首頁 時鐘與計時 振盪器
首頁
時鐘與計時
振盪器
最新

CDC6C-Q1

預覽

車用低功率、低 ppm、突破性體聲波 (BAW) 固定頻率 LVCMOS 振盪器

立即訂購
產品規格表

CDC6C-Q1

預覽
產品規格表 立即訂購

產品詳細資料

Output frequency (MHz) 25, 27 Frequency range 250 kHz - 200 MHz Output type LVCMOS Stability (ppm) +/-25 Supply voltage (V) 1.8, 2.5, 3.3 Jitter (ps) 0.4 Operating temperature range (°C) -40 to 125
Output frequency (MHz) 25, 27 Frequency range 250 kHz - 200 MHz Output type LVCMOS Stability (ppm) +/-25 Supply voltage (V) 1.8, 2.5, 3.3 Jitter (ps) 0.4 Operating temperature range (°C) -40 to 125
VSON (DLR) 4 3.2 mm² 2 x 1.6
  • AEC Q-100 qualified:
    • Device temperature grade 1: –40°C to +125°C
  • Functional Safety-Capable:
  • LVCMOS output oscillator supporting frequency range from 250kHz to 200MHz
  • ±25ppm total frequency stability inclusive of all factors and including 10 years aging
  • Supply voltage supports 1.8V to 3.3V ±10%.
  • Very low power consumption: 4.57mA typical and 8mA maximum for 25MHz
  • Standby current 2µA typical helps for battery powered applications
  • Low jitter: < 1ps RMS jitter for Fout ≥ 10MHz
  • Smallest industry wettable flank standard package: 1.60mm × 1.20mm (DLY), 2.00mm × 1.60mm (DLR), 2.5mm × 2.00mm (DLF), 3.20mm × 2.5mm (DLN)
  • Integrated LDO for robust supply noise immunity
  • Start-up time < 3ms
    • Contact TI for different start-up times.
  • Orderable options for slow rise and fall time for EMI reduction
  • Contact TI representative for any frequency and samples needed.
  • AEC Q-100 qualified:
    • Device temperature grade 1: –40°C to +125°C
  • Functional Safety-Capable:
  • LVCMOS output oscillator supporting frequency range from 250kHz to 200MHz
  • ±25ppm total frequency stability inclusive of all factors and including 10 years aging
  • Supply voltage supports 1.8V to 3.3V ±10%.
  • Very low power consumption: 4.57mA typical and 8mA maximum for 25MHz
  • Standby current 2µA typical helps for battery powered applications
  • Low jitter: < 1ps RMS jitter for Fout ≥ 10MHz
  • Smallest industry wettable flank standard package: 1.60mm × 1.20mm (DLY), 2.00mm × 1.60mm (DLR), 2.5mm × 2.00mm (DLF), 3.20mm × 2.5mm (DLN)
  • Integrated LDO for robust supply noise immunity
  • Start-up time < 3ms
    • Contact TI for different start-up times.
  • Orderable options for slow rise and fall time for EMI reduction
  • Contact TI representative for any frequency and samples needed.

Texas Instruments’ high-precision Bulk-Acoustic Wave (BAW) micro-resonator technology is integrated directly into a package allowing for low jitter clock circuitry. BAW is fully designed and manufactured at TI factories like other silicon-based fabrication processes.

The CDC6Cx-Q1 device is a low jitter, low power, fixed-frequency oscillator which incorporates the BAW as the resonator source. The device is factory-programmed per specific frequency and function pin. With a frequency control logic and output frequency divider, the CDC6Cx-Q1 is capable of producing any frequency within the specified range providing a single device family for all frequency needs.

The high-performance clocking, mechanical stability, lower power consumption, flexibility, and small package options for this device are designed for reference clock and core clocks in automotive applications.

Texas Instruments’ high-precision Bulk-Acoustic Wave (BAW) micro-resonator technology is integrated directly into a package allowing for low jitter clock circuitry. BAW is fully designed and manufactured at TI factories like other silicon-based fabrication processes.

The CDC6Cx-Q1 device is a low jitter, low power, fixed-frequency oscillator which incorporates the BAW as the resonator source. The device is factory-programmed per specific frequency and function pin. With a frequency control logic and output frequency divider, the CDC6Cx-Q1 is capable of producing any frequency within the specified range providing a single device family for all frequency needs.

The high-performance clocking, mechanical stability, lower power consumption, flexibility, and small package options for this device are designed for reference clock and core clocks in automotive applications.
filter 尋找其它 振盪器
下載 觀看有字幕稿的影片 影片
索取更多資訊

歡迎索取樣品。立即索取

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件，然後再試一次。
檢視所有 9
類型 標題 日期
* Data sheet CDC6Cx-Q1 Low Power LVCMOS Output BAW Oscillator datasheet PDF | HTML 2025年 3月 25日
Application note Clocking Selection Guide for FPD-Link III and FPD-Link IV SerDes PDF | HTML 2025年 4月 17日
Technical article 不只是石英：BAW 時脈如何重新定義 ADAS 與 IVI PDF | HTML 2025年 4月 15日
Application brief In-Vehicle Infotainment Baw Clock Architecture PDF | HTML 2025年 4月 8日
Functional safety information CDC6C-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2025年 3月 20日
Application brief ADAS Domain Controller BAW Clock Architecture PDF | HTML 2025年 3月 19日
Application brief BAW Solutions in Automotive Front Camera Systems PDF | HTML 2025年 3月 19日
Application brief System Overview: Telematics Control Units PDF | HTML 2025年 3月 4日
EVM User's guide CDC6CEVM Evaluation Module User's Guide PDF | HTML 2024年 11月 22日

設計與開發

如需其他條款或必要資源，請按一下下方的任何標題以檢視詳細頁面 (如有)。

開發板

CDC6CEVM — CDC6C 評估模組

CDC6EVM 提供完整平台，可評估 CDC6C 低功耗 LVCMOS BAW 振盪器系列的時鐘性能和彈性。此評估模組可做為彈性時鐘來源用於合規測試、性能評估和初始系統原型設計。板載邊緣啟動 SMA 埠提供對 CDC6C 可配置時鐘輸出的存取，允許裝置使用市售同軸纜線、轉接器或平衡不平衡轉換器 (未隨附) 與測試設備和參考電路板介接。
使用指南: PDF | HTML
TI.com 無法提供
模擬工具

PSPICE-FOR-TI — PSpice® for TI 設計與模擬工具

PSpice® for TI 是有助於評估類比電路功能的設計和模擬環境。這款全功能設計和模擬套件使用 Cadence® 的類比分析引擎。PSpice for TI 包括業界最大的模型庫之一，涵蓋我們的類比和電源產品組合，以及特定類比行為模型，且使用無需支付費用。

PSpice for TI 設計和模擬環境可讓您使用其內建函式庫來模擬複雜的混合訊號設計。在進行佈局和製造之前，建立完整的終端設備設計和解決方案原型，進而縮短上市時間並降低開發成本。 

在 PSpice for TI 設計與模擬工具中，您可以搜尋 TI (...)
要求
封裝 針腳 CAD 符號、佔位空間與 3D 模型
VSON (DLR) 4 Ultra Librarian
適用 TI 的評估品項標準條款與條件。

訂購與品質

內含資訊：
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊：
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

以英文檢視所有論壇主題

內容係由 TI 和社群貢獻者依「現狀」提供，且不構成 TI 規範。檢視使用條款。

若有關於品質、封裝或訂購 TI 產品的問題，請參閱 TI 支援。​​​​​​​​​​​​​​

影片