전력 관리 AC/DC 및 DC/DC 컨버터(통합 FET)

LMM104RM0

미리 보기

1.6kW 48V~12V 조정 중간 버스 컨버터

제품 상세 정보

Rating Catalog Topology Buck Iout (max) (A) 167 Vin (max) (V) 60 Vin (min) (V) 40 Vout (max) (V) 13.6 Vout (min) (V) 11 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Alert Function, Constant current / constant voltage (CC/CV), Current Sharing, Current limit, Cycle-by-cycle over-current protection, Digital output, Enable pin, Fault Diagnostics, Fixed Output, GaN support, Integrated Current Sensing, Load Sharing, Over Temperature Protection, Over Voltage Protection, PMBus, Power good, Temperature sensing, Undervoltage Lock Out (UVLO) EMI features Integrated capacitors, Switching slew rate control Control mode Current Switching frequency (min) (kHz) 0.2 Switching frequency (max) (kHz) 0.2 Operating temperature range (°C) -40 to 125 Type Module
Rating Catalog Topology Buck Iout (max) (A) 167 Vin (max) (V) 60 Vin (min) (V) 40 Vout (max) (V) 13.6 Vout (min) (V) 11 Features Adaptive/Dynamic Voltage Scaling, Adjustable current limit, Alert Function, Constant current / constant voltage (CC/CV), Current Sharing, Current limit, Cycle-by-cycle over-current protection, Digital output, Enable pin, Fault Diagnostics, Fixed Output, GaN support, Integrated Current Sensing, Load Sharing, Over Temperature Protection, Over Voltage Protection, PMBus, Power good, Temperature sensing, Undervoltage Lock Out (UVLO) EMI features Integrated capacitors, Switching slew rate control Control mode Current Switching frequency (min) (kHz) 0.2 Switching frequency (max) (kHz) 0.2 Operating temperature range (°C) -40 to 125 Type Module
UNKNOWN (EUX) 14 See data sheet
  • Supports wide input voltage range: 40V to 60V
  • Rated output power: 1.6kW
  • Peak power: 2.4kW (< 200ms)
  • Fully regulated output voltage: 12V
  • Typical peak efficiency: 97.6% at 48V and 97.6% at 54V
  • Typical full load efficiency: 96.8% at 48V and 96.6% at 54V
  • Non-isolated design
  • Typical switching frequency: 200kHz
  • Supports PMBus communication
  • Fully protected:
    • Input UVLO
    • Input OVP
    • Output OVP
    • Output OCP
    • OTP
  • Typical output voltage ripple: 100mV
  • Heat spreader for top side cooling
  • Mechanical dimensions: 58.4mm × 36.8mm × 15.5mm
  • Supports wide input voltage range: 40V to 60V
  • Rated output power: 1.6kW
  • Peak power: 2.4kW (< 200ms)
  • Fully regulated output voltage: 12V
  • Typical peak efficiency: 97.6% at 48V and 97.6% at 54V
  • Typical full load efficiency: 96.8% at 48V and 96.6% at 54V
  • Non-isolated design
  • Typical switching frequency: 200kHz
  • Supports PMBus communication
  • Fully protected:
    • Input UVLO
    • Input OVP
    • Output OVP
    • Output OCP
    • OTP
  • Typical output voltage ripple: 100mV
  • Heat spreader for top side cooling
  • Mechanical dimensions: 58.4mm × 36.8mm × 15.5mm

The LMM104RM0 module is an evolution within the TI intermediate bus converters family. This module is a high-efficiency, regulated, non-isolated, 1.6kW thermal design power (TDP), in a standard quarter-brick footprint. The modular design provides a high-power density power conversion from 48V bus to a regulated 12V output, with options for parallel connection with multiple modules and current sharing through active-current control.

The LMM104RM0 module is an evolution within the TI intermediate bus converters family. This module is a high-efficiency, regulated, non-isolated, 1.6kW thermal design power (TDP), in a standard quarter-brick footprint. The modular design provides a high-power density power conversion from 48V bus to a regulated 12V output, with options for parallel connection with multiple modules and current sharing through active-current control.

다운로드 스크립트와 함께 비디오 보기 동영상
Request more information

The full data sheet and additional document(s), resources etc. are available. Request now

기술 자료

star =TI에서 선정한 이 제품의 인기 문서
검색된 결과가 없습니다. 검색어를 지우고 다시 시도하십시오.
2개 모두 보기
유형 직함 날짜
* Data sheet LMM104RM0 Regulated 48V − 12V Intermediate Bus Converter datasheet PDF | HTML 2025/09/30
Technical article Power delivery trade-offs when preparing for the next wave of AI computing growth PDF | HTML 2025/10/10

설계 및 개발

추가 조건 또는 필수 리소스는 사용 가능한 경우 아래 제목을 클릭하여 세부 정보 페이지를 확인하세요.

설계 툴

LMM104RM0-DESIGN 1.6kW 48-to-12V regulated intermediate bus converter

1.6kW 48-to-12V regulated intermediate bus converter
지원되는 제품 및 하드웨어

지원되는 제품 및 하드웨어

제품
AC/DC 및 DC/DC 컨버터(통합 FET)
LMM104RM0 1.6kW 48V~12V 조정 중간 버스 컨버터
패키지 CAD 기호, 풋프린트 및 3D 모델
UNKNOWN (EUX) 14 Ultra Librarian

주문 및 품질

포함된 정보:
  • RoHS
  • REACH
  • 디바이스 마킹
  • 납 마감/볼 재질
  • MSL 등급/피크 리플로우
  • MTBF/FIT 예측
  • 물질 성분
  • 인증 요약
  • 지속적인 신뢰성 모니터링
포함된 정보:
  • 팹 위치
  • 조립 위치

권장 제품에는 본 TI 제품과 관련된 매개 변수, 평가 모듈 또는 레퍼런스 디자인이 있을 수 있습니다.

지원 및 교육

TI 엔지니어의 기술 지원을 받을 수 있는 TI E2E™ 포럼

콘텐츠는 TI 및 커뮤니티 기고자에 의해 "있는 그대로" 제공되며 TI의 사양으로 간주되지 않습니다. 사용 약관을 참조하십시오.

품질, 패키징, TI에서 주문하는 데 대한 질문이 있다면 TI 지원을 방문하세요. ​​​​​​​​​​​​​​

동영상