首頁 電源管理 AC/DC 和 DC/DC 控制器 (外部 FET)

MC33063A-Q1

現行

1.5A 峰值升壓/降壓/反向切換穩壓器,符合 AEC-Q100 標準

產品詳細資料

Rating Automotive Topology Boost, Buck, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 40 Vout (min) (V) 1.25 Features Nonsynchronous rectification Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 4000 Duty cycle (max) (%) 90 TI functional safety category Functional Safety-Capable
Rating Automotive Topology Boost, Buck, Flyback, Forward, SEPIC Vin (max) (V) 40 Vin (min) (V) 3 Vout (max) (V) 40 Vout (min) (V) 1.25 Features Nonsynchronous rectification Operating temperature range (°C) -40 to 125 Iq (typ) (µA) 4000 Duty cycle (max) (%) 90 TI functional safety category Functional Safety-Capable
SOIC (D) 8 29.4 mm² 4.9 x 6
  • AEC-Q100 Qualified With the Following Results:
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4B
  • Functional Safety-Capable
  • Wide Input Voltage Range: 3V to 40V
  • High Output Switch Current: Up to 1.5A
  • Adjustable Output Voltage
  • Oscillator Frequency: Up to 100kHz
  • Precision Internal Reference: 2%
  • Short-Circuit Current Limiting
  • Low Standby Current
  • AEC-Q100 Qualified With the Following Results:
    • Device HBM ESD Classification Level 2
    • Device CDM ESD Classification Level C4B
  • Functional Safety-Capable
  • Wide Input Voltage Range: 3V to 40V
  • High Output Switch Current: Up to 1.5A
  • Adjustable Output Voltage
  • Oscillator Frequency: Up to 100kHz
  • Precision Internal Reference: 2%
  • Short-Circuit Current Limiting
  • Low Standby Current

The MC33063A-Q1 device is an easy-to-use IC containing all the primary circuitry needed for building simple DC-DC converters. The device primarily consists of an internal temperature-compensated reference, a comparator, an oscillator, a PWM controller with active current limiting, a driver, and a high-current output switch. Thus, the device requires minimal external components to build converters in the boost, buck, and inverting topologies.

The MC33063A-Q1 device is characterized for operation from –40°C to 125°C.

The MC33063A-Q1 device is an easy-to-use IC containing all the primary circuitry needed for building simple DC-DC converters. The device primarily consists of an internal temperature-compensated reference, a comparator, an oscillator, a PWM controller with active current limiting, a driver, and a high-current output switch. Thus, the device requires minimal external components to build converters in the boost, buck, and inverting topologies.

The MC33063A-Q1 device is characterized for operation from –40°C to 125°C.

下載 觀看有字幕稿的影片 影片

您可能會感興趣的類似產品

open-in-new 比較替代產品
引腳對引腳且具備與所比較裝置相同的功能
MC33063A 現行 1.5-A 升壓、降壓、反相開關穩壓器、工作溫度從 -40°C 至 85°C Non-Q1 version

技術文件

star =TI 所選的此產品重要文件
找不到結果。請清除您的搜尋條件,然後再試一次。
檢視所有 4
類型 標題 日期
* Data sheet MC33063A-Q1 1.5A Peak Boost, Buck, Inverting Switching Regulator datasheet (Rev. E) PDF | HTML 2025年 11月 14日
Functional safety information MC33063A-Q1 Functional Safety FIT Rate, FMD and Pin FMA PDF | HTML 2023年 7月 17日
Application note Adding shutdown feature to MC33063A, MC34063A switching regulators 2013年 2月 5日
Application note Application of the MC34063 Switching Regulator (Rev. B) 2007年 11月 6日

設計與開發

如需其他條款或必要資源,請按一下下方的任何標題以檢視詳細頁面 (如有)。

模擬型號

MC33063A(-Q1) Unencrypted PSpice Transient Model

SLLM444.ZIP (2 KB) - PSpice Model
模擬型號

MC33063A-Q1 TINA-TI Transient Reference Design

SLLM380.TSC (1917 KB) - TINA-TI Reference Design
模擬型號

MC33063A-Q1 TINA-TI Transient Spice Model

SLLM381.ZIP (11 KB) - TINA-TI Spice Model
參考設計

TIDA-01168 — 適用於 12-V/48-V 車用系統的雙向 DC/DC 轉換器參考設計

TIDA-01168 參考設計為一適用 12V/48V 汽車系統的四相雙向 DC-DC 轉換器開發平台。系統使用兩個 LM5170-Q1 電流控制器和一個 TMS320F28027F 微控制器 (MCU) 進行功率級控制。LM5170-Q1 子系統使用平均電流回饋進行電流控制,而 C2000™ 微控制器則提供電壓回饋。  這種控制方案可消除多相轉換器常見的相位電流平衡。以 LM5170-Q1 為基礎的系統可實現高度整合,可縮減印刷電路板 (PCB) 面積,簡化設計並加速開發。
Design guide: PDF
電路圖: PDF
封裝 針腳 CAD 符號、佔位空間與 3D 模型
SOIC (D) 8 Ultra Librarian

訂購與品質

內含資訊:
  • RoHS
  • REACH
  • 產品標記
  • 鉛塗層/球物料
  • MSL 等級/回焊峰值
  • MTBF/FIT 估算值
  • 材料內容
  • 認證摘要
  • 進行中持續性的可靠性監測
內含資訊:
  • 晶圓廠位置
  • 組裝地點

建議產品可能具有與此 TI 產品相關的參數、評估模組或參考設計。

支援與培訓

內含 TI 工程師技術支援的 TI E2E™ 論壇

內容係由 TI 和社群貢獻者依「現狀」提供,且不構成 TI 規範。檢視使用條款

若有關於品質、封裝或訂購 TI 產品的問題,請參閱 TI 支援。​​​​​​​​​​​​​​

影片