封裝資訊
| 封裝 | 引腳 VQFN (RHA) | 40 |
| 作業溫度範圍 (°C) 0 to 70 |
| 包裝數量 | 運送包裝 250 | SMALL T&R |
AFE4400 的特色
- Fully-Integrated Analog Front-End for Pulse Oximeter Applications:
- Flexible Pulse Sequencing and
Timing Control
- Flexible Pulse Sequencing and
- Transmit:
- Integrated LED Driver
(H-Bridge, Push, or Pull) - Dynamic Range: 95 dB
- LED Current:
- Programmable to 50 mA with 8-Bit Current Resolution
- Low Power:
- 100 µA + Average LED Current
- Programmable LED On-Time
- Independent LED2 and LED1 Current Reference
- Integrated LED Driver
- Receive Channel with High Dynamic Range:
- 13 Noise-Free Bits
- Low Power: < 670 µA at 3.3-V Supply
- Integrated Digital Ambient Estimation and Subtraction
- Flexible Receive Sample Time
- Flexible Transimpedance Amplifier with Programmable LED Settings
- Integrated Fault Diagnostics:
- Photodiode and LED Open and
Short Detection - Cable On and Off Detection
- Photodiode and LED Open and
- Supplies:
- Rx = 2.0 V to 3.6 V
- Tx = 3.0 V to 5.25 V
- Package: Compact VQFN-40 (6 mm × 6 mm)
- Specified Temperature Range: 0°C to 70°C
AFE4400 的說明
The AFE4400 is a fully-integrated analog front-end (AFE) ideally suited for pulse oximeter applications. The device consists of a low-noise receiver channel with an integrated analog-to-digital converter (ADC), an LED transmit section, and diagnostics for sensor and LED fault detection. The device is a very configurable timing controller. This flexibility enables the user to have complete control of the device timing characteristics. To ease clocking requirements and provide a low-jitter clock to the AFE4400, an oscillator is also integrated that functions from an external crystal. The device communicates to an external microcontroller or host processor using an SPI™ interface.
The device is a complete AFE solution packaged in a single, compact VQFN-40 package (6 mm × 6 mm) and is specified over the operating temperature range of 0°C to 70°C.