LMH13000
- Voltage-controlled current driver (current sink)
- Supports continuous and pulsed operation
- Continuous current: 50mA to 1A
- Pulsed current: 50mA to 5A
- Rise time (tr): 1ns rise time
- Pulsed train: up to 250MHz
- Low-current and high-current modes
- 18V tolerance on IOUT
- Supports LVDS, TTL, CMOS logic
- Wide power supply voltage: 3V to 5.5V
- Integrated thermal shutdown and power-down
The LMH13000 is a voltage-controlled current source that enables accurate current control. The LMH13000 support fast rise and fall times (< 1ns) for pulsed current-output applications. The accurate current control using the VSET pin helps adjust load currents to compensate against variations with temperature and aging.
The LMH13000 supports up to 1A-continuous or 5A-pulsed current depending on frequency, duty cycle, and heat dissipation. The LMH13000 comes in a TI proprietary HotRod™ package. This package eliminates the internal bond wires that help achieve a very low inductance in the high-current path, thereby enabling the design to achieve faster current rise and fall times. The integrated thermal shutdown protects the die in case of excessive die temperature. The LVDS inputs (EP and EN) enable control of the output current on-time, frequency, and duty cycle. The LMH13000 operates between 3V to 5.5V, with a specified ambient temperature range of –40°C to +125°C (maximum die temperature of 150°C).
기술 자료
유형 | 직함 | 날짜 | ||
---|---|---|---|---|
* | Data sheet | LMH13000 High-Speed, Pulsed- and Continuous-Output Current Driver datasheet (Rev. B) | PDF | HTML | 2025/05/02 |
EVM User's guide | LMH13000RQE Evaluation Module User's Guide (Rev. A) | PDF | HTML | 2025/04/25 | |
Technical article | LiDAR의 도약: 정밀한 장거리 감지 기능으로 더 안전한 차량 개발 | PDF | HTML | 2025/04/11 | |
Technical article | 더 선명한 비전: LIDAR 가 로봇 내비게이션을 개선하는 방법 | PDF | HTML | 2025/04/11 | |
Product overview | High Speed Amplifiers for In-Vitro Diagnostics (IVD) Analog Front End | PDF | HTML | 2025/04/10 | |
Certificate | LMH13000RQEEVM EU Declaration of Conformity (DoC) | 2025/02/07 |
설계 및 개발
추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.
LMH13000RQEEVM — LMH13000 평가 모듈
LMH13000RQEEVM은 13핀 WQFN-HR(HotRod™) 패키지의 고속 출력 전류 드라이버인 LMH13000을 위한 EVM(평가 모듈)입니다. 이 EVM은 증폭기의 기능과 다기능성을 빠르고 쉽게 시연할 수 있도록 설계되었습니다. EVM은 온보드 커넥터를 사용하여 전원, 신호 소스 및 테스트 기기에 연결할 수 있습니다. EVM은 입력/출력의 공통 50Ω 실험실 장비, 공급을 위한 바나나 커넥터, 여러 작동 모드를 손쉽게 비활성화, 활성화 또는 구성할 수 있는 점퍼로 쉽게 연결할 수 있도록 구성되어 있습니다. 또한 레이아웃은 (...)
LMH13000 TINA-TI SPICE Model and Reference Design
PSPICE-FOR-TI — TI 설계 및 시뮬레이션 툴용 PSpice®
TI 설계 및 시뮬레이션 환경용 PSpice는 기본 제공 라이브러리를 이용해 복잡한 혼합 신호 설계를 시뮬레이션할 수 있습니다. 레이아웃 및 제작에 착수하기 (...)
TINA-TI — SPICE 기반 아날로그 시뮬레이션 프로그램
패키지 | 핀 | CAD 기호, 풋프린트 및 3D 모델 |
---|---|---|
WQFN-HR (RQE) | 13 | Ultra Librarian |
주문 및 품질
- RoHS
- REACH
- 디바이스 마킹
- 납 마감/볼 재질
- MSL 등급/피크 리플로우
- MTBF/FIT 예측
- 물질 성분
- 인증 요약
- 지속적인 신뢰성 모니터링
- 팹 위치
- 조립 위치