TPS7H4001-SP
- Radiation performance:
- Radiation-hardness-assured up to TID 100 krad(Si)
- SEL, SEB, and SEGR immune to LET = 75 MeV-cm2/mg
- SET and SEFI characterized up to LET = 75 MeV-cm2/mg
- Peak efficiency: 95.5% (VO = 1 V at 100 kHz)
- Integrated 22-mΩ and 17-mΩ MOSFETs
- Power rail: 3 V to 7 V on VIN
- Flexible switching frequency options:
- 100-kHz to 1-MHz adjustable internal oscillator
- External sync capability: 100-kHz to 1-MHz
- SYNC pins can be configured as 500-kHz clocks at 90° out of phase to parallel up to 4 devices
- 0.6-V ±1.5% voltage reference over temperature, radiation, and line and load regulation
- Monotonic start-up into prebiased outputs
- Adjustable slope compensation and soft-start
- Adjustable input enable and power-good output for power sequencing
- Power-good output monitor for undervoltage and overvoltage
- 34-pin, thermally-enhanced ceramic flatpack package (HKY) for space applications
The TPS7H4001-SP is a radiation-hardness-assured, 7-V, 18-A synchronous buck converter with integrated low-resistance high-side and low-side MOSFETs in a thermally enhanced 34-pin ceramic flatpack package. High efficiency and reduced component count are achieved through current mode control.
The output voltage start-up ramp is controlled by the SS/TR pin which allows operation as either a stand alone power supply or in tracking situations. Power sequencing is possible by correctly configuring the enable and the power good pins. The TPS7H4001-SP can be configured in primary-secondary mode and with the SYNC2 pin, four devices can be configured in parallel without an external clock.
Cycle-by-cycle current limiting on the high-side FET protects the device in overload situations and is enhanced by a low-side sourcing current protection which prevents current runaway. There is also a low-side sinking current protection which turns off the low-side MOSFET to prevent excessive reverse current. Thermal shutdown disables the part when die temperature exceeds thermal limit.
お客様が関心を持ちそうな類似製品
比較対象デバイスと類似の機能。
技術資料
設計および開発
追加の事項や他のリソースを参照するには、以下のタイトルをクリックすると、詳細ページを表示できます。
TPS7H4001EVM-CVAL — TPS7H4001 evaluation module for four-channel, 72-A, synchronous step-down converter
TPS7H4001EVM-CVAL 評価基板 (EVM) は、ASIC や FPGA への電力供給など、厳格なレギュレーション公差が必須のアプリケーションに対して TPS7H4001-SP 降圧コンバータが最大 18A のポイント・オブ・ロード (POL) 電流を供給する方法を提示します。
TPS7H4001QEVM-CVAL — TPS7H4001 evaluation module for one-channel, 18-A, synchronous step-down converter
The TPS7H4001QEVM-CVAL evaluation module (EVM) demonstrates how four TPS7H4001-SP buck converters can be configured in master/slave mode to provide a regulated power rail capable of load current up to 72 A to support typical ASIC and FPGA applications.
ALPHA-XILINX-KU060-SPACE — Xilinx Kintex® Ultrascale™ KU060 と TI の電源製品向け Alpha Data Systems 宇宙グレード FPGA 開発キット
XQRKU060 向け開発キット。モジュール型の設計を採用し、スピード・グレードが -1 の産業用 XCKU060、XRTC 互換の構成モジュール、2 個の FMC サイト、DDR3 DRAM、システム監視機能、TI の宇宙グレードのパワー・マネージメントと温度センシング・ソリューションを搭載しています。お客様の開発プロセスを迅速化します。 Alpha Data Systems は TI デベロッパー・ネットワークのメンバーです。
TPS7H4001-SP TINA Average Reference Design (Rev. A) TPS7H4001-SP TINA Average Reference Design (Rev. A)
TPS7H4001-SP TINA Transient Reference Design (Rev. A) TPS7H4001-SP TINA Transient Reference Design (Rev. A)
TPS7H4001-SP PSpice Transient Model (Rev. B) TPS7H4001-SP PSpice Transient Model (Rev. B)
TPS7H4001-SP PSpice Worst-Case Analysis (WCA) Model (Rev. A) TPS7H4001-SP PSpice Worst-Case Analysis (WCA) Model (Rev. A)
PSPICE-FOR-TI TI Design / シミュレーション・ツール向け PSpice®
設計とシミュレーション向けの環境である PSpice for TI (...)
TPS7H4001-SP Buck Converter Calculator (Rev. B) TPS7H4001-SP Buck Converter Calculator (Rev. B)
パッケージ | ピン数 | ダウンロード |
---|---|---|
(KGD) | 0 | オプションの表示 |
CFP (HKY) | 34 | オプションの表示 |
購入と品質
- RoHS
- REACH
- デバイスのマーキング
- リード端子の仕上げ / ボールの原材料
- MSL rating / リフローピーク温度
- MTBF/FIT 推定値
- 原材料組成
- 認定試験結果
- 継続的な信頼性モニタ試験結果