NEU

TPSF12C3

AKTIV

Aktiver Gleichtakt-EMI-Filter (AEF) für dreiphasige Systeme

Produktdetails

Device type Common-mode AEF Power supply solution AC/DC Supply voltage (max) (V) 16 Supply voltage (min) (V) 8 Number of phases 3 Iout (A) ±0.1 Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable
Device type Common-mode AEF Power supply solution AC/DC Supply voltage (max) (V) 16 Supply voltage (min) (V) 8 Number of phases 3 Iout (A) ±0.1 Rating Automotive Operating temperature range (°C) -40 to 150 TI functional safety category Functional Safety-Capable
SOT-23-THN (DYY) 14 13.692 mm² 4.2 x 3.26
  • Functional Safety-Capable
  • Voltage-sense, current-inject active EMI filter
    • Optimized for CISPR 11 and CISPR 32 Class B conducted EMI requirements
    • Low impedance for common-mode emissions over the applicable EMI frequency range (150 kHz to 3 MHz)
    • 50%+ reduction in choke size, weight and cost
    • Peak inject current of ±80 mA (typical)
    • Amplifier with unity gain bandwidth of 113 MHz
  • Wide supply voltage range of 8 V to 16 V
  • Junction temperature range of –40°C to 150°C
  • Simple external configuration for three-phase AC power systems
    • Integrated sensing filter and summing network
    • Low leakage current at line frequency
    • Simplified compensation network
  • Inherent protection features for robust design
    • Withstands surge of 6 kV (IEC 61000-4-5) with minimal external component count
    • Enable pin for remote ON and OFF control
    • VDD voltage UVLO protection with hysteresis
    • Thermal shutdown protection with hysteresis
  • 4.2-mm × 2-mm SOT-23 14-pin (DYY) package
  • Functional Safety-Capable
  • Voltage-sense, current-inject active EMI filter
    • Optimized for CISPR 11 and CISPR 32 Class B conducted EMI requirements
    • Low impedance for common-mode emissions over the applicable EMI frequency range (150 kHz to 3 MHz)
    • 50%+ reduction in choke size, weight and cost
    • Peak inject current of ±80 mA (typical)
    • Amplifier with unity gain bandwidth of 113 MHz
  • Wide supply voltage range of 8 V to 16 V
  • Junction temperature range of –40°C to 150°C
  • Simple external configuration for three-phase AC power systems
    • Integrated sensing filter and summing network
    • Low leakage current at line frequency
    • Simplified compensation network
  • Inherent protection features for robust design
    • Withstands surge of 6 kV (IEC 61000-4-5) with minimal external component count
    • Enable pin for remote ON and OFF control
    • VDD voltage UVLO protection with hysteresis
    • Thermal shutdown protection with hysteresis
  • 4.2-mm × 2-mm SOT-23 14-pin (DYY) package

The TPSF12C3 is an active filter IC designed to reduce common-mode (CM) electromagnetic interference (EMI) in three-phase AC power systems.

The active EMI filter (AEF) configured with voltage sense and current inject (VSCI) uses a capacitive multiplier circuit to emulate the Y-capacitors in a conventional passive filter design. The device senses the high-frequency noise on each power line using a set of sense capacitors and injects noise-canceling currents back into the power lines using an injection capacitor. The effective active capacitance is set by the circuit gain and the injection capacitance. The AEF sensing and injection impedances use relatively low capacitance values with small component footprints. The device includes integrated filtering, compensation and protection circuitry, and an enable input.

The TPSF12C3 provides a very low impedance path for CM noise in the frequency range of interest for EMI measurement. Enabling up to 30 dB of CM noise reduction at the lower end of specified frequency ranges (for example, 150 kHz to 3 MHz) significantly reduces the size, weight and cost of the CM filter implementation.

The TPSF12C3 is an active filter IC designed to reduce common-mode (CM) electromagnetic interference (EMI) in three-phase AC power systems.

The active EMI filter (AEF) configured with voltage sense and current inject (VSCI) uses a capacitive multiplier circuit to emulate the Y-capacitors in a conventional passive filter design. The device senses the high-frequency noise on each power line using a set of sense capacitors and injects noise-canceling currents back into the power lines using an injection capacitor. The effective active capacitance is set by the circuit gain and the injection capacitance. The AEF sensing and injection impedances use relatively low capacitance values with small component footprints. The device includes integrated filtering, compensation and protection circuitry, and an enable input.

The TPSF12C3 provides a very low impedance path for CM noise in the frequency range of interest for EMI measurement. Enabling up to 30 dB of CM noise reduction at the lower end of specified frequency ranges (for example, 150 kHz to 3 MHz) significantly reduces the size, weight and cost of the CM filter implementation.

Herunterladen Video mit Transkript ansehen Video

Ähnliche Produkte, die für Sie interessant sein könnten

Gleiche Funktionalität, gleiche Pinbelegung wie verglichener Baustein
NEU TPSF12C1 AKTIV Aktiver Gleichtakt-EMI-Filter (AEF) für einphasige Systeme Single phase
NEU TPSF12C3-Q1 AKTIV Aktiver EMI-Gleichtaktfilter (AEF) für Dreiphasensysteme in der Automobilindustrie Automotive version

Technische Dokumentation

star =Von TI ausgewählte Top-Empfehlungen für dieses Produkt
Keine Ergebnisse gefunden. Bitte geben Sie einen anderen Begriff ein und versuchen Sie es erneut.
Alle anzeigen 4
Typ Titel Datum
* Data sheet TPSF12C3 Standalone, Active, EMI Filter for Common-mode Noise Mitigation in Three-Phase, AC, Power Systems datasheet (Rev. A) PDF | HTML 28 Apr 2023
EVM User's guide TPSF12C3QEVM Active EMI Filter Evaluation Module for Three-Phase AC Power System (Rev. A) PDF | HTML 31 Jul 2023
Functional safety information TPSF12C3 Functional Safety FIT Rate, FMD, and Pin FMA PDF | HTML 11 Nov 2022
Certificate TPSF12C3QEVM EU RoHS Declaration of Conformity (DoC) 01 Nov 2022

Design und Entwicklung

Weitere Bedingungen oder erforderliche Ressourcen enthält gegebenenfalls die Detailseite, die Sie durch Klicken auf einen der unten stehenden Titel erreichen.

