Home Power management AC/DC & DC/DC converters (integrated FET)
Home
Power management
AC/DC & DC/DC converters (integrated FET)

TPS62869

ACTIVE

5.5-V 6-A synchronous step-down converter with I²C interface in 1.5-mm x 2.5-mm QFN package

Order now
Data sheet

TPS62869

ACTIVE
Data sheet Order now

Product details

Iout (max) (A) 6 Vin (min) (V) 2.4 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed, VID Interface Control mode DCS-Control Vout (min) (V) 0.2, 0.4, 0.8 Vout (max) (V) 0.8375, 1.675, 3.35 Rating Catalog Operating temperature range (°C) -40 to 125
Iout (max) (A) 6 Vin (min) (V) 2.4 Vin (max) (V) 5.5 Topology Buck Type Converter Switching frequency (min) (kHz) 2400 Switching frequency (max) (kHz) 2400 Features Adaptive/Dynamic Voltage Scaling, Enable, Forced PWM, I2C/PMBus, Light Load Efficiency, Light load efficiency, Output discharge, Over Current Protection, Power good, Soft Start Fixed, Synchronous Rectification, UVLO Fixed, UVLO fixed, VID Interface Control mode DCS-Control Vout (min) (V) 0.2, 0.4, 0.8 Vout (max) (V) 0.8375, 1.675, 3.35 Rating Catalog Operating temperature range (°C) -40 to 125
VQFN-HR (RQY) 9 3.75 mm² 2.5 x 1.5
  • 11-mΩ and 10.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-Control topology for fast transient response
  • Available output voltage ranges for dynamic voltage scaling (DVS) through I2C
    • Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
    • Output voltage range from 0.4-V to 1.675-V with 5-mV step size
    • Output voltage range from 0.8-V to 3.35-V with 10-mV step size
  • 1% output voltage accuracy
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C target address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option with window comparator
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
  • Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
  • Create a custom design using with TPS62868/9 with the WEBENCH Power Designer
  • 11-mΩ and 10.5-mΩ internal power MOSFETs
  • >90% efficiency (0.9-V output)
  • DCS-Control topology for fast transient response
  • Available output voltage ranges for dynamic voltage scaling (DVS) through I2C
    • Output voltage range from 0.2-V to 0.8375-V with 2.5-mV step size
    • Output voltage range from 0.4-V to 1.675-V with 5-mV step size
    • Output voltage range from 0.8-V to 3.35-V with 10-mV step size
  • 1% output voltage accuracy
  • 2.4-MHz switching frequency
  • Selection by external resistor
    • Start-up output voltage
    • I2C target address
  • Selection by I2C interface
    • Power save mode or forced PWM mode
    • Output discharge
    • Hiccup or latching short-circuit protection
    • Output voltage ramp speed
  • Thermal pre-warning and thermal shutdown
  • Power good indicator pin option with window comparator
  • I2C-compatible interface up to 3.4 Mbps
  • Available in 1.5-mm x 2.5-mm x 1.0-mm 9-pin QFN package with 0.5-mm pitch
  • Also available in WCSP package: TPS62866, 6-A synchronous step-down converter with I2C interface in 1.05-mm x 1.78-mm WCSP package
  • Create a custom design using with TPS62868/9 with the WEBENCH Power Designer

The TPS62868 and TPS62869 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-Control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Through the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.

The TPS62868 and TPS62869 devices are high-frequency synchronous step-down converters with I2C interface which provide an efficient, adaptive, and high power-density solution. At medium to heavy loads, the converter operates in PWM mode and automatically enters Power Save Mode operation at light load to maintain high efficiency over the entire load current range. The device can also be forced in PWM mode operation for smallest output voltage ripple. Together with its DCS-Control architecture, excellent load transient performance and tight output voltage accuracy are achieved. Through the I2C interface and a dedicated VID pin, the output voltage is quickly adjusted to adapt the power consumption of the load to the ever-changing performance needs of the application.
open-in-new Find other AC/DC & DC/DC converters (integrated FET)
Download View video with transcript Video
Information

Request samples

Preproduction samples are available (XPS628691ARQYR). Request now

Similar products you might be interested in

open-in-new Compare alternates
Pin-for-pin with same functionality to the compared device
TPS62868 ACTIVE 5.5-V 4-A synchronous step-down converter with I²C interface in 1.5-mm x 2.5-mm QFN package Lower output current alternative.
Similar functionality to the compared device
TPS54678 ACTIVE 2.95V to 6V Input, 6A Synchronous Step-Down SWIFT™ Converter with Hiccup Current Limit Previous generation device with I2C interface.
TPS62480 ACTIVE 6A, 2.4V-5.5V input, Synchronous step-down converter with PG Output, Adjust. Soft-start and Optional Previous generation device with dual phase.
TPSM82866A ACTIVE 2.4-V to 5.5-V Input, 6-A thin step-down power module with integrated inductor in 3.5-mm x 4-mm QFN DC/DC module alternative in overmolded QFN.

