Información de empaque
| Encapsulado | Pines TSSOP (PW) | 16 |
| Rango de temperatura de funcionamiento (℃) -55 to 125 |
| Cant. de paquetes | Transportador 250 | SMALL T&R |
Características para ADC128S102-SEP
- Radiation tolerant:
- Single-event latch-up (SEL) immune up to LET = 43 MeV-cm2/mg at 125°C
- Single-event functional interrupt (SEFI) characterized up to LET = 43 MeV-cm2/mg
- Total ionizing dose (TID) RLAT/RHA characterized up to 30 krad(Si)
- Space-enhanced plastic (space
EP):
- Meets ASTM E595 outgassing specification
- Vendor item drawing (VID) V62/22608
- Military temperature range: –55°C to 125°C
- One fabrication, assembly, and test site
- Gold bond wire, NiPdAu lead finish
- Wafer lot traceability
- Extended product life cycle
- Extended product change notification
- Wide supply range:
- VA: 2.7 V to 5.25 V
- VD: 2.7 V to VA
- SPI™-, QSPI™-, MICROWIRE-, DSP-compatible
- Conversion rate: 50 kSPS to 1 MSPS
- DNL: +1.8 LSB to −0.99 LSB (maximum)
- INL: +1.6 to −1.6 LSB (maximum)
- Power consumption:
- 3-V supply: 2.7 mW (typical)
- 5-V supply: 11 mW (typical)
Descripción de ADC128S102-SEP
The ADC128S102-SEP is a low-power, eight-channel, CMOS, 12-bit analog-to-digital converter (ADC) specified for conversion throughput rates of 50 kSPS to 1 MSPS. The converter is based on a successive-approximation register (SAR) architecture with an internal track-and-hold circuit. The device can be configured to accept up to eight input signals at inputs IN0 through IN7.
The output serial data is straight binary and compatible with several standards, such as SPI, QSPI, MICROWIRE, and many common DSP serial interfaces.
The ADC128S102-SEP can be operated with independent analog and digital supplies. The analog supply (VA) can range from 2.7 V to 5.25 V, and the digital supply (VD) can range from 2.7 V to VA. Normal power consumption using a 3-V or 5-V supply is 2.3 mW and 10.7 mW, respectively. The power-down feature reduces the power consumption to 16.5 µW using a 3-V supply and 30 µW using a 5-V supply.