Evaluierungsplatine

TPSF12C3QEVM — Evaluierungsmodul TPSF12C3-Q1 für einphasigen aktiven EMI-Filter

Das Evaluierungsmodul (EVM) TPSF12C3-Q1 dient zur Demonstration der elektrische Leistung des TPSF12C3-Q1. Die Lösung verbessert den Gleichtakt (CM)-Filter für elektromagnetische Störungen (EMI) in Dreiphasen-Wechselstromanlagen. Der IC TPSF12C3-Q1 bietet einen niederohmigen Pfad für CM-Rauschen in (...)
Benutzerhandbuch: PDF | HTML
Simulationsmodell

TPSF12C3 PSPICE AC Model

SNVMCC4.ZIP (306 KB) - PSpice Model
Simulationsmodell

TPSF12C3 PSPICE TRANS Model

SNVMCC5.ZIP (345 KB) - PSpice Model
Simulationsmodell

TPSF12C3-Q1 SIMPLIS model (Rev. A)

SNVMCB7A.ZIP (294 KB) - SIMPLIS Model
Berechnungstool

TPSF12CX-DESIGN-CALC TPSF12Cx quickstart design tool for common-mode AEF

Welcome to the TPSF12C1/-Q1 and TPSF12C3/-Q1 quickstart design tool. This standalone tool facilitates and assists the power-supply engineer with the design of an AEF circuit based on this family of common-mode AEF ICs.  As such, the user can expeditiously arrive at an optimized design to meet (...)

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Filter-ICs für Stromversorgungen
TPSF12C1-Q1 Aktiver EMI-Gleichtaktfilter (AEF) für Einphasensysteme in der Automobilindustrie TPSF12C1 Aktiver Gleichtakt-EMI-Filter (AEF) für einphasige Systeme TPSF12C3-Q1 Aktiver EMI-Gleichtaktfilter (AEF) für Dreiphasensysteme in der Automobilindustrie TPSF12C3 Aktiver Gleichtakt-EMI-Filter (AEF) für dreiphasige Systeme
Hardware-Entwicklung
Evaluierungsplatine
TPSF12C1QEVM TPSF12C1-Q1 Evaluierungsmodul für einphasigen aktiven EMI-Filter TPSF12C3QEVM Evaluierungsmodul TPSF12C3-Q1 für einphasigen aktiven EMI-Filter TPSF12C1EVM-FILTER TPSF12C1 Evaluierungsmodul für einphasigen aktiven EMI-Filter
Designtool

TPSF12CX-MATHCAD TPSF12C1/-Q1 and TPSF12C3/-Q1 common-mode AEF Mathcad design file

Unterstützte Produkte und Hardware

Unterstützte Produkte und Hardware

Produkte
Filter-ICs für Stromversorgungen
TPSF12C1 Aktiver Gleichtakt-EMI-Filter (AEF) für einphasige Systeme TPSF12C1-Q1 Aktiver EMI-Gleichtaktfilter (AEF) für Einphasensysteme in der Automobilindustrie TPSF12C3 Aktiver Gleichtakt-EMI-Filter (AEF) für dreiphasige Systeme TPSF12C3-Q1 Aktiver EMI-Gleichtaktfilter (AEF) für Dreiphasensysteme in der Automobilindustrie
Hardware-Entwicklung
Evaluierungsplatine
TPSF12C1QEVM TPSF12C1-Q1 Evaluierungsmodul für einphasigen aktiven EMI-Filter TPSF12C1EVM-FILTER TPSF12C1 Evaluierungsmodul für einphasigen aktiven EMI-Filter TPSF12C3QEVM Evaluierungsmodul TPSF12C3-Q1 für einphasigen aktiven EMI-Filter
Leiterplatten-Layout

TPSF12C3QEVM PCB Layout Files

SLVRBM8.ZIP (3481 KB)
Gehäuse Pins Herunterladen
SOT-23-THN (DYY) 14 Optionen anzeigen

Bestellen & Qualität

Beinhaltete Information:
  • RoHS
  • REACH
  • Bausteinkennzeichnung
  • Blei-Finish/Ball-Material
  • MSL-Rating / Spitzenrückfluss
  • MTBF-/FIT-Schätzungen
  • Materialinhalt
  • Qualifikationszusammenfassung
  • Kontinuierliches Zuverlässigkeitsmonitoring
Beinhaltete Information:
  • Werksstandort
  • Montagestandort

Empfohlene Produkte können Parameter, Evaluierungsmodule oder Referenzdesigns zu diesem TI-Produkt beinhalten.

Support und Schulungen

TI E2E™-Foren mit technischem Support von TI-Ingenieuren

Inhalte werden ohne Gewähr von TI und der Community bereitgestellt. Sie stellen keine Spezifikationen von TI dar. Siehe Nutzungsbedingungen.

Bei Fragen zu den Themen Qualität, Gehäuse oder Bestellung von TI-Produkten siehe TI-Support. ​​​​​​​​​​​​​​

Videos