Technical documentation

star =Top documentation for this product selected by TI
No results found. Please clear your search and try again.
View all 10
Type Title Date
* Data sheet TPS62868x 2.4-V to 5.5-V Input, 4-A/6-A Synchronous Step-Down Converter with I2C Interface in QFN Package datasheet (Rev. B) PDF | HTML 12 Jul 2021
Application note Benefiting from Step-Down Converters with an I2C Communication Interface (Rev. B) PDF | HTML 29 Nov 2023
Application note Intro to Multi-Function Pins and Their Applications in TI Step-Down Converters (Rev. A) PDF | HTML 17 Nov 2022
Application note Understanding SOA Curves to Operate at High Output Currents and Temperature PDF | HTML 05 May 2022
User guide TPS62869EVM-118 Evaluation Module (Rev. B) PDF | HTML 05 Nov 2021
EVM User's guide TPS628690EVM-135 Evaluation Module PDF | HTML 10 May 2021
White paper Enabling Higher Data Rates for Optical Modules With Small and Efficient Power 22 Mar 2021
Application note Thermal Performance Optimization of High Power Density Buck Converters PDF | HTML 23 Feb 2021
Certificate TPS62869EVM-118 EU Declaration of Conformity (DoC) 21 Jul 2020
Technical article Advantages of scalability: from Peter Parker to pin-strapping PDF | HTML 30 Apr 2020

Design & development

For additional terms or required resources, click any title below to view the detail page where available.

Evaluation board

TPS628690EVM-135 — TPS62869 evaluation module 5.5-V input, 6-A output step-down buck converter with 1% accuracy

The TPS628690EVM-135 evaluation module (EVM) facilitates the evaluation of the TPS62869, a 6-A step-down converter with DCS-Controlin in a small 1.5-mm by 2.5-mm QFN package solution. The EVM creates output voltages between 0.2 V and 0.8375 V with 1% accuracy output voltages from higher input (...)

User guide: PDF | HTML
View options
Evaluation board

TPS62869EVM-118 — High power density 6-A step-down converter evaluation module with I2C interface

The TPS62869EVM-x (BSR118) evaluation module (EVM) facilitates the evaluation of the TPS62869 family of 6-A, step-down converter with DCS-Control in a small 1.5-mm by 2.5-mm QFN package solution. The EVM creates output voltages between 0.4 V and 1.675 V with 1% accuracy output voltages from higher (...)
User guide: PDF | HTML
View options
Simulation model

TPS6286900C PSpice Unencrypted Transient Model (Rev. A)

SLUM786A.ZIP (307 KB) - PSpice Model
Download
Simulation model

TPS628690A PSpice Unencrypted Transient Model (Rev. A)

SLUM777A.ZIP (281 KB) - PSpice Model
Download
Simulation model

TPS6286910C PSpice Unencrypted Transient Model Package (Rev. A)

SLUM783A.ZIP (303 KB) - PSpice Model
Download
Simulation model

TPS628691A PSpice Unencrypted Transient Model Package

SLUM779.ZIP (281 KB) - PSpice Model
Download
Simulation model

TPS6286920C PSpice Unencrypted Transient Model (Rev. A)

SLUM785A.ZIP (305 KB) - PSpice Model
Download
Simulation model

TPS628692A PSpice Unencrypted Transient Model

SLUM778.ZIP (283 KB) - PSpice Model
Download
Package Pins Download
VQFN-HR (RQY) 9 View options
TI's Standard Terms and Conditions for Evaluation Items apply.

Ordering & quality

Information included:
  • RoHS
  • REACH
  • Device marking
  • Lead finish/Ball material
  • MSL rating/Peak reflow
  • MTBF/FIT estimates
  • Material content
  • Qualification summary
  • Ongoing reliability monitoring
Information included:
  • Fab location
  • Assembly location

Support & training

TI E2E™ forums with technical support from TI engineers

View all forum topics

Content is provided "as is" by TI and community contributors and does not constitute TI specifications. See terms of use.

If you have questions about quality, packaging or ordering TI products, see TI support. ​​​​​​​​​​​​​​

Videos