulation
    • ±0.5% Charge voltage accuracy
    • ±3% Charge current accuracy
    • ±3% Adapter current accuracy
  • Integration
    • Automatic system power selection from adapter or battery
    • Non Power Path option for low total BOM cost
    • Internal loop compensation and soft start
    • Dynamic power management
  • Safety protection
    • Input overvoltage protection
    • Battery thermistor sense hot and cold charge suspend
    • Battery detection
    • Reverse protection input FET
    • Programmable safety timer
    • Charge overcurrent protection
    • Battery short protection
    • Battery overvoltage protection
    • Thermal shutdown
  • Status Outputs
    • Adapter present
    • Charger operation status
  • Charge enable pin
  • 6-V Gate drive for synchronous buck converter
  • Energy star low quiescent current Iq
    • < 15-µA Off-state battery discharge current
    • < 1.5-mA Off-state input quiescent current

The BQ2461x is a highly integrated Li-ion, Li-polymer or Lead-acid switched-mode battery charge controller. The device offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation, and charge status monitoring.

The BQ2461x charges the battery in three phases: preconditioning, constant current, and constant voltage.

Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup. The BQ2461x automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.

The BQ2461x is a highly integrated Li-ion, Li-polymer or Lead-acid switched-mode battery charge controller. The device offers a constant-frequency synchronous switching PWM controller with high-accuracy charge current and voltage regulation, charge preconditioning, termination, adapter current regulation, and charge status monitoring.

The BQ2461x charges the battery in three phases: preconditioning, constant current, and constant voltage.

Charge is terminated when the current reaches a minimum user-selectable level. A programmable charge timer provides a safety backup. The BQ2461x automatically restarts the charge cycle if the battery voltage falls below an internal threshold, and enters a low quiescent current sleep mode when the input voltage falls below the battery voltage.

Download View video with transcript Video

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 3
Type Title Date
* Data sheet BQ2461x Stand-Alone 1- to 6-Cell Synchronous Buck Battery Charger Controller datasheet (Rev. D) PDF | HTML 16 Dec 2019
Application note BQ241xx/BQ246xx Selection of Multi-Cell Standalone Switching Battery Chargers 31 Dec 2019
User guide bq2461x/bq2463x (HPA422A) Multi-Cell Synchronous Switch-Mode Charger (Rev. A) 27 Jul 2010

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

BQ24610EVM — Evaluation Module for BQ24610 Multi Cell Synchronous Switch-Mode Battery Charger

The bq2461x is highly integrated Li-ion or Li-polymer switch-mode battery charge controllers. The bq2463x is highly integrated switch-mode battery charge controllers designed specifically to charge Lithium Phosphate battery chemistries. They offer a constant-frequency synchronous PWM controller (...)

User guide: PDF
Not available on TI.com
Evaluation board

BQ24617EVM — Evaluation Module for BQ24617 Multi Cell Synchronous Switch-Mode Charger

The bq2461x is highly integrated Li-ion or Li-polymer switch-mode battery charge controllers. The bq2463x is highly integrated switch-mode battery charge controllers designed specifically to charge Lithium Phosphate battery chemistries. They offer a constant-frequency synchronous PWM controller (...)

User guide: PDF
Not available on TI.com
Calculation tool

SLUC175 bq246xx Calculation Tool V1.5

Supported products & hardware

Supported products & hardware

Products
Battery charger ICs
BQ24600 Standalone 1-6 cell Buck battery charge controller BQ24610 Standalone 1-6 cell Buck battery charge controller with 5V-28V input BQ24616 Standalone 1-6 cell Buck battery charge controller with JEITA compliance BQ24617 Standalone 1-5 cell Buck battery charge controller with 5V-24V input BQ24618 Standalone 1-6 cell Buck battery charge controller USB friendly with 5V-28V input BQ24620 Standalone 1-7 cell Buck battery charge controller for Lithium phosphate batteries BQ24630 Standalone 1-7 cell Buck battery charge controller for LiFePO4 batteries with system power BQ24640 Standalone 1-8 cell Buck battery charge controller for super capacitor BQ24650 Standalone 1-6 cell Buck battery charge controller with solar input and integrated MPPT
Package Pins Download
VQFN (RGE) 24 View options

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Recommended products may have parameters, evaluation modules or reference designs related to this TI product.

Support & training

TI E2E™ forums with technical support from TI engineers

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos